HWSL_V3_Display add

.github/workflows/build.yml

@@ -23,6 +23,8 @@ jobs:
                       chip: esp32s3
                     - name: heltec_wireless_stick_lite_v3
                       chip: esp32s3
+                    - name: heltec_wireless_stick_lite_v3_display
+                      chip: esp32s3
                     - name: ESP32_DIY_LoRa
                       chip: esp32
                     - name: ESP32_DIY_LoRa_915

platformio.ini

@@ -116,6 +116,17 @@ build_flags =
 lib_deps = 
 	${common.lib_deps}
 
+[env:heltec_wireless_stick_lite_v3_display]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags = 
+	-Werror -Wall
+	-DHELTEC_WSL_V3_DISPLAY
+	-DHAS_SX1262
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps = 
+	${common.lib_deps}
+
 [env:ESP32_DIY_LoRa]
 board = esp32dev
 build_flags = 

src/LoRa_APRS_iGate.cpp

@@ -38,7 +38,7 @@ ________________________________________________________________________________
     #include "A7670_utils.h"
 #endif
 
-String          versionDate             = "2024.07.10";
+String          versionDate             = "2024.07.17";
 Configuration   Config;
 WiFiClient      espClient;
 

src/boards_pinout.h

@@ -18,7 +18,7 @@
     #define RADIO_BUSY_PIN  26      // GPIO26   - SX1278 IRQ ---->DIO0
 #endif
 
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_WS)
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_WS)
     #define RADIO_SCLK_PIN  9   // SX1262 SCK
     #define RADIO_MISO_PIN  11  // SX1262 MISO
     #define RADIO_MOSI_PIN  10  // SX1262 MOSI
@@ -163,13 +163,16 @@
     #define BATTERY_PIN         37
     #define ADC_CTRL            21
 #endif
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WS)
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WS)
     #define INTERNAL_LED_PIN    35
     #define BATTERY_PIN         1
     #define VEXT_CTRL           36
     #define ADC_CTRL            37 // Heltec WSL_V3 just like Heltec WT
     #define BOARD_I2C_SDA       41
     #define BOARD_I2C_SCL       42
+    #ifdef HELTEC_WSL_V3_DISPLAY
+        #define OLED_RST    -1
+    #endif
 #endif
 
 #if defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_LoRa_915) || defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915)

src/display.cpp

@@ -21,9 +21,13 @@
         #if defined(HELTEC_V3)
             #define OLED_DISPLAY_HAS_RST_PIN
         #endif
+        #ifdef HELTEC_WSL_V3_DISPLAY
+            Adafruit_SSD1306 display(128, 64, &Wire1, OLED_RST);
+        #else
             Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST);
         #endif
     #endif
+#endif
     
 extern Configuration Config;
 
@@ -55,7 +59,10 @@ void setup_display() {
                 delay(20);
                 digitalWrite(OLED_RST, HIGH);
             #endif
+
+            #ifndef HELTEC_WSL_V3_DISPLAY
                 Wire.begin(OLED_SDA, OLED_SCL);
+            #endif
 
             if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { 
                 Serial.println(F("SSD1306 allocation failed"));

src/power_utils.cpp

@@ -164,7 +164,7 @@ namespace POWER_Utils {
             Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
 
-        #ifdef HELTEC_V3
+        #if defined(HELTEC_V3) || defined(HELTEC_WSL_V3_DISPLAY)
             Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif