ua1zbe
/
TTGO-T-Beam-LoRa-APRS2
mirror of https://github.com/oe3cjb/TTGO-T-Beam-LoRa-APRS.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

lots of new features :-)

This commit is contained in:
Christian OE3CJB Bauer 2019-11-22 14:22:31 +01:00
parent 3f1498c998
commit a52060c383
4 changed files with 195 additions and 70 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
README.md
View File

@ -1,12 +1,20 @@
First of all I want to thank OE1ACM Bernd for his approval to use his code for my experiments.
He is the author of BG_RF95!
<b>USER GUIDE of TTGO T-Beam LoRa APRS:</b><br>
First of all I want to thank OE1ACM Bernd for his approval to use his code for my experiments.<br>
He is the author of BG_RF95!<br>
<br>
If you want to discuss with other LoRa APRS interested persons join the growing community at the LoRa-APRS Telegram group<br>
<br>
<b>USER GUIDE of TTGO T-Beam LoRa APRS V1.1:</b><br>
<b>Attention: a new HW Version is available - if you use the old version uncomment "// #define T_BEAM_V0_7" and comment out "#define T_BEAM_V1_0".</b>You can recognize the new Rev1.0-Boards at their three push buttons instead of two at the older boards - both versions are now supported.<br>
As the new board only has two LEDs for the GPS and battery charger I've moved the TX Led to PIN 33 - please use a LED with reasonable resistor of 470R.<br>
<br>
<b>Callsign setting:</b><br>
If you start the FW for the first time you are asked to program your callsign and SSID(s).<br>
Once the callsign is programmed you can reenter the programming mode by pressing the BUTTON (GPIO39) for 3secs while switching on the tracker.<br>
The MODE of the tracker can now be changed by pressing button at <b>GPIO39 for 10secs</b>!<br>
Now two possibilities are implemented:<br>
1st) enter your callsign in the file TTGO_T-Beam_LoRa_APRS_<b>config</b>.h and replace the OE1XYZ-0 with your data with 6 characters plus SSID-<br>
in case of shorter callsign use "SPACES" and extend up to total length of 6 characters<br>
2nd) if you leave the config-file unchanged, you will run into a simple setup routine at the very first boot and you will be asked to enter your callsign and SSID(s).<br>
Once the callsign is programmed you can reenter the programming mode by pressing the BUTTON for 3secs while switching on the tracker.<br>
<br>
The MODE of the tracker can now be changed by pressing the button 10secs!<br>
<b>The modes are</b><br>
TRACKER ... normal APRS tracker<br>
WX&TRACKER ... alternate transmission of normal position packet and WX packet (if DHT22 is mounted)<br>
@ -17,6 +25,12 @@ The <b>fixed position</b> is used for a fixed weather station, e.g. without GPS
<br>
Possible symbols are<br>
Weather Station, Car, Runner, Bicyle, Motorcycle<br>
for DHT22 I used the library from https://github.com/beegee-tokyo/DHTesp, as the standard library gives to many wrong readings
<br>
for DHT22 I used the library from https://github.com/beegee-tokyo/DHTesp, as the standard library gives to many wrong readings<br>
<br>
new features:<br>
- preset of callsign and SSID in file TTGO_T-Beam_LoRa_APRS_<b>config</b>.h --- this is the <b>only</b> you should change - if you are not familiar with programming ;-)<br>
- corrected format of speed, course and height to be shown correctly in aprs.fi and aprsdirect.com
- Smart Beaconing - the maximum period can be set in the config-file - the minimum period is limited to 60sec, the calculation is based on speeds between 0 and 50 km/h, the default is smart beaconing is off with a minimium period setting of 60secs<br>
- usage of shorter callsigns is now also possible - fill up with SPACES up to 6 characters please<br>
- support of new power management chip AXP192<br>

3
platformio.ini
View File

@ -12,3 +12,6 @@
platform = espressif32
board = heltec_wifi_lora_32
framework = arduino
; Custom Serial Monitor speed (baud rate)
monitor_speed = 115200

