CA2RXU's LoRa Tracker
Configuration
Update
OTA
Backup
Download
Restore
Device
Reboot
Received packets
Save
Last 20 received packets list
Time*
Frame
RSSI
SNR
List refresh automatically every 15 seconds.
* - For now time is measured from board boot up.
Beacons
Add your personal configuration for each Callsign of Tracker Station.
Station Config
Aditional Configuration.
Simplified Tracker Mode
(Only Gps Beacon Tx)
Send Comment After X Beacons
GPS Beacons
Path
Fixed Beacon Rate
minutes
Standing Update Time
minutes
Send Altitude
(Instead of Velocity+Course)
Disable GPS
(For non moving Stations/TNC)
Display
OLED screen configuration.
Show Symbol Drawing
EcoMode On
Remember Station Time
minutes
Display Timeout
seconds
Turn 180ยบ
LoRa
Remember to macht your boards posible Frequencies, SF, CR4.
Wx Telemetry
Define Wx Telemetry (Wx Data will only be sended when Station doesn't move for at least 15 min)
Activate Wx Telemetry
Requires a BME/BMP280, BME680 or Si7021 sensor
Send Wx Telemetry in GPS Beacon
Temperature Correction
Celsius
BlueTooth
BT Classic or BLE Configuration.
Enable bluetooth
Bluetooth Type
BLE for iPhone
BT Classic
BLE for Android
BATTERY
BATTERY Information on GPS Beacon Configuration
Send Battery Voltage in GPS Beacon
Send as Encoded Telemetry
Force Sending Voltage Info on every GPS Beacon
Monitor Battery Voltage and power-off/sleep if low
Voltage readings to power-off/sleep to protect Battery
Volts
NOTIFICATIONS
Tx Led Active
Messsage Rx Led Active
Pin used for Tx Led
Pin
Pin used for Message Rx Led
Pin
Buzzer Active
Flashlight Pin Active
Buzzer Tone Pin
Pin
Pin used for Flashlight Pin
Pin
Buzzer Vcc Pin
Pin
Boot Up Beep
Tx Beep
Message Rx Beep
Station Rx Beep
Low Battery Beep
Shutdown Beep
PTT Trigger
PTT Active
Pin used for external Amp trigger
Pin
Time to enable trigger before Tx
miliseconds
Time to disable trigger after Tx
miliseconds
PTT in Reverse Mode
Winlink
Add your password to access Winlink.
Password
WiFi AP
Add your password to access WiFi AP.
Password
Saving settings
Please wait... Settings will be saved and LoRa will reboot
Settings
Settings saved!
System Message