More XPT Tweaks and Notes;

src/dmr_csbk.c

@@ -1087,16 +1087,12 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         sprintf (state->dmr_site_parms, "Free RPT - %d ", xpt_free);
 
         //assign to cc freq to follow during no sync
-        //current theory is that user should set channel 0 as the 'home repeater' frequency
-        //this can change if this is ever tested by anybody properly
         long int ccfreq = 0; 
 
         //if using rigctl we can set an unknown or updated cc frequency 
-        //by polling rigctl for the current frequency
+        if (opts->use_rigctl == 1 ) 
-        if (opts->use_rigctl == 1 ) //&& state->p25_cc_freq == 0 //&& opts->p25_is_tuned == 0
         {
           ccfreq = GetCurrentFreq (opts->rigctl_sockfd);
-          // if (ccfreq != 0) state->p25_cc_freq = ccfreq;
           if (ccfreq != 0)
           {
             state->p25_cc_freq = ccfreq;
@@ -1105,7 +1101,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         }
 
         //if using rtl input, we can ask for the current frequency tuned
-        if (opts->audio_in_type == 3 ) //&& state->p25_cc_freq == 0 //&& opts->p25_is_tuned == 0
+        if (opts->audio_in_type == 3 )
         {
           ccfreq = (long int)opts->rtlsdr_center_freq;
           if (ccfreq != 0)
@@ -1116,13 +1112,6 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
 
         }
 
-        // if (state->trunk_chan_map[0] != 0)
-        // {
-        //   state->p25_cc_freq = state->trunk_chan_map[0];
-        //   //set to always tuned
-        //   opts->p25_is_tuned = 1;
-        // }
-
         //Skip tuning calls if group calls are disabled
         if (opts->trunk_tune_group_calls == 0) goto SKIPXPT;
 
@@ -1191,6 +1180,11 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         //and if calls occur on the home repeater, it'll be too busy with those to go to the free repeater
         //DSD-FME doesn't have any sort of TG priority, so its first come first served, just block or allow
 
+        //Additional Notes: I've set XPT to set a CC frequency to whichever frequency its tuned to currently and getting
+        //this particular CSBK, if the status portion does work correctly, then it shouldn't matter which frequency it is on
+        //as long as this CSBK comes in and we can tune to other repeater lcns if they have activity and the frequency mapping
+        //is correct in the csv file, assuming the current frequency doesn't have voice activity
+
       } //end 0x0A
 
       //XPT Site Information - Adj Site Info??

src/dmr_flco.c

@@ -229,7 +229,7 @@ void dmr_flco (dsd_opts * opts, dsd_state * state, uint8_t lc_bits[], uint32_t C
       fprintf (stderr, "Hytera XPT ");
       if (reserved == 1) fprintf (stderr, "Group "); //according to observation
       else fprintf (stderr, "Private "); //according to observation
-      fprintf (stderr, "Call Protect ");
+      fprintf (stderr, "Call Alert "); //sounds more reasonable than 'protect'
 
       fprintf (stderr, "%s", KYEL);
       fprintf (stderr, "F-Rpt %d", xpt_free);

src/dsd_main.c

@@ -52,7 +52,7 @@ char * FM_banner[9] = {
   " ██║  ██║ ╚═══██╗██║  ██║    ██╔══╝  ██║╚██╔╝██║██╔══╝  ",
   " ██████╔╝██████╔╝██████╔╝    ██║     ██║ ╚═╝ ██║███████╗",
   " ╚═════╝ ╚═════╝ ╚═════╝     ╚═╝     ╚═╝     ╚═╝╚══════╝",
-  " 'Aero' Edition v2.0.0-62-g432495c  Windows 32-bit RC5  "
+  " 'Aero' Edition v2.0.0-64-gbd94f83  Windows 32-bit RC5  "
 };
 
 int comp (const void *a, const void *b)

src/dsd_ncurses.c

@@ -2061,7 +2061,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
   if (opts->ncurses_compact == 1)
   {
     printw ("------------------------------------------------------------------------------\n");
-    printw ("| Digital Speech Decoder: Florida Man Edition - Aero %s \n", "v2.0.0-62-g432495c RC5");
+    printw ("| Digital Speech Decoder: Florida Man Edition - Aero %s \n", "v2.0.0-64-gbd94f83 RC5");
   }
   if (opts->ncurses_compact == 0)
   {
@@ -2073,7 +2073,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
       if (i == 2) printw (" 'q' to Quit ");
       if (i == 4) printw (" MBElib %s", versionstr);
       if (i == 5) printw (" %s ", "Aero RC5"); //printw (" %s \n", GIT_TAG);
-      if (i == 6) printw (" %s \n", "v2.0.0-62-g432495c"); //printw (" %s \n", GIT_TAG);
+      if (i == 6) printw (" %s \n", "v2.0.0-64-gbd94f83"); //printw (" %s \n", GIT_TAG);
       else printw ("\n");
     }
     attroff(COLOR_PAIR(6)); //6