165
src/TTGO_T-Beam_LoRa_APRS.ino
View File

@ -11,8 +11,17 @@
//
// licensed under CC BY-NC-SA
//
// version: 1.0b
// last update: 24.12.2018
// version: V1.1beta
// last update: 22.11.2019
//
// change history
// added HW Version V1.0 support
// added presetting in the header TTGO...config.h to prevent long initial setup at first boot up
// added "SPACE" to allowed letters for callsign for shorter callsigns - has to be added at the end
// added smart beaconing
//
// version V1.0beta
// first released version//
#define DEBUG false // used for debugging purposes , e.g. turning on special serial or display logging
// Includes
@ -37,6 +46,10 @@
#include <Adafruit_SPITFT_Macros.h>
#include <gfxfont.h>
#ifdef T_BEAM_V1_0
#include <axp20x.h>
#endif
//Hardware definitions
/* for feather32u4
@ -70,20 +83,43 @@ Tx_Mode tracker_mode;
// #define ANALOG_PIN_0 35 // connected to battery
// Pins for GPS
static const int RXPin = 15, TXPin = 12; // changed BG A3 A2
#ifdef T_BEAM_V1_0
static const int RXPin = 12, TXPin = 34; // changed BG A3 A2
#else
static const int RXPin = 15, TXPin = 12; // changed BG A3 A2
#endif
static const uint32_t GPSBaud = 9600; //GPS
const byte TX_en = 0;
const byte RX_en = 0; //TX/RX enable 1W modul
const byte TXLED = 14; //pin number for LED on TX Tracker
const byte BUTTON = 39; //pin number for Button on TTGO T-Beam
// LED for signalling
#ifdef T_BEAM_V1_0
const byte TXLED = 33; //pin number for LED on TX Tracker
#else
const byte TXLED = 14; //pin number for LED on TX Tracker
#endif
// Button of TTGO T-Beam
#ifdef T_BEAM_V1_0
const byte BUTTON = 38; //pin number for Button on TTGO T-Beam
#else
const byte BUTTON = 39; //pin number for Button on TTGO T-Beam
#endif
// const byte GPSLED = 6; // pin gps & Heartbeat
// const byte GPSLED1 = 9; // pin gps & Heartbeat
// Pins for LoRa module
const byte lora_PReset = 23; //pin where LoRa device reset line is connected
const byte lora_PNSS = 18; //pin number where the NSS line for the LoRa device is connected.
//#ifdef T_BEAM_V1_0
// const byte lora_PReset = 14; //pin where LoRa device reset line is connected
// const byte lora_PNSS = 18; //pin number where the NSS line for the LoRa device is connected.
//#else
const byte lora_PReset = 23; //pin where LoRa device reset line is connected
const byte lora_PNSS = 18; //pin number where the NSS line for the LoRa device is connected.
//#endif
// pin 11 MOSI
// pin 12 MISO
// pin 13 SCLK
@ -91,7 +127,18 @@ const byte lora_PNSS = 18; //pin number where the NSS line for the LoRa device
// #define ModemConfig BG_RF95::Bw125Cr45Sf4096
#define DHTPIN 25 // pin the DHT22 is connected to Pin25
//#define DHTTYPE DHT22 // DHT 22 (AM2302)
// Variables for APRS packaging
String Tcall; //your Call Sign for normal position reports
String wxTcall; //your Call Sign for weather reports
String sTable="/"; //Primer
String wxTable="/"; //Primer
String wxSymbol="_"; //Symbol Code Weather Station
// Tracker setting: use these lines to modify the tracker behaviour
#define TXFREQ 433.775 // Transmit frequency in MHz
#define TXdbmW 18 // Transmit power in dBm
#define TXenablePA 0 // switch internal power amplifier on (1) or off (0)
// Variables and Constants
Preferences prefs;
@ -125,9 +172,14 @@ byte lora_TXPacketL; //length of packet to send, includes source, destin
unsigned long lastTX = 0L;
float BattVolts;
// variables for smart beaconing
float average_speed[5] = {0,0,0,0,0}, average_speed_final=0, max_speed=50, min_speed=0;
int point_avg_speed = 0;
ulong min_time_to_nextTX=60000L; // minimum time period between TX = 60000ms = 60secs = 1min
ulong nextTX=60000L; // preset time period between TX = 60000ms = 60secs = 1min
static const adc_atten_t atten = ADC_ATTEN_DB_6;
static const adc_unit_t unit = ADC_UNIT_1;
@ -145,6 +197,9 @@ DHTesp dht;
// SoftwareSerial ss(RXPin, TXPin); // The serial connection to the GPS device
