added LightGateway

platformio.ini

@@ -487,3 +487,18 @@ lib_deps =
 	${common.lib_deps}
 	adafruit/Adafruit GFX Library @ 1.11.9
 	adafruit/Adafruit SSD1306 @ 2.5.10
+
+[env:QRPLabs_LightGateway_1_0]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	-Werror -Wall
+	-DLIGHTGATEWAY_1_0
+	-DHAS_SX1268
+	-DARDUINO_USB_MODE=1
+	-DARDUINO_USB_CDC_ON_BOOT=1
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps = 
+	${common.lib_deps}
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10

src/LoRa_APRS_iGate.cpp

@@ -40,7 +40,7 @@ ________________________________________________________________________________
     #include "A7670_utils.h"
 #endif
 
-String              versionDate             = "2024.10.21";
+String              versionDate             = "2024.10.25";
 Configuration       Config;
 WiFiClient          espClient;
 #ifdef HAS_GPS

src/boards_pinout.h

@@ -141,6 +141,19 @@
     #define RADIO_RST_PIN       33
 #endif
 
+#ifdef LIGHTGATEWAY_1_0
+    #define RADIO_VCC_PIN       21
+    #define RADIO_SCLK_PIN      12
+    #define RADIO_MISO_PIN      13
+    #define RADIO_MOSI_PIN      11
+    #define RADIO_CS_PIN        10
+    #define RADIO_RST_PIN       9
+    #define RADIO_DIO1_PIN      5
+    #define RADIO_BUSY_PIN      6
+    #define RADIO_RXEN          42
+    #define RADIO_TXEN          14
+#endif
+
 
 // OLED 
 #if defined(TTGO_T_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)
@@ -167,10 +180,17 @@
     #define OLED_RST    -1
 #endif
 
-#if !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3) && !defined(ESP32C3_DIY_1W_LoRa) && !defined(ESP32C3_DIY_1W_LoRa_915) && !defined(WEMOS_S2_MINI_DIY_LoRa)
+#ifdef LIGHTGATEWAY_1_0
+    #define OLED_SDA    3
+    #define OLED_SCL    4
+    #define OLED_RST    -1
+#endif
+
+#if !defined(LIGHTGATEWAY_1_0) && !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3) && !defined(ESP32C3_DIY_1W_LoRa) && !defined(ESP32C3_DIY_1W_LoRa_915) && !defined(WEMOS_S2_MINI_DIY_LoRa)
     #define HAS_DISPLAY
 #endif
 
+
 // Leds and other stuff
 #ifdef HELTEC_HTCT62
     #define BATTERY_PIN         1
@@ -256,6 +276,13 @@
     #define RADIO_BUSY_PIN      8
 #endif
 
+#ifdef LIGHTGATEWAY_1_0
+    #define BUTTON_PIN          0
+    #define INTERNAL_LED_PIN    16
+#endif
+
+
+//      GPS
 #if defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_2_915) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262)
     #define GPS_RX              12
     #define GPS_TX              34
@@ -266,6 +293,7 @@
     #define GPS_TX              33
 #endif
 
+
 /* (Same pins for LILYGO LoRa32 and ESP32 Wroom Dev )
 SX1278-------------------> ESP32 ttgo-lora32-v21 and ESP32 WROOM Dev
 GND                         GND

src/lora_utils.cpp

@@ -20,7 +20,12 @@ bool transmitFlag    = true;
     SX1262 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
 #endif
 #ifdef HAS_SX1268
+    #if defined(LIGHTGATEWAY_1_0)
+        SPIClass loraSPI(FSPI);
+        SX1268 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN, loraSPI); 
+    #else
         SX1268 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
+    #endif
 #endif
 #ifdef HAS_SX1278
     SX1278 radio = new Module(RADIO_CS_PIN, RADIO_BUSY_PIN, RADIO_RST_PIN);
@@ -42,7 +47,13 @@ namespace LoRa_Utils {
     }
 
     void setup() {
+        #ifdef LIGHTGATEWAY_1_0
+            pinMode(RADIO_VCC_PIN,OUTPUT);
+            digitalWrite(RADIO_VCC_PIN,HIGH);
+            loraSPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN, RADIO_CS_PIN);
+        #else
             SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN);
+        #endif
         float freq = (float)Config.loramodule.rxFreq / 1000000;
         #if defined(RADIO_HAS_XTAL)
             radio.XTAL = true;
@@ -70,7 +81,7 @@ namespace LoRa_Utils {
         radio.setCodingRate(Config.loramodule.codingRate4);
         radio.setCRC(true);
 
-        #if defined(RADIO_RXEN) && defined(RADIO_TXEN)
+        #if (defined(RADIO_RXEN) && defined(RADIO_TXEN)) || defined(LIGHTGATEWAY_1_0)   // QRP Labs LightGateway has 400M22S (SX1268)
             radio.setRfSwitchPins(RADIO_RXEN, RADIO_TXEN);
         #endif