ua1zbe
/
emq-TE1
mirror of https://gitlab.com/hp3icc/emq-TE1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
emq-TE1/emq-TE1ws-Rev12e.sh

3032 lines
79 KiB
Bash
Raw Blame History

#!/bin/sh
echo Actualizando sistema
apt-get update -y
apt-get upgrade -y
apt-get dist-upgrade -y
############################################
echo instalando pre-requisitos
######################################################################################################
#!/bin/sh
apt-get install sudo -y
sudo apt-get purge needrestart -y
sudo apt-get install wget -y
sudo apt-get install git -y
sudo apt-get install screen -y
sudo apt-get install gcc -y
sudo apt-get install g++ -y
sudo apt-get install make -y
sudo apt-get install cmake -y
sudo apt-get install musl-dev -y
sudo apt-get install python2 -y
update-alternatives --install /usr/bin/python python /usr/bin/python3 1
sudo apt-get install libasound2-dev -y
sudo apt-get install libudev-dev -y
sudo apt-get install libusb-1.0-0-dev -y
sudo apt-get install libgps-dev -y
sudo apt-get install libx11-dev -y
sudo apt-get install libfftw3-dev -y
sudo apt-get install libpulse-dev -y
sudo apt-get install build-essential -y
sudo apt-get install alsa-utils -y
sudo apt-get install rsyslog -y
sudo apt-get install logrotate -y
sudo apt-get install gpsd -y
sudo apt-get install qt4-qmake -y
sudo apt-get install libtool -y
sudo apt-get install autoconf -y
sudo apt-get install automake -y
sudo apt-get install python-pkg-resources -y
sudo apt-get install sox -y
sudo apt-get install git-core -y
sudo apt-get install libi2c-dev -y
sudo apt-get install i2c-tools -y
sudo apt-get install lm-sensors -y
sudo apt-get install wiringpi -y
sudo apt-get install chkconfig -y
sudo apt-get install wavemon -y
sudo apt-get install libffi-dev -y
sudo apt-get install libssl-dev -y
sudo apt-get install cargo -y
sudo apt-get install sed -y
sudo apt install python3-pip -y
sudo apt install python3-distutils -y
sudo apt install python3-dev -y
sudo apt install python3-websockets
sudo apt install python3-psutil
sudo apt-get install python3-serial
sudo apt install python3-gpiozero -y
sudo apt-get install gpsd gpsd-clients python-gps -y
sudo apt install socket
sudo apt install threading
sudo apt install queue
sudo apt install sys
sudo apt install os
sudo apt install time
sudo apt install re
sudo apt install datetime
sudo apt install signal
sudo apt install datetime
sudo apt install bisect
sudo apt install struct
sudo apt install ansi2html
sudo apt install logrotate
sudo pip3 install ansi2html
sudo apt-get install python-pip -y
sudo apt-get install python-dev -y
sudo apt-get install rrdtool -y
##################
cd /home/
wget https://bootstrap.pypa.io/get-pip.py
sudo python3 get-pip.py
sudo cat > /home/requirements.txt <<- "EOF"
autobahn
jinja2==2.11.3
bitstring>=3.1.5
bitarray>=0.8.1
Twisted>=16.3.0
dmr_utils3>=0.1.19
configparser>=3.0.0
aprslib>=0.6.42
pynmea2
maidenhead
flask
folium
mysql-connector
resettabletimer>=0.7.0
setproctitle
EOF
#
pip3 install setuptools wheel
pip3 install -r requirements.txt
sudo rm requirements.txt
sudo rm get-pip.py
#
mkdir /var/www
mkdir /var/www/html
mkdir /var/log/ysf2dmr
mkdir /var/log/mmdvm
mkdir /var/log/mmdvmh
mkdir /var/log/FreeDMR
mkdir /var/log/hblink
mkdir /var/log/YSFReflector
sudo chmod +777 /var/log
sudo chmod +777 /var/log/*
cat > /etc/default/gpsd <<- "EOF"
USBAUTO="False"
DEVICES="/dev/ttyACM0"
START_DAEMON="true"
GPSD_OPTIONS="-n"
GPSD_SOCKET="/var/run/gpsd.sock"
EOF
###menu
sudo cat > /bin/menu <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "TE1ws-Rev14 / Raspbian Proyect HP3ICC Esteban Mackay 73." --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion:" 24 63 15 \
1 " APRS Direwolf Analogo" \
2 " APRS Direwolf RTL-SDR " \
3 " APRS Multimon-ng " \
4 " APRS Ionosphere " \
5 " MMDVMHost " \
6 " Dvswitch " \
7 " pYSFReflector " \
8 " YSF2DMR " \
9 " HBLink3 Server " \
10 " FreeDMR Server " \
11 " Editar WiFi " \
12 " DDNS NoIP " \
13 " GoTTY " \
14 " Reiniciar Equipo " \
15 " Salir del menu " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
menu-dw-analogo;;
2)
menu-dw-rtl;;
3)
menu-mm-rtl;;
4)
menu-ionos;;
5)
menu-mmdvm;;
6)
menu-dvs;;
7)
menu-ysf;;
8)
menu-ysf2dmr;;
9)
menu-hbl;;
10)
menu-fdmr;;
11)
menu-wifi;;
12)
menu-noip ;;
13)
menu-web ;;
14)
menu-reboot ;;
15)
break;
esac
done
exit 0
EOF
#
sudo gpsd /dev/ttyACM0 -F /var/run/gpsd.sock
#################
echo iniciando instalacion
cd /opt
git clone https://github.com/iu5jae/pYSFReflector.git
cd pYSFReflector/
#cp YSFReflector /usr/local/sbin/
#cp YSFReflector.ini /usr/local/etc/
cp YSFReflector /usr/local/bin/
chmod +x /usr/local/bin/YSFReflector
mkdir /etc/YSFReflector
cp YSFReflector.ini /etc/YSFReflector/
cd /etc/YSFReflector/
sudo sed -i 's/FilePath=\/var\/log/FilePath=\/var\/log\/YSFReflector/' YSFReflector.ini
sudo sed -i 's/42395/42000/' YSFReflector.ini
sudo sed -i 's/FileRotate=1/FileRotate=0/' YSFReflector.ini
cd /opt/pYSFReflector/
cp deny.db /usr/local/etc/
chmod +x /usr/local/bin/YSFReflector
#
sudo cat > /lib/systemd/system/YSFReflector.service <<- "EOF"
[Unit]
Description=YSFReflector
After=multi-user.target
[Service]
User=root
#ExecStartPre=/bin/sleep 30
ExecStart=/usr/bin/python3 /usr/local/bin/YSFReflector /etc/YSFReflector/YSFReflector.ini
[Install]
WantedBy=multi-user.target
EOF
###
sudo groupadd mmdvm
sudo useradd mmdvm -g mmdvm -s /sbin/nologin
sudo chown -R mmdvm:mmdvm /var/log/YSFReflector
###############################
mkdir /opt/YSF2DMR
cd /opt/
git clone https://github.com/juribeparada/MMDVM_CM.git
sudo cp -r /opt/MMDVM_CM/YSF2DMR /opt/
cd YSF2DMR
sudo make
sudo make install
sudo apt-get install zip gzip tar -y
cd /opt/
wget https://github.com/hp3icc/emq-TE1ws/raw/main/rtl-sdr-te1ws.zip
sudo unzip rtl-sdr-te1ws.zip
sudo rm rtl-sdr-te1ws.zip
cd rtl-sdr/
sudo mkdir build
cd build
cmake ../ -DINSTALL_UDEV_RULES=ON
sudo make
sudo make install
sudo ldconfig
sudo cp /opt/rtl-sdr/rtl-sdr.rules /etc/udev/rules.d
cd /opt/
git clone https://github.com/asdil12/kalibrate-rtl.git
cd kalibrate-rtl/
sudo chmod +x bootstrap
sudo chmod +x configure
./bootstrap
./configure
sudo make
sudo make install
##################################################################
#multimon-ng
cd /opt
git clone https://github.com/EliasOenal/multimon-ng.git
cd multimon-ng/
mkdir build
cd build
cmake ..
make
sudo make install
cd /opt
git clone https://github.com/asdil12/pymultimonaprs.git
cd pymultimonaprs
sudo python2 setup.py install
############################################################################################
#web
cd /opt/
git clone --recurse-submodules -j8 https://github.com/dg9vh/MMDVMHost-Websocketboard
sudo chown -R mmdvm:mmdvm /opt/MMDVMHost-Websocketboard
#
cat > /opt/MMDVMHost-Websocketboard/logtailer.ini <<- "EOF"
[DEFAULT]
# No need to touch this. If you want to bind it to a specific IP-address (if there are more than one interface to the
# network you can set your ip here - but default it listens on every interface
Host=0.0.0.0
# If changeing the port please change it also in the index.html-file at the parts where you find:
# new WebSocket("ws://" + window.location.hostname ...
Port=5679
# set to True if SSL will be used
Ssl=False
SslCert=/path/to/cert
SslKey=/path/to/keyfile
# This defines the maximum amount of loglines to be sent on initial opening of the dashboard
MaxLines=500
# Keep this parameter synchrone to Filerotate in MMDVM.ini/DMRHost.ini - if 0 then False, if 1 then True
Filerotate=False
#True
[MMDVMHost]
