diff --git a/README.md b/README.md
index 5592459..6dac612 100644
--- a/README.md
+++ b/README.md
@@ -6,28 +6,28 @@ All user settings can be found in TTGO_T-Beam_LoRa_APRS.h
 <b>CHANGE CALLSIGN BEFORE UPLOADING FIRMWARE</b> to your T-Beam!!!
 
 You can define two different callsigns and symbols dependend on the transmitted packet.
-"Tcall" is the standard callsign used for traditional APRS packets as used for trackers
-"wxTcall" is the callsign used for APRS packets including a weather report (when DHT22 is used).
+<b>"Tcall" is the standard callsign used for traditional APRS packets as used for trackers
+<b>"wxTcall" is the callsign used for APRS packets including a weather report (when DHT22 is used).
 So you can change the SSID and make it easier to differentiate between normal and wahter packets.
 
-"sTable" should contain the value for the primary or secondary symbol table
-"sSymbol" conatins finally the symbol to be sent with the position report
+<b>"sTable"</b> should contain the value for the primary or secondary symbol table
+<b>"sSymbol"</b> contains finally the symbol to be sent with the position report
 
-"wxTable" should contain the value for the primary or secondary symbol table used for weather reports
-"wxSymbol" conatins finally the symbol to be sent with the weather report 
+<b>"wxTable"</b> should contain the value for the primary or secondary symbol table used for weather reports
+<b>"wxSymbol"</b> contains finally the symbol to be sent with the weather report 
 
-"nextTX" is the transmit intervall in ms (milli seconds) - don't use to short intervalls as it overloads the APRS servers
+<b>"nextTX"</b> is the transmit intervall in ms (milli seconds) - don't use to short intervalls as it overloads the APRS servers
 60000L is a could starting point and means a intervall of 60secs or 1 minute.
 
 Usage of the defines:
-#define SEND_WX false => no weather reports are sent
+<b>#define SEND_WX false</b> => no weather reports are sent
 #define SEND_WX true => weather reports are sent, but needs a connected DHT22 
 
-#define FIXED_POSITION false
+<b>#define FIXED_POSITION false</b>
 // set to true if you want to use fixed position (position defined below) instead, or to false if you want to use GPS data
 // also stops sending normal position reports when sending weather reports is active (SEND_WX true)
 
 the following lines are used to define the fixed position
-#define LATITUDE "4813.62N"  // please in APRS notation DDMM.mmN or DDMM.mmS used for FIXED_POSITION
-#define LONGITUDE "01539.85E"
+<b>#define LATITUDE "4813.62N"</b>  // please in APRS notation DDMM.mmN or DDMM.mmS used for FIXED_POSITION
+<b>#define LONGITUDE "01539.85E"</b>