WIDE and bmp add

platformio.ini

@@ -23,4 +23,5 @@ lib_deps =
 	esphome/AsyncTCP-esphome@^2.0.0
 	mikalhart/TinyGPSPlus @ 1.0.3
 	adafruit/Adafruit Unified Sensor@^1.1.9
-	adafruit/Adafruit BME280 Library@^2.2.2
+	adafruit/Adafruit BME280 Library@^2.2.2
+	adafruit/Adafruit BMP280 Library@^2.6.8

src/aprs_is_utils.cpp

@@ -107,7 +107,7 @@ namespace APRS_IS_Utils {
                   for(int i = Sender.length(); i < 9; i++) {
                     Sender += ' ';
                   }
-                  LoRa_Utils::sendNewPacket("APRS", Config.callsign + ">APLRG1,RFONLY::" + Sender + ":" + ackMessage);
+                  LoRa_Utils::sendNewPacket("APRS", Config.callsign + ">APLRG1,RFONLY,WIDE1-1::" + Sender + ":" + ackMessage);
                   receivedMessage = AddresseeAndMessage.substring(AddresseeAndMessage.indexOf(":")+1, AddresseeAndMessage.indexOf("{"));
                 } else {
                   receivedMessage = AddresseeAndMessage.substring(AddresseeAndMessage.indexOf(":")+1);

src/bme_utils.cpp

@@ -13,21 +13,33 @@ extern String         fifthLine;
 
 namespace BME_Utils {
 
+#ifndef BMPSensor
 Adafruit_BME280   bme;
+#else
+Adafruit_BMP280   bme;
+#endif
 
 void setup() {
   if (Config.bme.active) {
     bool status;
     status = bme.begin(0x76);  // Don't forget to join pins for righ direction on BME280!
     if (!status) {
-      Serial.println("Could not find a valid BME280 sensor, check wiring!");
-      show_display("ERROR", "", "BME sensor active", "but no sensor found...");
+      Serial.println("Could not find a valid BME280 or BMP280 sensor, check wiring!");
+      show_display("ERROR", "", "BME/BMP sensor active", "but no sensor found...");
       while (1); // sacar esto para que quede pegado si no encuentra BME280
     } else {
+      #ifndef BMPSensor
       Serial.println("init : BME280 Module  ...     done!");
+      #else
+      Serial.println("init : BMP280 Module  ...     done!");
+      #endif      
     }
   } else {
+    #ifndef BMPSensor
     Serial.println("(BME not 'active' in 'igate_conf.json')");
+    #else
+    Serial.println("(BMP not 'active' in 'igate_conf.json')");
+    #endif
   }
 }
 
@@ -98,7 +110,12 @@ String generatePresString(float bmePress) {
 String readDataSensor() {
   String wx, tempStr, humStr, presStr;
   float newTemp   = bme.readTemperature();
-  float newHum    = bme.readHumidity();
+  float newHum;
+  #ifndef BMPSensor
+  newHum    = bme.readHumidity();
+  #else
+  newHum = 0;
+  #endif  
   float newPress  = (bme.readPressure() / 100.0F);
   
   //bme.readAltitude(SEALEVELPRESSURE_HPA) // this is for approximate Altitude Calculation.
@@ -110,7 +127,11 @@ String readDataSensor() {
     return wx;
   } else {
     tempStr = generateTempString((newTemp * 1.8) + 32);
+    #ifndef BMPSensor
     humStr  = generateHumString(newHum);
+    #else
+    humStr  = "-99";
+    #endif
     presStr = generatePresString(newPress + (HEIGHT_CORRECTION/CORRECTION_FACTOR));
     fifthLine = "BME-> " + String(int(newTemp))+"C " + humStr + "% " + presStr.substring(0,4) + "hPa";
     wx = ".../...g...t" + tempStr + "r...p...P...h" + humStr + "b" + presStr;

src/bme_utils.h

@@ -3,7 +3,14 @@
 
 #include <Arduino.h>
 #include <Adafruit_Sensor.h>
+
+//#define BMPSensor // uncoment this line if BMP280 Module is connected instead of BME280
+
+#ifndef BMPSensor
 #include <Adafruit_BME280.h>
+#else
+#include <Adafruit_BMP280.h>
+#endif
 
 namespace BME_Utils {
 

src/lora_utils.cpp

@@ -60,7 +60,7 @@ namespace LoRa_Utils {
     aprsisPacket.trim();
     firstPart = aprsisPacket.substring(0, aprsisPacket.indexOf(","));
     messagePart = aprsisPacket.substring(aprsisPacket.indexOf("::")+2);
-    return firstPart + ",TCPIP," + Config.callsign + "::" + messagePart;
+    return firstPart + ",TCPIP,WIDE1-1," + Config.callsign + "::" + messagePart;
   }
 
   String receivePacket() {

src/query_utils.cpp

@@ -42,7 +42,7 @@ String process(String query, String station, String queryOrigin) {
   if (queryOrigin == "APRSIS") {
     return Config.callsign + ">APLRG1,TCPIP,qAC::" + station + ":" + answer + "\n";
   } else { //} if (queryOrigin == "LoRa") {
-    return Config.callsign + ">APLRG1,RFONLY::" + station + ":" + answer;
+    return Config.callsign + ">APLRG1,RFONLY,WIDE1-1::" + station + ":" + answer;
   }
 }