From 1daf6a267a867e406b2564adb918df24dcfee9df Mon Sep 17 00:00:00 2001
From: M0IGA <ham-radio@gmx.com>
Date: Sat, 24 Apr 2021 12:14:45 +0100
Subject: [PATCH] Higher up tx power

---
 lib/BG_RF95/BG_RF95.cpp | 6 +++---
 lib/BG_RF95/BG_RF95.h   | 2 +-
 platformio.ini          | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/lib/BG_RF95/BG_RF95.cpp b/lib/BG_RF95/BG_RF95.cpp
index 2b63780..9d0e27b 100644
--- a/lib/BG_RF95/BG_RF95.cpp
+++ b/lib/BG_RF95/BG_RF95.cpp
@@ -114,7 +114,7 @@ bool BG_RF95::init()
     // An innocuous ISM frequency, same as RF22's
     setFrequency(433.850);
     // Lowish power
-    setTxPower(20);
+    setTxPower(23);
 
     return true;
 }
@@ -390,7 +390,7 @@ void BG_RF95::setTxPower(int8_t power, bool useRFO)
     // for the transmitter output
     if (useRFO)
     {
-	if (power > 14)  power = 14;
+	if (power > 19)  power = 19;
 	if (power < -1)  power = -1;
 	spiWrite(BG_RF95_REG_09_PA_CONFIG, BG_RF95_MAX_POWER | (power + 1));
     } else {
@@ -405,7 +405,7 @@ void BG_RF95::setTxPower(int8_t power, bool useRFO)
 		spiWrite(BG_RF95_REG_0B_OCP, ( BG_RF95_OCP_ON | BG_RF95_OCP_TRIM ) );   // Trim max current tp 240mA
 	    	spiWrite(BG_RF95_REG_4D_PA_DAC, BG_RF95_PA_DAC_ENABLE);
 	    //power -= 3;
-		power = 20;  // and set PA_DAC_ENABLE
+		power = 23;  // and set PA_DAC_ENABLE
 
 	} else {
 	    spiWrite(BG_RF95_REG_4D_PA_DAC, BG_RF95_PA_DAC_DISABLE);
diff --git a/lib/BG_RF95/BG_RF95.h b/lib/BG_RF95/BG_RF95.h
index cd43844..cc18a49 100644
--- a/lib/BG_RF95/BG_RF95.h
+++ b/lib/BG_RF95/BG_RF95.h
@@ -461,7 +461,7 @@
 /// -1 to +14 (for modules that use RFO transmitter pin)
 /// The default is 13. Eg:
 /// \code
-/// driver.setTxPower(10); // use PA_BOOST transmitter pin
+/// driver.setTxPower(23); // use PA_BOOST transmitter pin
 /// driver.setTxPower(10, true); // use PA_RFO pin transmitter pin
 /// \endcode
 ///
diff --git a/platformio.ini b/platformio.ini
index e83ec42..96b1f8a 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -44,7 +44,7 @@ build_flags =
 			-D 'SHOW_RX_TIME=10000' 
 			-D 'TXFREQ=433.775'
 			-D 'SPEED_1200'				; comment out to set 300baud
-			-D 'TXdbmW=20'
+			-D 'TXdbmW=23'
 			-D 'ENABLE_OLED'
 			-D 'ENABLE_LED_SIGNALING'
 			-D 'NETWORK_TNC_PORT=8001'