HardwareSerial ss(1); // TTGO has HW serial
TinyGPSPlus gps; // The TinyGPS++ object
#ifdef T_BEAM_V1_0
AXP20X_Class axp;
#endif
// checkRX
uint8_t buf[BG_RF95_MAX_MESSAGE_LEN];
@ -178,6 +233,22 @@ void setup()
digitalWrite(TXLED, LOW); // turn blue LED off
Serial.begin(115200);
#ifdef T_BEAM_V1_0 // initialize power controller - new on HW V1.0
Wire.begin(21, 22);
if (!axp.begin(Wire, AXP192_SLAVE_ADDRESS)) {
Serial.println("AXP192 Begin PASS");
} else {
Serial.println("AXP192 Begin FAIL");
}
axp.setPowerOutPut(AXP192_LDO2, AXP202_ON);
axp.setPowerOutPut(AXP192_LDO3, AXP202_ON);
axp.setPowerOutPut(AXP192_DCDC2, AXP202_ON);
axp.setPowerOutPut(AXP192_EXTEN, AXP202_ON);
axp.setPowerOutPut(AXP192_DCDC1, AXP202_ON);
axp.setDCDC1Voltage(3300);
#endif
if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3D for 128x64
for(;;); // Don't proceed, loop forever
}
@ -188,11 +259,11 @@ void setup()
//////////////////////////// Setup CALLSIGN
prefs.begin("nvs", false);
Tcall = prefs.getString("Tcall", "OE1XYZ-0");
wxTcall = prefs.getString("wxTcall", "OE1XYZ-0");
LongFixed = prefs.getString("LongFixed", "01539.85E");
LatFixed = prefs.getString("LatFixed", "4813.62N");
TxSymbol = prefs.getString("TxSymbol", "[");
Tcall = prefs.getString("Tcall", CALLSIGN);
wxTcall = prefs.getString("wxTcall", WX_CALLSIGN);
LongFixed = prefs.getString("LongFixed", LONGITUDE_PRESET);
LatFixed = prefs.getString("LatFixed", LATIDUDE_PRESET);
TxSymbol = prefs.getString("TxSymbol", APRS_SYMBOL);
prefs.end();
int start_button_pressed = millis();
@ -201,7 +272,7 @@ void setup()
}
//if (((start_button_pressed+3000<millis())&&(digitalRead(BUTTON) == LOW)) || (Tcall == "OE1000-0")) {
if ((digitalRead(BUTTON) == LOW) || (Tcall == "OE1XYZ-0")) {
if ((digitalRead(BUTTON) == LOW) || (Tcall == "OE1XYZ-0")) { // into setup when no real data entered in TTGO...config.h
setup_data();
}
@ -236,13 +307,15 @@ void setup()
for(;;); // Don't proceed, loop forever
}
if (max_time_to_nextTX < nextTX) {max_time_to_nextTX=nextTX;}
digitalWrite(TXLED, HIGH);
writedisplaytext("LoRa-APRS","","Init:","RF95 OK!","","",250);
digitalWrite(TXLED, LOW);
Serial.println("Init: RF95 OK!");
if (tracker_mode != WX_FIXED) {
ss.begin(GPSBaud, SERIAL_8N1, 12, 15); //Startup HW serial for GPS
ss.begin(GPSBaud, SERIAL_8N1, TXPin, RXPin); //Startup HW serial for GPS
}
digitalWrite(TXLED, HIGH);
writedisplaytext("LoRa-APRS","","Init:","GPS Serial OK!","","",250);
@ -343,11 +416,23 @@ if (tracker_mode != WX_FIXED) {
LatShown = LatFixed;
LongShown = LongFixed;
}
average_speed[point_avg_speed] = gps.speed.kmph(); // calculate smart beaconing
++point_avg_speed;
if (point_avg_speed>4) {point_avg_speed=0;}
average_speed_final = (average_speed[0]+average_speed[1]+average_speed[2]+average_speed[3]+average_speed[4])/5;
nextTX = (max_time_to_nextTX-min_time_to_nextTX)/(max_speed-min_speed)*(max_speed-average_speed_final)+min_time_to_nextTX;
if (nextTX < min_time_to_nextTX) {nextTX=min_time_to_nextTX;}
if (nextTX > max_time_to_nextTX) {nextTX=max_time_to_nextTX;}
if (hum_temp)
{
writedisplaytext(" "+Tcall,"Time to TX: "+String(((lastTX+nextTX)-millis())/1000),"LAT: "+LatShown,"LON: "+LongShown,"SPD: "+String(gps.speed.kmph(),1)+" CRS: "+String(gps.course.deg(),1),"BAT: "+String(analogRead(35)*7.221/4096,1)+" HUM: "+String(hum,1),0);
} else {
writedisplaytext(" "+Tcall,"Time to TX: "+String(((lastTX+nextTX)-millis())/1000),"LAT: "+LatShown,"LON: "+LongShown,"SPD: "+String(gps.speed.kmph(),1)+" CRS: "+String(gps.course.deg(),1),"BAT: "+String(analogRead(35)*7.221/4096,1)+" TEMP: "+String(temp,1),0);
// writedisplaytext(" "+Tcall,"Time to TX: "+String(average_speed_final),"LAT: "+LatShown,"LON: "+LongShown,"SPD: "+String(gps.speed.kmph(),1)+" CRS: "+String(gps.course.deg(),1),"BAT: "+String(analogRead(35)*7.221/4096,1)+" TEMP: "+String(temp,1),0);
}
smartDelay(1000);
@ -419,7 +504,7 @@ static void smartDelay(unsigned long ms)
/////////////////////////////////////////////////////////////////////////////////////////
//@APA Recalc GPS Position
//@APA Recalc GPS Position == generate APRS string
void recalcGPS(){
String Ns, Ew, helper;
@ -460,7 +545,12 @@ switch(tracker_mode) {
case WX_FIXED:
hum = dht.getHumidity();
tempf = dht.getTemperature()*9/5+32;
outString = (wxTcall);
for (i=0; i<wxTcall.length();++i){ // remove unneeded "spaces" from callsign field
if (wxTcall.charAt(i) != ' ') {
outString += wxTcall.charAt(i);
}
}
// outString = wxTcall;
outString += ">APRS:!";
outString += LatFixed;
outString += wxTable;
@ -489,7 +579,12 @@ switch(tracker_mode) {
if (wx) {
hum = dht.getHumidity();
tempf = dht.getTemperature()*9/5+32;
outString = (wxTcall);
for (i=0; i<wxTcall.length();++i){ // remove unneeded "spaces" from callsign field
if (wxTcall.charAt(i) != ' ') {
outString += wxTcall.charAt(i);
}
}
// outString = (wxTcall);
outString += ">APRS:!";
if(Tlat<10) {outString += "0"; }
outString += String(Lat,2);
@ -520,7 +615,12 @@ switch(tracker_mode) {
outString += "b......DHT22";
wx = !wx;
} else {
outString = (Tcall);
for (i=0; i<Tcall.length();++i){ // remove unneeded "spaces" from callsign field
if (Tcall.charAt(i) != ' ') {
outString += Tcall.charAt(i);
}
}
// outString = (Tcall);
outString += ">APRS:!";
if(Tlat<10) {outString += "0"; }
outString += String(Lat,2);
@ -542,7 +642,12 @@ switch(tracker_mode) {
case WX_MOVE:
hum = dht.getHumidity();
tempf = dht.getTemperature()*9/5+32;
outString = (wxTcall);
for (i=0; i<wxTcall.length();++i){ // remove unneeded "spaces" from callsign field
if (wxTcall.charAt(i) != ' ') {
outString += wxTcall.charAt(i);
}
}
// outString = (wxTcall);
outString += ">APRS:!";
if(Tlat<10) {outString += "0"; }
outString += String(Lat,2);
@ -574,7 +679,12 @@ case WX_MOVE:
break;
case TRACKER:
default:
outString = (Tcall);
for (i=0; i<Tcall.length();++i){ // remove unneeded "spaces" from callsign field
if (Tcall.charAt(i) != ' ') {
outString += Tcall.charAt(i);
}
}
// outString = (Tcall);
outString += ">APRS:!";
if(Tlat<10) {outString += "0"; }
outString += String(Lat,2);
@ -707,21 +817,20 @@ void writedisplaytext(String HeaderTxt, String Line1, String Line2, String Line3
///////////////////////////////////////////////////////////////////////////////////////
void setup_data(void) {
char werte_call[36] = {'A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z','1','2','3','4','5','6','7','8','9','0'};
char werte_call[37] = {' ','A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z','1','2','3','4','5','6','7','8','9','0'};
String werte_SSID[16] = {"0","1","2","3","4","5","6","7","8","9","10","11","12","13","14","15"};
char werte_latlon[14] = {'0','1','2','3','4','5','6','7','8','9','N','S','E','W'};
String werte_TxSymbol_text[5] = {"WX Station","Auto","Fussgaenger","Fahrrad","Motorrad"};
String werte_TxSymbol_symbol[5] = {"_",">","[","b","<"};
int8_t pos_in_string;
int8_t pos_ssid, pos_latlon;
int8_t pos_ssid;
bool key_pressed = false;
int waiter;
int initial_waiter = 2000;
int ii;
char aktueller_letter;
int8_t pos_letter;
String pfeile = "^";
int8_t initial_ssid, initial_latlon, inital_TxSymbnol;
int8_t initial_ssid;
// set callsign - one for both reports
@ -729,7 +838,7 @@ void setup_data(void) {
while (pos_in_string < 6) {
key_pressed = false;
aktueller_letter = (char) Tcall.charAt(pos_in_string);// ist Buchstabe holen
for (pos_letter=0;pos_letter<36;pos_letter++) {
for (pos_letter=0;pos_letter<37;pos_letter++) {
if (aktueller_letter == werte_call[pos_letter]) {
break;
}
@ -750,7 +859,7 @@ void setup_data(void) {
}
// nächster Buchstabe
++pos_letter;
if (pos_letter>=36) {pos_letter=0;}
if (pos_letter>=37) {pos_letter=0;}
aktueller_letter=werte_call[pos_letter];
}
initial_waiter = 2000;