# Don't throw away the trailing slash! It is important but check logfile-location and Prefix twice :-)
Logdir=/var/log/mmdvmh/
# Change this to DMRHost, if you are using DMRHost and configured this as log-prefix in the host-ini.
Prefix=MMDVMH
# if you want to have the operator-names as popup with the callsigns, set this parts = 1 and the LookupFile to
# the right position. On MMDVMHost comment out the DMRIDs.dat-line to have the DMRIds and not the callsigns in the
# logfile to have the callsigns with names transported to the dashboard.
DMR_ID_Lookup=1
DMR_ID_LookupFile=/opt/MMDVMHost/DMRIds.dat
# Location of your MMDVM.ini/DMRHost.ini or similar
MMDVM_ini=/opt/MMDVMHost/MMDVM.ini
# Localtion of your MMDVMHost/DMRHost-binary
MMDVM_bin=/opt/MMDVMHost/MMDVMHost
#/usr/local/bin/MMDVMHost
[DAPNETGateway]
# Don't throw away the trailing slash! It is important but check logfile-location and Prefix twice :-)
Logdir=/var/log/mmdvmh
#/mnt/ramdisk/
Prefix=DAPNETGateway
[ServiceMonitoring]
# Here you list your Services to be monitored. Just add additional lines if needed but be sure to count them up
BinaryName1=MMDVMHost
BinaryName2=DMRGateway
BinaryName3=DGIdGateway
BinaryName4=YSF2DMR
EOF
#
cd /opt/MMDVMHost-Websocketboard/html/
sudo sed -i 's/5678/5679/' index.html
############################
cat > /lib/systemd/system/http.server-mmdvmh.service <<- "EOF"
[Unit]
Description=Python3 http.server.mmdvmhost
After=network.target
[Service]
User=root
Type=simple
#User=mmdvm
#Group=mmdvm
Restart=always
ExecStartPre=/bin/sleep 30
# Modify for different location of Python3 or other port
ExecStart=/usr/bin/python3 -m http.server 80 --directory /opt/MMDVMHost-Websocketboard/html
[Install]
WantedBy=multi-user.target
EOF
#
cat > /lib/systemd/system/logtailer-mmdvmh.service <<- "EOF"
[Unit]
Description=Python3 logtailer for MMDVMDash
After=network.target
[Service]
Type=simple
User=mmdvm
Group=mmdvm
Restart=always
ExecStartPre=/bin/sleep 30
# Modify for different location of Python3 or other port
WorkingDirectory=/opt/MMDVMHost-Websocketboard/
ExecStart=/usr/bin/python3 /opt/MMDVMHost-Websocketboard/logtailer.py
[Install]
WantedBy=multi-user.target
EOF
#
cd /opt/
git clone --recurse-submodules -j8 https://github.com/dg9vh/WSYSFDash
cd /opt/WSYSFDash/
sudo chown -R mmdvm /opt/WSYSFDash
#
cat > /opt/WSYSFDash/logtailer.ini <<- "EOF"
[DEFAULT]
# No need to change this line below
Host=0.0.0.0
Port=5678
# set to True if SSL will be used
Ssl=False
SslCert=/path/to/fullchain.pem
SslKey=/path/to/privkey.pem
# This defines the maximum amount of loglines to be sent on initial opening of the dashboard
MaxLines=500
# Keep this parameter synchrone to Filerotate in YSFReflector.ini - if 0 then False, if 1 then True
Filerotate=False
#True
# You can use the logtailer-Service for more than one reflector running on your system.
# To do this, just copy the [YSFReflectorN]-Section into a new one, renumber it and modify the Logdir and Prefix.
# To use this on systems with more than one reflector, it is recommended to use a real webserver to host the html-files.
[YSFReflector]
# Localtion of your YSFReflector-binary
YSFReflector_bin=/usr/local/bin/YSFReflector
Logdir=/var/log/YSFReflector/
Prefix=YSFReflector
#[YSFReflector2]
#Logdir=/var/log/YSFReflector2/
#Prefix=YSFReflector
EOF
#
cat > /lib/systemd/system/http.server-ysf.service <<- "EOF"
[Unit]
Description=Python3 http.server-ysf
After=network.target
[Service]
User=root
ExecStartPre=/bin/sleep 45
Type=simple
#User=mmdvm
#Group=mmdvm
Restart=always
# Modify for different location of Python3 or other port
ExecStart=/usr/bin/python3 -m http.server 80 --directory /opt/WSYSFDash/html
[Install]
WantedBy=multi-user.target
EOF
#
cat > /lib/systemd/system/logtailer-ysf.service <<- "EOF"
[Unit]
Description=Python3 logtailer for WSYSFDash
After=network.target
[Service]
ExecStartPre=/bin/sleep 10
Type=simple
User=mmdvm
Group=mmdvm
Restart=always
# Modify for different location of Python3 or location of files
WorkingDirectory=/opt/WSYSFDash/
ExecStart=/usr/bin/python3 /opt/WSYSFDash/logtailer.py
[Install]
WantedBy=multi-user.target
EOF
#
cd /opt/MMDVMHost-Websocketboard/html/data/
sudo rm TG_List.csv
wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/TG_List.csv
####################################
cd /boot
sudo sed -i 's/console=serial0,115200 //' cmdline.txt
sudo systemctl stop serial-getty@ttyAMA0.service
sudo systemctl stop bluetooth.service
sudo systemctl disable serial-getty@ttyAMA0.service
sudo systemctl disable bluetooth.service
sudo sed -i 's/#dtparam=i2c_arm=on/dtparam=i2c_arm=on/' config.txt
sudo sed -i 's/dtparam=audio=on/#dtparam=audio=on/' config.txt
echo "enable_uart=1" >> config.txt
echo "dtoverlay=pi3-disable-bt" >> config.txt
echo "dtparam=spi=on" >> config.txt
##################
cat > /lib/systemd/system/monp.service <<- "EOF"
[Unit]
Description=sudo modprobe i2c-dev
#Wants=network-online.target
#After=syslog.target network-online.target
[Service]
User=root
#ExecStartPre=/bin/sleep 1800
ExecStart=sudo modprobe i2c-dev
[Install]
WantedBy=multi-user.target
EOF
##########
cd /opt
git clone https://github.com/g4klx/MMDVMHost.git
cd MMDVMHost/
sudo make
sudo make install
git clone https://github.com/hallard/ArduiPi_OLED
cd ArduiPi_OLED
sudo make
cd /opt/MMDVMHost/
make clean
sudo make -f Makefile.Pi.OLED
groupadd mmdvm
useradd mmdvm -g mmdvm -s /sbin/nologin
chown mmdvm /var/log/
#############################################################################################################################################################
######
cat > /bin/menu-mm-rtl <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu Multimon-NG" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Editar Multimon-ng APRS " \
2 " Iniciar APRS " \
3 " Detener APRS " \
4 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /etc/pymultimonaprs.json;;
2)
sudo systemctl restart multimon-rtl.service && sudo systemctl enable multimon-rtl.service;;
3)
sudo systemctl stop multimon-rtl.service && sudo systemctl disable multimon-rtl.service;;
4)
break;
esac
done
exit 0
EOF
##################################################
sudo cat > /bin/menu-fdmr <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu FreeDMR" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion:" 21 50 12 \
1 " Editar FreeDMR Server " \
2 " Editar Interlink " \
3 " Editar HBMon2 " \
4 " Editar Puerto HTTP " \
5 " Parrot on " \
6 " Parrot off " \
7 " Iniciar FreeDMR Server " \
8 " Detener FreeDMR Server " \
9 " Dashboard HBMon2 on " \
10 " Dashboard HBMon2 off " \
11 " D-APRS Igate " \
12 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /opt/FreeDMR/config/FreeDMR.cfg ;;
2)
sudo nano /opt/FreeDMR/config/rules.py ;;
3)
sudo nano /opt/HBMonv2/config.py ;;
4)
sudo nano /lib/systemd/system/http.server-fmr.service && sudo systemctl daemon-reload ;;
5)
sudo systemctl stop fdmrparrot.service && sudo systemctl start fdmrparrot.service && sudo systemctl enable fdmrparrot.service ;;
6)
sudo systemctl stop fdmrparrot.service && sudo systemctl disable fdmrparrot.service ;;
7)
sudo systemctl stop proxy.service && sudo systemctl start proxy.service && sudo systemctl enable proxy.service && sudo systemctl stop freedmr.service && sudo systemctl start freedmr.service && sudo systemctl enable freedmr.service ;;
8)
sudo systemctl stop freedmr.service && sudo systemctl disable freedmr.service && sudo systemctl stop proxy.service && sudo systemctl disable proxy.service && rm /var/log/FreeDMR/* ;;
9)
sudo rm /opt/HBMonv2/sysinfo/*.rrd && sudo sh /opt/HBMonv2/sysinfo/rrd-db.sh && cronedit.sh '*/5 * * * *' 'sudo /opt/HBMonv2/sysinfo/graph.sh' add && cronedit.sh '*/2 * * * *' 'sudo /opt/HBMonv2/sysinfo/cpu.sh' add && cronedit.sh '* */24 * * *' 'sudo /opt/HBMonv2/updateTGIDS.sh >/dev/null 2>&1' add && sudo systemctl stop hbmon2.service && sudo rm /opt/HBMonv2/*.json && sudo systemctl enable hbmon2.service && sudo systemctl start http.server-fmr.service && sudo systemctl enable http.server-fmr.service && sudo sh /opt/HBMonv2/updateTGIDS.sh ;;
10)
sudo systemctl stop hbmon2.service && sudo systemctl disable hbmon2.service && sudo systemctl stop http.server-fmr.service && sudo systemctl disable http.server-fmr.service && cronedit.sh '*/5 * * * *' 'sudo /opt/HBMonv2/sysinfo/graph.sh' remove && cronedit.sh '*/2 * * * *' 'sudo /opt/HBMonv2/sysinfo/cpu.sh' remove && cronedit.sh '* */24 * * *' 'sudo /opt/HBMonv2/updateTGIDS.sh >/dev/null 2>&1' remove ;;
11)
menu-igate ;;
12)
break;
esac
done
exit 0
EOF
############################
sudo cat > /lib/systemd/system/http.server-fmr.service <<- "EOF"
[Unit]
Description=Python3 http.server.fdmr
After=network.target
[Service]
User=root
Type=simple
#User=mmdvm
#Group=mmdvm
Restart=always
#ExecStartPre=/bin/sleep 30
# Modify for different location of Python3 or other port
ExecStart=php -S 0.0.0.0:80 -t /opt/HBMonv2/html/
[Install]
WantedBy=multi-user.target
EOF
#########
sudo cat > /bin/menu-hbl <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu HBLink3" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion:" 21 50 12 \
1 " Editar HBLink Server " \
2 " Editar Interlink " \
3 " Editar HBMon " \
4 " Parrot on " \
5 " Parrot off " \
6 " Iniciar HBLink Server " \
7 " Detener HBLink Server " \
8 " Dashboard HBMon on " \
9 " Dashboard HBMon off " \
10 " D-APRS Igate " \
11 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /opt/HBlink3/hblink.cfg ;;
2)
sudo nano /opt/HBlink3/rules.py ;;
3)
sudo nano /opt/HBmonitor/config.py ;;
4)
sudo systemctl stop hbparrot.service && sudo systemctl start hbparrot.service && sudo systemctl enable hbparrot.service ;;
5)
sudo systemctl stop hbparrot.service && sudo systemctl disable hbparrot.service ;;
6)
sudo systemctl stop hblink.service && sudo systemctl start hblink.service && sudo systemctl enable hblink.service ;;
7)
sudo systemctl stop hblink.service && sudo systemctl disable hblink.service && rm /var/log/hblink/* ;;
8)
sudo systemctl stop hbmon.service && sudo systemctl start hbmon.service && sudo systemctl enable hbmon.service ;;
9)
sudo systemctl stop hbmon.service && sudo systemctl disable hbmon.service && sudo rm /opt/HBmonitor/*.json ;;
10)
menu-igate2 ;;
11)
break;
esac
done
exit 0
EOF
######menu-wifi
cat > /bin/menu-wifi <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu WiFi" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Editar redes WiFi " \
2 " Reiniciar dispositivo WiFi " \
3 " Buscar redes wifi cercanas " \
4 " Ver intensidad de WIFI " \
5 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf ;;
2)
sudo ifconfig wlan0 down && sudo ifconfig wlan0 up ;;
3)
sudo iwlist wlan0 scan | grep ESSID | grep -o '"[^"]\+"' >> /tmp/ssid.txt && nano /tmp/ssid.txt && sudo rm /tmp/ssid.txt ;;
4)
sudo wavemon ;;
5)
break;
esac
done
exit 0
EOF
#
cat > /bin/menu-web <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Web-Menu" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Habilitar Web-Menu " \
2 " Deshabilitar Web-Menu " \
3 " Editar Web-Menu " \
4 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo systemctl stop gotty.service && sudo systemctl start gotty.service && sudo systemctl enable gotty.service;;
2)
sudo systemctl stop gotty.service && systemctl disable gotty.service ;;
3)
sudo nano /lib/systemd/system/gotty.service && sudo systemctl daemon-reload ;;
4)
break;
esac
done
exit 0
EOF
####menu-mmdvm
cat > /bin/menu-mmdvm <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu MMDVMHost" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 22 50 13 \
1 " Editar MMDVMHost " \
2 " Iniciar MMDVMHost " \
3 " Detener MMDVMHost " \
4 " Dashboard ON " \
5 " Dashboard Off " \
6 " Editar Puerto http " \
7 " Editar HTML " \
8 " Dashboard Rooms: BM, europelink " \
9 " Dashboard Rooms: BM, worldlink " \
10 " Dashboard Rooms: FreeDMR, europelink " \
11 " Dashboard Rooms: FreeDMR, worldlink " \
12 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /opt/MMDVMHost/MMDVM.ini;;
2)
sudo sh /opt/MMDVMHost/DMRIDUpdate.sh && sudo systemctl enable dmrid-mmdvm.service ;;
3)
sudo systemctl stop mmdvmh.service && sudo systemctl stop dmrid-mmdvm.service && sudo systemctl disable dmrid-mmdvm.service && sudo rm /var/log/mmdvmh/MMDVMH.* ;;
4)
sudo systemctl restart logtailer-mmdvmh.service && sudo systemctl enable logtailer-mmdvmh.service && sudo systemctl restart http.server-mmdvmh.service && sudo systemctl enable http.server-mmdvmh.service ;;
5)
sudo systemctl stop logtailer-mmdvmh.service && sudo systemctl disable logtailer-mmdvmh.service && sudo systemctl stop http.server-mmdvmh.service && sudo systemctl disable http.server-mmdvmh.service ;;
6)
sudo nano /lib/systemd/system/http.server-mmdvmh.service && sudo systemctl daemon-reload ;;
7)
sudo nano /opt/MMDVMHost-Websocketboard/html/index.html ;;
8)
cd /opt/MMDVMHost-Websocketboard/html/data/ && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/TG_List.csv && sudo rm *.csv* && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/TG_List.csv ;;
9)
cd /opt/MMDVMHost-Websocketboard/html/data/ && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/TG_List-WL.csv && sudo rm *.csv* && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/TG_List-WL.csv && sudo mv TG_List-WL.csv TG_List.csv;;
10)
cd /opt/MMDVMHost-Websocketboard/html/data/ && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/FDMR-EURO.csv && sudo rm *.csv* && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/FDMR-EURO.csv && sudo mv FDMR-EURO.csv TG_List.csv;;
11)
cd /opt/MMDVMHost-Websocketboard/html/data/ && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/FDMR-WORLD.csv && sudo rm *.csv* && wget https://raw.githubusercontent.com/hp3icc/emq-TE1ws/main/FDMR-WORLD.csv && sudo mv FDMR-WORLD.csv TG_List.csv;;
12)
break;
esac
done
exit 0
EOF
########menu-ysf
cat > /bin/menu-ysf <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu YSFReflector" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Editar pYSFReflector Server " \
2 " Iniciar Reflector " \
3 " Detener Reflector " \
4 " Dashboard on " \
5 " Dashboard off " \
6 " Editar Puerto http " \
7 " Editar HTML " \
8 " Editar Dashboard " \
9 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /etc/YSFReflector/YSFReflector.ini ;;
2)
sudo systemctl stop YSFReflector.service && sudo systemctl start YSFReflector.service && sudo systemctl enable YSFReflector.service ;;
3)
sudo systemctl stop YSFReflector.service && sudo systemctl disable YSFReflector.service && rm /var/log/YSFReflector/* ;;
4)
sudo systemctl restart logtailer-ysf.service && sudo systemctl enable logtailer-ysf.service && sudo systemctl restart http.server-ysf.service && sudo systemctl enable http.server-ysf.service ;;
5)
sudo systemctl stop logtailer-ysf.service && sudo systemctl disable logtailer-ysf.service && sudo systemctl stop http.server-ysf.service && sudo systemctl disable http.server-ysf.service ;;
6)
sudo nano /lib/systemd/system/http.server-ysf.service && sudo systemctl daemon-reload ;;
7)
sudo nano /opt/WSYSFDash/html/index.html ;;
8)
nano /opt/WSYSFDash/html/js/config.js ;;
9)
break;
esac
done
exit 0
EOF
##########menu-dvs
cat > /bin/menu-dvs <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu DVSwitch" --menu "Nota : Debe encender Dvswitch antes de editar para utilizar." 20 60 11 \
1 " Dvswitch ON " \
2 " Dvswitch OFF " \
3 " Editar Dvswitch Server " \
4 " Editar Puerto http " \
5 " Dashboard on " \
6 " Dashboard off " \
7 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo systemctl restart analog_bridge.service && sudo systemctl restart mmdvm_bridge.service && sudo systemctl restart nxdngateway.service && sudo systemctl restart p25gateway.service && sudo systemctl restart ysfgateway.service && sudo systemctl enable analog_bridge.service && sudo systemctl enable mmdvm_bridge.service && sudo systemctl enable nxdngateway.service && sudo systemctl enable p25gateway.service && sudo systemctl enable ysfgateway.service ;;
2)
sudo systemctl stop analog_bridge.service && sudo systemctl stop mmdvm_bridge.service && sudo systemctl stop nxdngateway.service && sudo systemctl stop p25gateway.service && sudo systemctl stop ysfgateway.service && sudo systemctl disable analog_bridge.service && sudo systemctl disable mmdvm_bridge.service && sudo systemctl disable nxdngateway.service && sudo systemctl disable p25gateway.service && sudo systemctl disable ysfgateway.service && rm /var/log/mmdvm/*;;
3)
sudo /usr/local/dvs/dvs ;;
4)
nano /lib/systemd/system/http.server-dvs.service && sudo systemctl daemon-reload ;;
5)
sudo systemctl restart http.server-dvs.service && sudo systemctl enable http.server-dvs.service ;;
6)
sudo systemctl stop http.server-dvs.service && sudo systemctl disable http.server-dvs.service ;;
7)
break;
esac
done
exit 0
EOF
#
cat > /bin/menu-reboot <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Esteban Mackay 73." --menu "Nota: Reinicio automatico, monitorea cada minuto el internet." 15 50 4 \
1 " Iniciar reinicio de equipo" \
2 " Habilitar reinicio automatico" \
3 " Deshabilitar reinicio automatico" \
4 " Retornar menu principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo reboot
;;
2)
cronedit.sh '*/1 * * * *' 'sudo /usr/local/bin/rebooter1.sh' add ;;
3)
cronedit.sh '*/1 * * * *' 'sudo /usr/local/bin/rebooter1.sh' remove ;;
4) break;
esac
done
exit 0
EOF
#
sudo cat > /usr/local/bin/rebooter1.sh <<- "EOF"
#!/bin/bash
SERVER=8.8.8.8
ping -c2 ${SERVER} > /dev/null
if [ $? != 0 ]
then
#
sudo reboot
fi
EOF
#
cat > /lib/systemd/system/http.server-dvs.service <<- "EOF"
[Unit]
Description=PHP http.server.DVS
After=network.target
[Service]
User=root
Type=simple
#User=mmdvm
#Group=mmdvm
Restart=always
#ExecStartPre=/bin/sleep 30
# Modify for different other port
ExecStart=php -S 0.0.0.0:80 -t /var/www/dvs/
[Install]
WantedBy=multi-user.target
EOF
#####menu-dw-analogo
cat > /bin/menu-dw-analogo <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu Direwolf" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 55 11 \
1 " Editar Direwolf Analogo " \
2 " Iniciar APRS " \
3 " Detener APRS " \
4 " Compatibilidad Raspberry Zero" \
5 " Compatibilidad Raspberry B" \
6 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /opt/direwolf/dw.conf;;
2)
sudo systemctl restart direwolf.service && sudo systemctl enable direwolf.service;;
3)
sudo systemctl stop direwolf.service && sudo systemctl disable direwolf.service;;
4)
sudo rm /usr/local/bin/direwolf && sudo cp /opt/direwolf/direwolf1 /usr/local/bin/direwolf && sudo chmod +x /usr/local/bin/direwolf;;
5)
sudo rm /usr/local/bin/direwolf && sudo cp /opt/direwolf/direwolf2 /usr/local/bin/direwolf && sudo chmod +x /usr/local/bin/direwolf;;
6)
break;
esac
done
exit 0
EOF
######menu-dw-rtl
cat > /bin/menu-dw-rtl <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu Direwolf SDR" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Editar Direwolf SDR " \
2 " Editar RTL-SDR " \
3 " Iniciar APRS RX-IGate " \
4 " Detener APRS RX-IGate " \
5 " Compatibilidad Raspberry Zero " \
6 " Compatibilidad Raspberry Standard " \
7 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /opt/direwolf/sdr.conf ;;
2)
sudo nano /opt/direwolf/rtl.sh ;;
3)
sudo systemctl restart direwolf-rtl.service && sudo systemctl enable direwolf-rtl.service;;
4)
sudo systemctl stop direwolf-rtl.service && sudo systemctl disable direwolf-rtl.service;;
5)
sudo rm /usr/local/bin/direwolf && sudo cp /opt/direwolf/direwolf1 /usr/local/bin/direwolf && sudo chmod +x /usr/local/bin/direwolf;;
6)
sudo rm /usr/local/bin/direwolf && sudo cp /opt/direwolf/direwolf2 /usr/local/bin/direwolf && sudo chmod +x /usr/local/bin/direwolf;;
7)
break;
esac
done
exit 0
EOF
#####
######menu-ysf2dmr
cat > /bin/menu-ysf2dmr <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu YSF2DMR" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Editar YSF2DMR " \
2 " Iniciar YSF2DMR " \
3 " Detener YSF2DMR " \
4 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /opt/YSF2DMR/YSF2DMR.ini;;
2)
sudo sh /opt/YSF2DMR/DMRIDUpdate.sh && sudo systemctl enable dmrid-ysf2dmr.service && cronedit.sh '0 3 * * *' 'sudo sh /opt/YSF2DMR/DMRIDUpdate.sh' add ;;
3)
sudo systemctl stop ysf2dmr.service && sudo systemctl stop dmrid-ysf2dmr.service && sudo systemctl disable dmrid-ysf2dmr.service && rm /var/log/ysf2dmr/* && cronedit.sh '0 3 * * *' 'sudo sh /opt/YSF2DMR/DMRIDUpdate.sh' remove ;;
4)
break;
esac
done
exit 0
EOF
########ionosphere
mkdir /opt/ionsphere
cd /opt/ionsphere
wget https://github.com/cceremuga/ionosphere/releases/download/v1.0.0-beta1/ionosphere-raspberry-pi.tar.gz
tar vzxf ionosphere-raspberry-pi.tar.gz
cd /opt/ionsphere/ionosphere-raspberry-pi
cat > /opt/ionsphere/ionosphere-raspberry-pi/ionos.sh <<- "EOF"
#!/bin/sh
PATH=/bin:/usr/bin:/usr/local/bin
unset LANG
/opt/ionsphere/ionosphere-raspberry-pi/ionosphere
EOF
chmod +x /opt/ionsphere/ionosphere-raspberry-pi/ionosphere
chmod +x /opt/ionsphere/ionosphere-raspberry-pi/ionos.sh
chmod +777 /opt/ionsphere/ionosphere-raspberry-pi/ionos.sh
###nano /opt/ionsphere/ionosphere-raspberry-pi/config/config.yml
#####menu-ionos
cat > /bin/menu-ionos <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu IonosPhere" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Editar Ionosphere APRS " \
2 " Iniciar APRS " \
3 " Detener APRS " \
4 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo nano /opt/ionsphere/ionosphere-raspberry-pi/config/config.yml ;;
2)
systemctl enable ionos.service && sudo systemctl restart ionos.service ;;
3)
sudo systemctl stop ionos.service && sudo systemctl disable ionos.service ;;
4)
break;
esac
done
exit 0
EOF
################################
cat > /lib/systemd/system/ionos.service <<- "EOF"
[Unit]
Description=Ionphere-RTL Service
Wants=network-online.target
After=syslog.target network-online.target
[Service]
User=root
Type=simple
Restart=always
RestartSec=3
StandardOutput=null
WorkingDirectory=/opt/ionsphere/ionosphere-raspberry-pi
#ExecStartPre=/bin/sleep 30
ExecStart=sh /opt/ionsphere/ionosphere-raspberry-pi/ionos.sh
ExecReload=/bin/kill -HUP $MAINPID
KillMode=process
[Install]
# To make the network-online.target available
# systemctl enable systemd-networkd-wait-online.service
WantedBy=network-online.target
EOF
##########################################
###################
cat > /lib/systemd/system/dmrid-mmdvm.service <<- "EOF"
[Unit]
Description=DMRIDupdate MMDVMHost
Wants=network-online.target
After=syslog.target network-online.target
[Service]
User=root
#ExecStartPre=/bin/sleep 1800
ExecStart=/opt/MMDVMHost/DMRIDUpdate.sh
[Install]
WantedBy=multi-user.target
EOF
###################
cat > /lib/systemd/system/mmdvmh.service <<- "EOF"
[Unit]
Description=MMDVM Host Service
After=syslog.target network.target
[Service]
User=root
WorkingDirectory=/opt/MMDVMHost
#ExecStartPre=/bin/sleep 10
ExecStart=/opt/MMDVMHost/MMDVMHost /opt/MMDVMHost/MMDVM.ini
ExecStop=/usr/bin/screen -S MMDVMHost -X quit
[Install]
WantedBy=multi-user.target
EOF
################
cat > /lib/systemd/system/direwolf.service <<- "EOF"
[Unit]
Description=DireWolf is a software "soundcard" modem/TNC and APRS decoder
Documentation=man:direwolf
AssertPathExists=/opt/direwolf/dw.conf
[Unit]
Description=Direwolf Service
#Wants=network-online.target
After=sound.target syslog.target
#network-online.target
[Service]
User=root
ExecStart=sudo direwolf -c /opt/direwolf/dw.conf
#ExecStart=/usr/bin/direwolf -t 0 -c /opt/direwolf/dw.conf
StandardOutput=syslog
StandardError=syslog
SyslogIdentifier=direwolf
[Install]
WantedBy=multi-user.target
EOF
#####
cat > /lib/systemd/system/dmrid-ysf2dmr.service <<- "EOF"
[Unit]
Description=DMRIDupdate YSF2DMR
Wants=network-online.target
After=syslog.target network-online.target
[Service]
User=root
ExecStartPre=/bin/sleep 60
ExecStart=/opt/YSF2DMR/DMRIDUpdate.sh
[Install]
WantedBy=multi-user.target
EOF
#########
cat > /lib/systemd/system/direwolf-rtl.service <<- "EOF"
[Unit]
Description=Direwolf-RTL Service
Wants=network-online.target
After=syslog.target network-online.target
[Service]
User=root
#ExecStartPre=/bin/sleep 1800
ExecStart=/opt/direwolf/rtl.sh
# | direwolf -c /home/pi/direwolf/sdr.conf
[Install]
WantedBy=multi-user.target
#ExecStart= /usr/local/bin/rtl_fm -M fm -f 144.39M -p 0 -s 22050 -g 42 - | /usr/local/bin/direwolf -c /opt/direwolf/sdr.conf -r 22050 -D 1 -B 1200 -
EOF
#############
cat > /lib/systemd/system/multimon-rtl.service <<- "EOF"
[Unit]
Description=Direwolf-RTL Service
Wants=network-online.target
After=syslog.target network-online.target
[Service]
User=root
#ExecStartPre=/bin/sleep 1800
ExecStart=sudo pymultimonaprs
[Install]
WantedBy=multi-user.target
EOF
#####################
cat > /lib/systemd/system/ysf2dmr.service <<- "EOF"
[Unit]
Description=YSF2DMR Service
After=syslog.target network.target
[Service]
WorkingDirectory=/opt/YSF2DMR
ExecStartPre=/bin/sleep 30
ExecStart=/opt/YSF2DMR/YSF2DMR /opt/YSF2DMR/YSF2DMR.ini
[Install]
WantedBy=multi-user.target
EOF
###########################
cat > /opt/MMDVMHost/MMDVM.ini <<- "EOF"
[General]
# Coloque su indicativo
Callsign=HP3ICC
# Coloque su DMRID de 7 digitos mas 2 digitos para su conexion
Id=000000000
Timeout=300
Duplex=0
ModeHang=10
#RFModeHang=10
#NetModeHang=3
Display=None
#Display=OLED
#Display=Nextion
Daemon=0
[Info]
# Colocar frecuencia 9 digitos sin puntos
RXFrequency=433400000
TXFrequency=433400000
Power=1
# The following lines are only needed if a direct connection to a DMR master is being used
Latitude=0.0
Longitude=0.0
Height=0
Location=Panama
Description=emq-TE1ws-MMDVM
URL=https://github.com/hp3icc/emq-TE1ws
[Log]
# Logging levels, 0=No logging
DisplayLevel=1
FileLevel=1
FilePath=/var/log/mmdvmh
FileRoot=MMDVMH
FileRotate=0
[CW Id]
Enable=0
Time=10
# Callsign=
[DMR Id Lookup]
File=/opt/MMDVMHost/DMRIds.dat
Time=24
[NXDN Id Lookup]
File=NXDN.csv
Time=24
[Modem]
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=uart
# The port and speed used for a UART connection
# UARTPort=\\.\COM4
# UARTPort=/dev/ttyACM0
UARTPort=/dev/ttyAMA0
UARTSpeed=115200
#460800
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=0
TXOffset=0
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=50
# CWIdTXLevel=50
# D-StarTXLevel=50
DMRTXLevel=50
YSFTXLevel=50
# P25TXLevel=50
# NXDNTXLevel=50
# M17TXLevel=50
# POCSAGTXLevel=50
# FMTXLevel=50
# AX25TXLevel=50
RSSIMappingFile=RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0
[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
# SendFrameType=0
[D-Star]
Enable=0
Module=C
SelfOnly=0
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
# ModeHang=10
WhiteList=
[DMR]
Enable=1
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=1
DumpTAData=0
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4
# ModeHang=10
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
# OVCM=0
[System Fusion]
Enable=1
LowDeviation=0
SelfOnly=0
TXHang=4
RemoteGateway=1
# ModeHang=10
[P25]
Enable=0
NAC=293
SelfOnly=0
OverrideUIDCheck=0
RemoteGateway=0
TXHang=5
# ModeHang=10
[NXDN]
Enable=0
RAN=1
SelfOnly=0
RemoteGateway=0
TXHang=5
# ModeHang=10
[M17]
Enable=0
CAN=0
SelfOnly=0
TXHang=5
# ModeHang=10
[POCSAG]
Enable=0
Frequency=439987500
[FM]
Enable=0
# Callsign=G4KLX
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
# 0 - Carrier access with COS
# 1 - CTCSS only access without COS
# 2 - CTCSS only access with COS
# 3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=1
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=30
# SquelchHighThreshold=30
# SquelchLowThreshold=20
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
# ModeHang=10
[AX.25]
Enable=0
TXDelay=300
RXTwist=6
SlotTime=30
PPersist=128
Trace=1
[D-Star Network]
Enable=0
#LocalAddress=127.0.0.1
#LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
# ModeHang=3
Debug=0
[DMR Network]
Enable=1
# Type may be either 'Direct' or 'Gateway'. When Direct you must provide the Master's
# address as well as the Password, and for DMR+, Options also.
Type=Direct
#LocalAddress=127.0.0.1
#LocalPort=62032
#RemoteAddress=3021.master.brandmeister.network
RemoteAddress=freedmr-hp.ddns.net
RemotePort=62031
Password=passw0rd
Jitter=500
Slot1=1
Slot2=1
# No active linea de Option para TG estaticos, si utiliza BM
#Options=TS2=7144,7000;DIAL=0;VOICE=0;TIMER=1;
# ModeHang=3
Debug=0
[System Fusion Network]
Enable=1
#LocalAddress=127.0.0.1
#LocalPort=3200
GatewayAddress=europelink.pa7lim.nl
GatewayPort=42000
# ModeHang=3
Debug=0
[P25 Network]
Enable=0
#LocalAddress=127.0.0.1
#LocalPort=32010
GatewayAddress=127.0.0.1
GatewayPort=42020
# ModeHang=3
Debug=0
[NXDN Network]
Enable=0
Protocol=Icom
#LocalAddress=127.0.0.1
#LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
# ModeHang=3
Debug=0
[M17 Network]
Enable=0
#LocalAddress=127.0.0.1
#LocalPort=17011
GatewayAddress=127.0.0.1
GatewayPort=17010
# ModeHang=3
Debug=0
[POCSAG Network]
Enable=0
#LocalAddress=127.0.0.1
#LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
# ModeHang=3
Debug=0
[FM Network]
Enable=0
# Protocol=USRP
#LocalAddress=127.0.0.1
#LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0
# ModeHang=3
Debug=0
[AX.25 Network]
Enable=0
Port=/dev/ttyp7
Speed=9600
Debug=0
[TFT Serial]
# Port=modem
Port=/dev/ttyAMA0
Brightness=50
[HD44780]
Rows=2
Columns=16
# For basic HD44780 displays (4-bit connection)
# rs, strb, d0, d1, d2, d3
Pins=11,10,0,1,2,3
# Device address for I2C
I2CAddress=0x20
# PWM backlight
PWM=0
PWMPin=21
PWMBright=100
PWMDim=16
DisplayClock=1
UTC=0
[Nextion]
Port=modem
#Port=/dev/ttyAMA0
Brightness=50
DisplayClock=1
UTC=0
#Screen Layout: 0=G4KLX 2=ON7LDS
ScreenLayout=2
IdleBrightness=20
[OLED]
Type=3
Brightness=1
Invert=0
Scroll=0
Rotate=1
Cast=0
LogoScreensaver=0
[LCDproc]
Address=localhost
Port=13666
#LocalPort=13667
DimOnIdle=0
DisplayClock=1
UTC=0
[Lock File]
Enable=0
File=/tmp/MMDVM_Active.lck
[Remote Control]
Enable=0
Address=127.0.0.1
Port=7642
EOF
########
cat > /opt/YSF2DMR/YSF2DMR.ini <<- "EOF"
[Info]
RXFrequency=438800000
TXFrequency=438800000
Power=1
Latitude=0.0
Longitude=0.0
Height=0
Location=Panama
Description=Multi-Mode
URL=www.google.co.uk
[YSF Network]
Callsign=HP3ICC
Suffix=ND
#Suffix=RPT
DstAddress=127.0.0.1
DstPort=42000
LocalAddress=127.0.0.1
#LocalPort=42013
EnableWiresX=0
RemoteGateway=0
HangTime=1000
WiresXMakeUpper=0
# RadioID=*****
# FICHCallsign=2
# FICHCallMode=0
# FICHBlockTotal=0
# FICHFrameTotal=6
# FICHMessageRoute=0
# FICHVOIP=0
# FICHDataType=2
# FICHSQLType=0
# FICHSQLCode=0
DT1=1,34,97,95,43,3,17,0,0,0
DT2=0,0,0,0,108,32,28,32,3,8
Daemon=0
[DMR Network]
Id=714000000
#XLXFile=XLXHosts.txt
#XLXReflector=950
#XLXModule=D
StartupDstId=714
# For TG call: StartupPC=0
StartupPC=0
Address=3021.master.brandmeister.network
Port=62031
Jitter=500
EnableUnlink=0
TGUnlink=4000
PCUnlink=0
# Local=62032
Password=****************
# Options=
TGListFile=TGList-DMR.txt
Debug=0
[DMR Id Lookup]
File=/opt/YSF2DMR/DMRIds.dat
Time=24
DropUnknown=0
[Log]
# Logging levels, 0=No logging
DisplayLevel=1
FileLevel=1
FilePath=/var/log/ysf2dmr/
FileRoot=YSF2DMR
[aprs.fi]
Enable=0
AprsCallsign=HP3ICC
Server=noam.aprs2.net
#Server=euro.aprs2.net
Port=14580
Password=12345
APIKey=APIKey
Refresh=240
Description=APRS Description
EOF
###################
cat > /etc/pymultimonaprs.json <<- "EOF"
{
"callsign": "HP3ICC-10",
"passcode": "12345",
"gateway": ["igates.aprs.fi:14580","noam.aprs2.net:14580"],
"preferred_protocol": "any",
"append_callsign": true,
"source": "rtl",
"rtl": {
"freq": 144.390,
"ppm": 0,
"gain": 24,
"offset_tuning": false,
"device_index": 0
},
"alsa": {
"device": "default"
},
"beacon": {
"lat": 8.5212,
"lng": -80.3598,
"table": "/",
"symbol": "r",
"comment": "APRS RX-IGATE / Raspbian Proyect by hp3icc",
"status": {
"text": "",
"file": false
},
"weather": false,
"send_every": 300,
"ambiguity": 0
}
}
EOF
#######
cat > /opt/ionsphere/ionosphere-raspberry-pi/config/config.yml <<- "EOF"
rtl:
path: "rtl_fm"
frequency: "144.390M"
gain: "49.6"
ppm-error: "0"
squelch-level: "0"
sample-rate: "22050"
additional-flags: ""
multimon:
path: "multimon-ng"
additional-flags: ""
beacon:
enabled: false
call-sign: ""
interval: 30m
comment: ""
handlers:
- id: "4967ade5-7a97-416f-86bf-6e2ae8a5e581"
name: "stdout"
- id: "b67ac5d5-3612-4618-88a9-a63d36a1777c"
name: "aprsis"
options:
enabled: true
server: "igates.aprs.fi:14580"
call-sign: "HP3ICC-10"
passcode: "12345"
filter: ""
EOF
###############################################
sudo mkdir /opt/noip
cd /opt/noip/
wget https://www.noip.com/client/linux/noip-duc-linux.tar.gz
tar vzxf noip-duc-linux.tar.gz
cd noip-2.1.9-1
sudo make
cat > /bin/menu-noip <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Menu NoIP" --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion" 20 50 11 \
1 " Activar NoIP " \
2 " Desactivar NoIP " \
3 " Info DDNS " \
4 " IP Publica " \
5 " Menu Principal " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
cd /opt/noip/ && sudo tar vzxf noip-duc-linux.tar.gz && cd /opt/noip/noip-2.1.9-1/ && sudo make && sudo make install && cronedit.sh '@reboot' 'sudo /usr/local/bin/noip2' add && /usr/local/bin/noip2 ;;
2)
cronedit.sh '@reboot' 'sudo /usr/local/bin/noip2' remove && sudo rm -r /usr/local/bin/noip2 && sudo rm -r /usr/local/etc/no-ip2.conf && sudo rm -r /tmp/no-ip2.conf && sudo rm -r /opt/noip/noip-2.1.9-1 ;;
3)
cd /tmp && sudo noip2 -S &> noip.txt && nano noip.txt && sudo rm noip.txt;;
4)
wget -qO- ifconfig.co/ip >> /tmp/ipgw.txt && nano /tmp/ipgw.txt && sudo rm /tmp/ipgw.txt ;;
5)
break;
esac
done
exit 0
EOF
##############################
#dvswitch
cd /opt
wget http://dvswitch.org/buster
chmod +x buster
./buster
apt-get update -y
apt-get install dvswitch-server -y
sudo sed -i "s/42000/42500/g" /opt/YSFGateway/YSFGateway.ini
sudo sed -i "s/42001/43001/g" /opt/YSFGateway/YSFGateway.ini
sudo sed -i "s/RptPort=3200/RptPort=3230/g" /opt/YSFGateway/YSFGateway.ini
sudo sed -i "s/LocalPort=4200/LocalPort=4230/g" /opt/YSFGateway/YSFGateway.ini
mkdir /var/www/dvs
sudo mv /var/www/html/* /var/www/dvs/
sudo sed -i 's/www\/html/www\/dvs/g' /usr/local/sbin/update-config.sh
sudo sed -i 's/www\/html/www\/dvs/g' /var/lib/dpkg/info/dvswitch*
####
cat > /opt/MMDVM_Bridge/MMDVM_Bridge.ini <<- "EOF"
[General]
Callsign=N0CALL
Id=1234567
Timeout=300
Duplex=0
[Info]
RXFrequency=147000000
TXFrequency=147000000
Power=1
Latitude=8.5211
Longitude=-80.3598
Height=0
Location=Raspbian Proyect HP3ICC
Description=MMDVM DVSwitch
URL=https://groups.io/g/DVSwitch
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24
[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0
[D-Star]
Enable=0
Module=B
[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
[System Fusion]
Enable=0
[P25]
Enable=0
NAC=293
[NXDN]
Enable=0
RAN=1
Id=12345
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
[DMR Network]
Enable=0
Address=hblink.dvswitch.org
Port=62031
Jitter=500
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=TS2=7144,7000;DIAL=0;VOICE=0;TIMER=10;
Slot1=0
Slot2=1
Debug=0
[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3230
GatewayAddress=127.0.0.1
GatewayPort=4230
Debug=0
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
EOF
####
cd /opt/
git clone https://github.com/lz5pn/HBlink3
sudo mv /opt/HBlink3/ /opt/backup/
cd /opt/backup/
git clone https://github.com/hp3icc/D-APRS.git
#sudo mv /opt/backup/HBlink3/ /opt/
sudo mv /opt/backup/D-APRS/ /opt/HBlink3
sudo mv /opt/backup/HBmonitor/ /opt/
#sudo mv /opt/backup/dmr_utils3/ /opt/
cd /opt/
sudo rm -r /opt/backup/
#cd /opt/dmr_utils3
#sudo chmod +x install.sh
#sudo ./install.sh
#sudo /usr/bin/python3 -m pip install --upgrade pip
#sudo pip install --upgrade dmr_utils3
cd /opt/HBlink3
cp rules_SAMPLE.py rules.py
sudo sed -i 's/REPORT_CLIENTS: 127.0.0.1/REPORT_CLIENTS: */' playback.cfg
sudo sed -i 's/REPORT: True/REPORT: False/' playback.cfg
sudo sed -i 's/54072/49063/' playback.cfg
chmod +x playback.py
cp hblink-SAMPLE.cfg hblink.cfg
sudo sed -i 's/REPORT_CLIENTS: 127.0.0.1/REPORT_CLIENTS: */' hblink.cfg
sudo sed -i 's/PORT: 54000/PORT: 62030/' hblink.cfg
sudo sed -i 's/54001/54901/' hblink.cfg
sudo sed -i 's/54002/54902/' hblink.cfg
sudo sed -i 's/tmp/var\/log\/hblink/' hblink.cfg
sudo sed -i 's/s3cr37w0rd/passw0rd/' hblink.cfg
sudo sed -i 's/MASTER_PORT: 62030/MASTER_PORT: 62031/' hblink.cfg
sudo sed -i 's/54070/49064/' hblink.cfg
sudo sed -i 's/54073/49062/' hblink.cfg
sudo sed -i 's/MASTER_PORT: 54072/MASTER_PORT: 49063/' hblink.cfg
rm gps_data.cfg
cp gps_data-SAMPLE.cfg gps_data.cfg
sudo sed -i 's/REPORT_CLIENTS: 127.0.0.1/REPORT_CLIENTS: */' gps_data.cfg
sudo sed -i 's/REPORT: True/REPORT: False/' gps_data.cfg
sudo sed -i 's/54071/49065/' gps_data.cfg
sudo sed -i 's/54070/49064/' gps_data.cfg
sudo sed -i 's/path\/to/opt\/HBlink3/' /opt/HBlink3/gps_data.cfg
#
cd /opt/
git clone https://github.com/hp3icc/D-APRS.git
sudo cat > /bin/menu-igate <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "FreeDMR D-APRS KF7EEL / Raspbian Proyect HP3ICC Esteban Mackay 73." --menu "Suba o Baje con las flechas del teclado y seleccione el numero de opcion:" 16 72 5 \
1 " Editar igate" \
2 " Iniciar Igate " \
3 " Detener Igate " \
4 " Salir del menu " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
nano /opt/D-APRS/gps_data.cfg ;;
2)
sudo systemctl stop daprs.service && sudo systemctl start daprs.service && sudo systemctl enable daprs.service ;;
3)
sudo systemctl stop daprs.service && sudo systemctl disable daprs.service ;;
4)
break;
esac
done
exit 0
EOF
#
cp /bin/menu-igate /bin/menu-igate2
sudo sed -i 's/FreeDMR/HBLink3/' /bin/menu-igate2
sudo sed -i 's/D-APRS/HBlink3/' /bin/menu-igate2
sudo sed -i 's/daprs/daprs2/' /bin/menu-igate2
sudo sed -i 's/daprs.service/daprs2.service/' /bin/menu-igate2
sudo sed -i 's/daprs.service/daprs2.service/' /bin/menu-igate2
sudo sed -i 's/daprs.service/daprs2.service/' /bin/menu-igate2
#
sudo cat > /lib/systemd/system/daprs.service <<- "EOF"
[Unit]
Description=Data bridge APRS
After=network-online.target syslog.target
Wants=network-online.target
[Service]
StandardOutput=null
WorkingDirectory=/opt/D-APRS
RestartSec=3
ExecStart=/usr/bin/python3 /opt/D-APRS/gps_data.py
Restart=on-abort
[Install]
WantedBy=multi-user.target
EOF
#
cp /lib/systemd/system/daprs.service /lib/systemd/system/daprs2.service
sudo sed -i 's/D-APRS/HBlink3/' /lib/systemd/system/daprs2.service
sudo sed -i 's/APRS/APRS2/' /lib/systemd/system/daprs2.service
#
sudo cat > /lib/systemd/system/hbparrot.service <<- "EOF"
[Unit]
Description=HB bridge all Service
After=network-online.target syslog.target
Wants=network-online.target
[Service]
StandardOutput=null
WorkingDirectory=/opt/HBlink3
RestartSec=3
ExecStart=/usr/bin/python3 /opt/HBlink3/playback.py -c /opt/HBlink3/playback.cfg
Restart=on-abort
[Install]
WantedBy=multi-user.target
EOF
#
sudo cat > /lib/systemd/system/hblink.service <<- "EOF"
[Unit]
Description=Start HBlink
After=multi-user.target
[Service]
User=root
ExecStart=/usr/bin/python3 /opt/HBlink3/bridge.py
[Install]
WantedBy=multi-user.target
EOF
############
sudo rm /opt/HBlink3/*.json
###############################
### Instalar el web monitor de HBLink.
cd /opt/HBmonitor
sudo chmod +x install.sh
sudo ./install.sh
sudo cp config_SAMPLE.py config.py
## Configurar el monitor
##nano /opt/HBmonitor/config.py
cd /opt/HBmonitor/
sudo sed -i 's/8080/80/' config.py
#cp utils/hbmon.service /lib/systemd/system/
sudo cat > /lib/systemd/system/hbmon.service <<- "EOF"
[Unit]
Description=HBMonitor
# To make the network-online.target available
# systemctl enable systemd-networkd-wait-online.service
After=network-online.target syslog.target
Wants=network-online.target
[Service]
User=root
StandardOutput=null
WorkingDirectory=/opt/HBmonitor
RestartSec=3
ExecStart=/usr/bin/python3 /opt/HBmonitor/monitor.py
Restart=on-abort
[Install]
WantedBy=multi-user.target
EOF
##################
#web
sudo groupadd www-data
sudo usermod -G www-data -a pi
sudo chown -R www-data:www-data /var/www/html
sudo chmod -R 775 /var/www/html
#############################
chmod +777 /var/www/html/*
##
cat > /opt/DMRIDUpdate.sh <<- "EOF"
#! /bin/bash
###############################################################################
#
# CONFIGURATION
#
# Full path to DMR ID file, without final slash
DMRIDPATH=/opt
DMRIDFILE=${DMRIDPATH}/DMRIds.dat
# DMR IDs now served by RadioID.net
#DATABASEURL='https://ham-digital.org/status/users.csv'
DATABASEURL='https://www.radioid.net/static/user.csv'
#
# How many DMR ID files do you want backed up (0 = do not keep backups)
DMRFILEBACKUP=1
#
# Command line to restart MMDVMHost
RESTARTCOMMAND="sudo systemctl restart mmdvmhost.service"
# RESTARTCOMMAND="killall MMDVMHost ; /path/to/MMDVMHost/executable/MMDVMHost /path/to/MMDVM/ini/file/MMDVM.ini"
###############################################################################
#
# Do not edit below here
#
###############################################################################
# Check we are root
if [ "$(id -u)" != "0" ]
then
echo "This script must be run as root" 1>&2
exit 1
fi
# Create backup of old file
if [ ${DMRFILEBACKUP} -ne 0 ]
then
cp ${DMRIDFILE} ${DMRIDFILE}.$(date +%d%m%y)
fi
# Prune backups
BACKUPCOUNT=$(ls ${DMRIDFILE}.* | wc -l)
BACKUPSTODELETE=$(expr ${BACKUPCOUNT} - ${DMRFILEBACKUP})
if [ ${BACKUPCOUNT} -gt ${DMRFILEBACKUP} ]
then
for f in $(ls -tr ${DMRIDFILE}.* | head -${BACKUPSTODELETE})
do
rm $f
done
fi
# Generate new file
curl ${DATABASEURL} 2>/dev/null | sed -e 's/\t//g' | awk -F"," '/,/{gsub(/ /, "", $2); printf "%s\t%s\t%s\n", $1, $2, $3}' | sed -e 's/\(.\) .*/\1/g' > ${DMRIDPATH}/DMRIds.tmp
NUMOFLINES=$(wc -l ${DMRIDPATH}/DMRIds.tmp | awk '{print $1}')
if [ $NUMOFLINES -gt 1 ]
then
mv ${DMRIDPATH}/DMRIds.tmp ${DMRIDFILE}
else
echo " ERROR during file update "
rm ${DMRIDPATH}/DMRIds.tmp
fi
# Restart ysf2dmr
eval ${RESTARTCOMMAND}
EOF
#######
cp /opt/DMRIDUpdate.sh /opt/MMDVMHost/
cd /opt/MMDVMHost/
sudo sed -i 's/\/opt/\/opt\/MMDVMHost/' DMRIDUpdate.sh
sudo sed -i 's/systemctl restart mmdvmhost.service/systemctl restart mmdvmh.service/' DMRIDUpdate.sh
cp /opt/DMRIDUpdate.sh /opt/YSF2DMR/
cd /opt/YSF2DMR/
sudo sed -i 's/\/opt/\/opt\/YSF2DMR/' DMRIDUpdate.sh
sudo sed -i 's/systemctl restart mmdvmhost.service/systemctl restart ysf2dmr.service/' DMRIDUpdate.sh
sudo rm /opt/DMRIDUpdate.sh
###########################
sudo systemctl disable lighttpd.service
sudo systemctl stop lighttpd.service
sudo systemctl stop analog_bridge.service
sudo systemctl stop mmdvm_bridge.service
sudo systemctl stop nxdngateway.service
sudo systemctl stop p25gateway.service
sudo systemctl stop ysfgateway.service
sudo systemctl disable analog_bridge.service
sudo systemctl disable mmdvm_bridge.service
sudo systemctl disable nxdngateway.service
sudo systemctl disable p25gateway.service
sudo systemctl disable ysfgateway.service
rm /var/log/mmdvm/*
###########################
cat > /etc/modprobe.d/raspi-blacklist.conf <<- "EOF"
blacklist snd_bcm2835
# blacklist spi and i2c by default (many users don't need them)
#blacklist spi-bcm2708
#blacklist i2c-bcm2708
blacklist snd-soc-pcm512x
blacklist snd-soc-wm8804
# dont load default drivers for the RTL dongle
blacklist dvb_usb_rtl28xxu
blacklist rtl_2832
blacklist rtl_2830
EOF
################################
cd /usr/share/alsa/
sudo sed -i 's/defaults.ctl.card 0/defaults.ctl.card 1/' alsa.conf
sudo sed -i 's/defaults.pcm.card 0/defaults.pcm.card 1/' alsa.conf
###################################
cat > /bin/cronedit.sh <<- "EOF"
cronjob_editor () {
# usage: cronjob_editor '<interval>' '<command>' <add|remove>
if [[ -z "$1" ]] ;then printf " no interval specified\n" ;fi
if [[ -z "$2" ]] ;then printf " no command specified\n" ;fi
if [[ -z "$3" ]] ;then printf " no action specified\n" ;fi
if [[ "$3" == add ]] ;then
# add cronjob, no duplication:
( sudo crontab -l | grep -v -F -w "$2" ; echo "$1 $2" ) | sudo crontab -
elif [[ "$3" == remove ]] ;then
# remove cronjob:
( sudo crontab -l | grep -v -F -w "$2" ) | sudo crontab -
fi
}
cronjob_editor "$1" "$2" "$3"
EOF
sudo chmod +x /bin/cronedit.sh
##############
cd /opt
git clone https://gitlab.hacknix.net/hacknix/FreeDMR.git
cd FreeDMR
mkdir config
#cp FreeDMR-SAMPLE-commented.cfg config/FreeDMR.cfg
#cp rules_SAMPLE.py config/rules.py
sudo chmod +x /opt/FreeDMR/*.py
sudo cat > /opt/FreeDMR/conf.txt <<- "EOF"
[EchoTest]
MODE: PEER
ENABLED: True
LOOSE: True
EXPORT_AMBE: False
IP:
#127.0.0.1
PORT: 49060
MASTER_IP: 127.0.0.1
MASTER_PORT: 49061
PASSPHRASE: passw0rd
CALLSIGN: ECHOTEST
RADIO_ID: 9990
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 3
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Local Parrot
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 3
OPTIONS:
#TS2=9990;DIAL=0;VOICE=0;TIMER=0
USE_ACL: True
SUB_ACL: DENY:1
TGID_TS1_ACL: DENY:ALL
TGID_TS2_ACL: PERMIT:9990
TS1_STATIC:
TS2_STATIC:9990
DEFAULT_REFLECTOR: 0
ANNOUNCEMENT_LANGUAGE: en_GB
GENERATOR: 0
DEFAULT_UA_TIMER: 999
SINGLE_MODE: True
VOICE_IDENT: False
EOF
#
cat FreeDMR-SAMPLE.cfg conf.txt >> /opt/FreeDMR/config/FreeDMR.cfg
sudo sed -i 's/REPORT_CLIENTS: 127.0.0.1/REPORT_CLIENTS: */' /opt/FreeDMR/config/FreeDMR.cfg
sudo sed -i 's/100/110/' /opt/FreeDMR/config/FreeDMR.cfg
sudo sed -i 's/file-timed/console-timed/' /opt/FreeDMR/config/FreeDMR.cfg
sudo sed -i 's/INFO/DEBUG/' /opt/FreeDMR/config/FreeDMR.cfg
sudo sed -i 's/freedmr.log/\/var\/log\/FreeDMR\/FreeDMR.log/' /opt/FreeDMR/config/FreeDMR.cfg
sudo sed -i 's/ANNOUNCEMENT_LANGUAGE: en_GB/ANNOUNCEMENT_LANGUAGE: es_ES/' /opt/FreeDMR/config/FreeDMR.cfg
rm /opt/FreeDMR/conf.txt
mv loro.cfg /opt/FreeDMR/playback.cfg
sudo sed -i 's/54915/49061/' /opt/FreeDMR/playback.cfg
#
sudo cat > /lib/systemd/system/proxy.service <<- "EOF"
[Unit]
Description= Proxy Service
After=multi-user.target
[Service]
User=root
#WorkingDirectory=/opt/FreeDMR
ExecStart=/usr/bin/python3 /opt/FreeDMR/hotspot_proxy_v2.py
[Install]
WantedBy=multi-user.target
EOF
#########
sudo cat > /lib/systemd/system/freedmr.service <<- "EOF"
[Unit]
Description=FreeDmr
After=multi-user.target
[Service]
User=root
#ExecStartPre=/bin/sleep 30
ExecStart=/usr/bin/python3 /opt/FreeDMR/bridge_master.py -c /opt/FreeDMR/config/FreeDMR.cfg -r /opt/FreeDMR/config/rules.py
[Install]
WantedBy=multi-user.target
EOF
###
sudo cat > /lib/systemd/system/fdmrparrot.service <<- "EOF"
[Unit]
Description=Freedmr Parrot
After=network-online.target syslog.target
Wants=network-online.target
[Service]
StandardOutput=null
WorkingDirectory=/opt/FreeDMR
RestartSec=3
ExecStart=/usr/bin/python3 /opt/FreeDMR/playback.py -c /opt/FreeDMR/playback.cfg
#/usr/bin/python3 /opt/HBlink3/playback.py -c /opt/HBlink3/playback.cfg
Restart=on-abort
[Install]
WantedBy=multi-user.target
EOF
#######
cd /opt
git clone https://github.com/sp2ong/HBMonv2.git
cd HBMonv2
sudo chmod +x install.sh
sudo ./install.sh
cp config_SAMPLE.py config.py
sudo chmod +x /opt/HBMonv2/monitor.py
sudo cat > /opt/HBMonv2/updateTGIDS.sh <<- "EOF"
#!/bin/bash
#sleep $[ ( $RANDOM % 1800 ) + 1 ]s
cd /opt/HBMonv2
FILE_NAME="talkgroup_ids.json"
FETCH_URL="http://downloads.freedmr.uk/downloads/talkgroup_ids.json"
OLD_MD5=`md5sum ${FILE_NAME}`
wget -O ${FILE_NAME} ${FETCH_URL}
NEW_MD5=`md5sum ${FILE_NAME}`
if [ "$NEW_MD5" != "$OLD_MD5" ]
then
echo "File is new, restarting"
sync ; echo 3 > /proc/sys/vm/drop_caches && sudo systemctl restart hbmon2.service
fi
EOF
####
sudo sed -i 's/localhost_2-day.png/localhost_1-day.png/' /opt/HBMonv2/html/sysinfo.php
cd /opt/HBMonv2/sysinfo/
sudo sed -i 's/var\/www\/html/opt\/HBMonv2\/html/' cpu.sh
sudo sed -i 's/var\/www\/html/opt\/HBMonv2\/html/' graph.sh
sudo chmod +x /opt/HBMonv2/sysinfo/cpu.sh
sudo chmod +x /opt/HBMonv2/sysinfo/graph.sh
sudo chmod +x /opt/HBMonv2/sysinfo/rrd-db.sh
sudo sh /opt/HBMonv2/sysinfo/rrd-db.sh
sudo chmod +x /opt/HBMonv2/updateTGIDS.sh
sudo cat > /opt/HBMonv2/html/buttons.html <<- "EOF"
<div style="width: 1100px;">
<!-- HBMonitor buttons HTML code -->
<a href="index.php"><button class="button link">&nbsp;Home&nbsp;</button></a>
<!--
&nbsp;
<div class="dropdown">
<button class="dropbtn">&nbsp;Admin Area&nbsp;</button>
<div class="dropdown-content">
<a href="masters.php">&nbsp;Masters&nbsp;</a>
<a href="peers.php">&nbsp;Peers&nbsp;</a>
<a href="opb.php">&nbsp;OpenBridge&nbsp;</a>
<a href="bridges.php">&nbsp;Bridges&nbsp;</a>
<a href="moni.php">&nbsp;Monitor&nbsp;</a>
<a href="sinfo.php">&nbsp;System Info&nbsp;</a>
</div>
</div>
--->
&nbsp;
<a href="masters.php"><button class="button link">&nbsp;Masters&nbsp;</button></a>
&nbsp;
<a href="peers.php"><button class="button link">&nbsp;Peers&nbsp;</button></a>
&nbsp;
<a href="opb.php"><button class="button link">&nbsp;OpenBridge&nbsp;</button></a>
&nbsp;
<a href="moni.php"><button class="button link">&nbsp;Monitor&nbsp;</button></a>
&nbsp;
<a href="sysinfo.php"><button class="button link">&nbsp;System Info&nbsp;</button></a>
&nbsp;
<a title="Lastheard long list" href="log.php"><button class="button link">&nbsp;Lastheard&nbsp;</button></a>
&nbsp;
<a href="http://www.freedmr.uk/index.php/why-use-freedmr/"target="_blank"><button class="button link">&nbsp;Info FreeDMR&nbsp;</button></a>
&nbsp;
<a href="http://www.freedmr.uk/index.php/freedmr-servers/"target="_blank"><button class="button link">&nbsp;Info Server&nbsp;</button></a>
&nbsp;
<a href="http://repeater.uk.freedmr.link/status/server_status.php"target="_blank"><button class="button link">&nbsp;Status Server&nbsp;</button></a>
&nbsp;
<a href="http://repeater.uk.freedmr.link/status/count.php"target="_blank"><button class="button link">&nbsp;Ranking TG&nbsp;</button></a>
&nbsp;
<!--
&nbsp;
<a href="bridges.php"><button class="button link">&nbsp;Bridges&nbsp;</button></a>
-->
<!-- Own buttons HTML code -->
<!-- Example of buttons dropdown HTML code -->
<!--
<p></p>
<div class="dropdown">
<button class="dropbtn">Admin Area</button>
<div class="dropdown-content">
<a href="masters.php">Master&Peer</a>
<a href="opb.php">OpenBridge</a>
<a href="moni.php">Monitor</a>
</div>
</div>
&nbsp;
<div class="dropdown">
<button class="dropbtn">Reflectors</button>
<div class="dropdown-content">
<a target='_blank' href="#">YSF Reflector</a>
<a target='_blank' href="#">XLX950</a>
</div>
</div>
-->
</div>
<p></p>
EOF
###
sudo cat > /lib/systemd/system/hbmon2.service <<- "EOF"
[Unit]
Description=HBMonitor
# To make the network-online.target available
# systemctl enable systemd-networkd-wait-online.service
After=network-online.target syslog.target
Wants=network-online.target
[Service]
StandardOutput=null
WorkingDirectory=/opt/HBMonv2
RestartSec=3
ExecStartPre=/bin/sleep 45
ExecStart=/usr/bin/python3 /opt/HBMonv2/monitor.py
Restart=on-abort
[Install]
WantedBy=multi-user.target
EOF
###################
######
sudo cat > /opt/FreeDMR/config/rules.py <<- "EOF"
'''
THIS EXAMPLE WILL NOT WORK AS IT IS - YOU MUST SPECIFY YOUR OWN VALUES!!!
