Delete CHANGELOG

CHANGELOG

@@ -1,98 +0,0 @@
-1.7.0-dev
-    New features:
-    CMake build system replaces Makefile
-    Use libsndfile for reading and writing audio files
-    Initial DSTAR voice support
-
-1.6.0
-   New features:
-   Auto mutes P25 encrypted signals by default.
-   Raised cosine filters.
-
-   Fixed bugs:
-   Changed the crazy dibit buffer which filled for ever until it
-   ran out of allocated memory then caused a segmentation error. The
-   buffer is now allowed to fill to 90% before being returned to the
-   initial pointer value where it over writes the old samples, it
-   seems to work ok and no segmentation errors now.
-   Input level is now calculated differently, before when it reported 50%
-   the soundcard would be fully overloaded. With the new method aim for 30% inlvl.
-
-1.4.1
-	New features:
-    Several new sync types for existing formats now recognized:
-      Decodes voice from NXDN 4800 (6.25kHz) signals
-  	  Decodes voice from NXDN 9600 (12.5kHz) repeater output
-	  Decodes voice from DMR/MotoTRBO simplex/repeater input
-	  Decodes voice from X2-TDMA simplex/repeater input
-
-	Fixed bugs:
-	renamed "input:" to "inlvl:" to reduce confusion.  This value
-	indicates the audio input level, NOT the "decode success
-	rate".  Voice decode errors are indicated by the errorbars "=".
-
-1.4
-	New features:
-	Decodes voice from NXDN 9600 (12.5 kHz) simplex/repeater input
-	NXDN96 frames enabled by default
-	Improved resistance to NXDN96 sync false positives
-
-	Fixed bugs:
-	.wav file header updated after playing .imb/.amb data files
-	.imb/.amb files now have correct tgid in filename
-
-1.3.1	New features:
-        Support for ProVoice EA sync
-	CTRL-C is now caught so .wav files can be properly closed
-	DSD now shows mbelib version as well as it's own version
-	-R resume option now triggers on any TSDU so control channels can be left
-	in conventional scanlists.
-	Auto output gain now has 0.5 second hold time for faster error burst recovery
-	(was 1.5 seconds)
-        Audio output upsampling function simplified and improved
-
-	Fixed bugs:
-	DSD_Author.pgp now has correct public key (was copy of mbelib_Author key)
-	TGID and SRC are now cleared after TDULC or TDU.
-	Voice error counter is now reset in noCarrier()
-	TGID and SRC were not displaying for X2-TDMA frames
-	Fixed buffer issue in resumeScan()
-	Fixed error in .wav file headers preventing playback on some apps
-
-1.3	New features:
-        Decodes voice from ProVoice signals (requires -fp option)
-	algid and kid are now shown in hex notation
-
-	Fixed bugs:
-	auto output gain now has faster rise time
-	MoTDMA is now correctly labeled X2-TDMA
-
-1.2	New features:
-        Decodes voice for DMR standard (including MOTOTRBO)
-        Full metadata (src, talkgroup, lcinfo, mfid, lcformat, mi, algid, keyid) for X2-TDMA
-        TDMA slot identification for X2-TDMA/DMR/MOTOTRBO
-        Identifies non-voice frame types for X2-TDMA/DMR/MOTOTRBO
-        Frame only (no voice yet) support for 9600 baud NXDN
-	Auto leveling audio output gain (default) and -g option for fixed gain
-	GFSK modulation optimizations and improved C4FM/GFSK/QPSK auto detect
-
-	Fixed bugs:
-	nac was showing wrong ID
-	P25 metadata (lcinfo, mfid, lfcormat, mi, keyid, algid, lsd) are now
-	  printed out in the correct bit order (MSB -> LSB), was reversed.
-	fixed serveral bugs in dsd_upsample.c, with improved quality
-
-1.1	New features:
-	Scanner control options to allow scan resume during certain TDULC
-        Improved upsampling function audio quality
-        Greatly improved handling of X2-TDMA frames
-	Much faster QPSK decision point tracking by default
-
-	Fixed bugs:
-	playMbeFiles was not output to .wav file when -w was given
-    	Now correctly detects/handles Mot and P25 talkgroup formats
-	PDU frames were not detected
-
-1.0.3	Fixed buggy C4FM/QPSK auto detection and added -A option to adjust it.
-
-1.0 Initial release