61
src/TTGO_T-Beam_LoRa_APRS_config.h
View File

@ -10,38 +10,37 @@
//
// licensed under CC BY-NC-SA
//
// version: 1.0b
// last update: 24.12.2018
// version: V1.1beta
// last update: 22.11.2019
//
// change history
// version V1.0
// added HW Version V1.0 support
// added presetting in the header TTGO...config.h to prevent long initial setup at first boot up
// added "SPACE" to allowed letters for callsign for shorter callsigns - has to be added at the end
// added smart beaconing
//
// version V1.0b
// first released version
// SET HW version
#define T_BEAM_V1_0 // use this for older Boards AKA Rev1 (second board release)
// #define T_BEAM_V0_7 // use this for older Boards AKA Rev0 (first board release)
// USER DATA - USE THESE LINES TO MODIFY YOUR PREFERENCES
// Your Callsign - now set during initial startup
String Tcall; //="OE3CJB-7"; //your Call Sign for normal position reports
String wxTcall; //="OE3CJB-7"; //your Call Sign for weather reports
// IF NOT CHANGED you have to go through the configuration routine at first boot up of the TTGO T-Beam
// Your symbol table and symbol for position reports incl. battery voltage
String sTable="/"; //Primer
//String sTable="\"; //Alternativ
#define CALLSIGN "OE1XYZ-0" // enter your callsign here - less then 6 letter callsigns please add "spaces" so total length is 6 (without SSID)
#define WX_CALLSIGN "OE1XYZ-0" // use same callsign but you can use different SSID
#define LONGITUDE_PRESET "01539.85E" // please in APRS notation DDMM.mmN or DDMM.mmS
#define LATIDUDE_PRESET "4813.62N" // please in APRS notation DDDMM.mmE or DDDMM.mmW
#define APRS_SYMBOL ">" // other symbols are
// "_" => Weather Station
// ">" => CAR
// "[" => RUNNER
// "b" => BICYCLE
// "<" => MOTORCYCLE
// String sSymbol="_"; //symbol code Weather Station
// String sSymbol=">"; //symbol code CAR
// String sSymbol="["; //symbol code RUNNER
// String sSymbol="b"; //symbol code BICYCLE
// String sSymbol="<"; //symbol code MOTORCYCLE
// Your symbol table and symbol for weather reports
String wxTable="/"; //Primer
String wxSymbol="_"; //Symbol Code Weather Station
// String wxSymbol="W"; //Symbol Code Weather Station/
//#define LATITUDE "4813.62N" // please in APRS notation DDMM.mmN or DDMM.mmS used for FIXED_POSITION
//#define LONGITUDE "01539.85E" // please in APRS notation DDDMM.mmE or DDDMM.mmW used for FIXED_POSITION
// ^^^^^LATITUDE and LONGITUDE only used when FIXED_POSITION is true
// Tracker setting: use these lines to modify the tracker behaviour
#define TXFREQ 433.775 // Transmit frequency in MHz
#define TXdbmW 18 // Transmit power in dBm
#define TXenablePA 0 // switch internal power amplifier on (1) or off (0)
// Transmit intervall
unsigned long nextTX = 60000L; // Send every 60 secs
// unsigned long nextTX = 5000L; // Send every 5 secs - FOR TESTS ONLY - NO CONNECTION TO SERVER PLEASE!!!!
// TRANSMIT INTERVAL
unsigned long max_time_to_nextTX = 60000L; // set here MAXIMUM time in ms(!) for smart beaconing - minimum time is always 1 min = 60 secs = 60000L !!!
// when entering 60000L intervall is fixed to 1 min