In FreeDMR, the rules file should be *empty* unless you have static routing required. Please see the
documentation for more details.
This file is organized around the "Conference Bridges" that you wish to use. If you're a c-Bridge
person, think of these as "bridge groups". You might also liken them to a "reflector". If a particular
system is "ACTIVE" on a particular conference bridge, any traffid from that system will be sent
to any other system that is active on the bridge as well. This is not an "end to end" method, because
each system must independently be activated on the bridge.
The first level (e.g. "WORLDWIDE" or "STATEWIDE" in the examples) is the name of the conference
bridge. This is any arbitrary ASCII text string you want to use. Under each conference bridge
definition are the following items -- one line for each HBSystem as defined in the main HBlink
configuration file.
* SYSTEM - The name of the sytem as listed in the main hblink configuration file (e.g. hblink.cfg)
This MUST be the exact same name as in the main config file!!!
* TS - Timeslot used for matching traffic to this confernce bridge
XLX connections should *ALWAYS* use TS 2 only.
* TGID - Talkgroup ID used for matching traffic to this conference bridge
XLX connections should *ALWAYS* use TG 9 only.
* ON and OFF are LISTS of Talkgroup IDs used to trigger this system off and on. Even if you
only want one (as shown in the ON example), it has to be in list format. None can be
handled with an empty list, such as " 'ON': [] ".
* TO_TYPE is timeout type. If you want to use timers, ON means when it's turned on, it will
turn off afer the timout period and OFF means it will turn back on after the timout
period. If you don't want to use timers, set it to anything else, but 'NONE' might be
a good value for documentation!
* TIMOUT is a value in minutes for the timout timer. No, I won't make it 'seconds', so don't
ask. Timers are performance "expense".
* RESET is a list of Talkgroup IDs that, in addition to the ON and OFF lists will cause a running
timer to be reset. This is useful if you are using different TGIDs for voice traffic than
triggering. If you are not, there is NO NEED to use this feature.
'''
BRIDGES = {
'9990': [
{'SYSTEM': 'EchoTest', 'TS': 2, 'TGID': 9990, 'ACTIVE':True, 'TIMEOUT': 0, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': [], 'RESET': []},
],
}
if __name__ == '__main__':
from pprint import pprint
pprint(BRIDGES)
EOF
##########################
sudo timedatectl set-timezone America/Panama
#####
sudo cat > /boot/wpa_supplicant.conf <<- "EOF"
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=PA
##################################################################
# #
# Favor tomar como referencia, las dos redes wifi que aparecen #
# abajo, puede editar con los datos de su red wifi o agregar un #
# network nuevo, por cada red wifi nueva que quiera almacenar. #
# #
# Raspbian proyect by HP3ICC, 73. #
# #
##################################################################
network={
ssid="Coloque_aqui_nombre_de_red_wifi"
psk="Coloque_aqui_la_clave_wifi"
}
network={
ssid="WiFi-Net"
psk="Panama310"
}
EOF
################################################
#Direwolf
cd /opt/
git clone https://www.github.com/wb2osz/direwolf
cd direwolf
git checkout dev
mkdir build && cd build
cmake ..
make -j4
sudo make install
make install-conf
sudo cp /usr/local/bin/direwolf /opt/direwolf/direwolf2
cd /opt/direwolf
wget https://github.com/hp3icc/emq-TE1ws/raw/main/direwolf1
#############
cat > /opt/direwolf/rtl.sh <<- "EOF"
#!/bin/sh
PATH=/bin:/usr/bin:/usr/local/bin
unset LANG
rtl_fm -M fm -f 144.39M -p 0 -s 22050 -g 42 - | /usr/local/bin/direwolf -c /opt/direwolf/sdr.conf -r 22050 -D 1 -B 1200 -
EOF
sudo chmod +x /opt/direwolf/rtl.sh
#
cat > /opt/direwolf/sdr.conf <<- "EOF"
#############################################################
# #
# Configuration file for DireWolf #
# #
# Linux version setting by hp3icc #
# #
# emq-TE1ws #
# #
# configuration for SDR read-only IGate. #
#############################################################
ADEVICE null null
CHANNEL 0
MYCALL HP3ICC-10
PBEACON sendto=IG delay=0:40 every=30 symbol="/r" lat=08^31.27N long=080^21.59W comment="SDR APRS RX-IGATE / Raspbian Proyect by hp3icc"
# First you need to specify the name of a Tier 2 server.
# The current preferred way is to use one of these regional rotate addresses:
# noam.aprs2.net - for North America
# soam.aprs2.net - for South America
# euro.aprs2.net - for Europe and Africa
# asia.aprs2.net - for Asia
# aunz.aprs2.net - for Oceania
IGSERVER igates.aprs.fi:14580
#noam.aprs2.net
# You also need to specify your login name and passcode.
# Contact the author if you can't figure out how to generate the passcode.
IGLOGIN HP3ICC-10 12345
# That's all you need for a receive only IGate which relays
# messages from the local radio channel to the global servers.
#
#AGWPORT 8000
#KISSPORT 8001
EOF
###
cat > /opt/direwolf/dw.conf <<- "EOF"
#############################################################
# #
# Configuration file for DireWolf #
# #
# Linux version setting by hp3icc #
# #
# emq-TE1ws #
# #
#############################################################
#############################################################
# #
# FIRST AUDIO DEVICE PROPERTIES #
# (Channel 0 + 1 if in stereo) #
# #
#############################################################
ADEVICE plughw:1,0
#ADEVICE null null
# ADEVICE - plughw:1,0
# ADEVICE UDP:7355 default
# Number of audio channels for this souncard: 1 or 2.
#
ACHANNELS 1
#############################################################
# #
# CHANNEL 0 PROPERTIES #
# #
#############################################################
CHANNEL 0
MYCALL HP3ICC-10
MODEM 1200
#MODEM 1200 1200:2200
#MODEM 300 1600:1800
#MODEM 9600 0:0
#
#MODEM 1200 E+ /3
#
#
# If not using a VOX circuit, the transmitter Push to Talk (PTT)
# DON'T connect it directly!
#
# For the PTT command, specify the device and either RTS or DTR.
# RTS or DTR may be preceded by "-" to invert the signal.
# Both can be used for interfaces that want them driven with opposite polarity.
#
# COM1 can be used instead of /dev/ttyS0, COM2 for /dev/ttyS1, and so on.
#
#PTT CM108
#PTT COM1 RTS
#PTT COM1 RTS -DTR
#PTT /dev/ttyUSB0 RTS
#PTT /dev/ttyUSB0 DTR
#PTT GPIO 25
#PTT GPIO 26
# The Data Carrier Detect (DCD) signal can be sent to the same places
# as the PTT signal. This could be used to light up an LED like a normal TNC.
#DCD COM1 -DTR
#DCD GPIO 24
#pin18 (GPIO 24) - (cathode) LED (anode) - 270ohm resistor - 3.3v
#DCD GPIO 13
#############################################################
# #
# VIRTUAL TNC SERVER PROPERTIES #
# #
#############################################################
#
# Dire Wolf acts as a virtual TNC and can communicate with
# client applications by different protocols:
#
# - the "AGW TCPIP Socket Interface" - default port 8000
# - KISS protocol over TCP socket - default port 8001
# - KISS TNC via pseudo terminal (-p command line option)
#
#Setting to 0 disables UI-proto only AGW and TCP-KISS ports
AGWPORT 8000
KISSPORT 8001
#KISSPORT 0
#
# It is sometimes possible to recover frames with a bad FCS.
# This applies to all channels.
# 0 [NONE] - Don't try to repair.
# 1 [SINGLE] - Attempt to fix single bit error. (default)
# 2 [DOUBLE] - Also attempt to fix two adjacent bits.
# ... see User Guide for more values and in-depth discussion.
#
#FIX_BITS 0
#Enable fixing of 1 bits and use generic AX25 heuristics data (not APRS heuristi$
#FIX_BITS 1 AX25
#
#############################################################
# #
# BEACONING PROPERTIES #
# #
#############################################################
#GPSD
#TBEACON symbol="/v" comment="HP3ICC-9 / APRS TRACKER / Raspbian Proyect by hp3icc" via=WIDE2-2
#SMARTBEACONING 28 0:30 12 0:1800 0:30 15 45 via=WIDE2-2
#
#PBEACON delay=0:05 every=30 symbol="/r" lat=08^31.27N long=080^21.59W comment="APRS DIGI-IGATE / Raspbian Proyect by hp3icc" via=WIDE2-2
#PBEACON sendto=IG delay=0:40 every=30 symbol="/r" lat=08^31.27N long=080^21.59W comment="APRS DIGI-IGATE / Raspbian Proyect by hp3icc"
#############################################################
# #
# DIGIPEATER PROPERTIES #
# #
#############################################################
DIGIPEAT 0 0 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
FILTER 0 0 t/poimqstunw
#############################################################
# #
# INTERNET GATEWAY #
# #
#############################################################
# First you need to specify the name of a Tier 2 server.
# The current preferred way is to use one of these regional rotate addresses:
# noam.aprs2.net - for North America
# soam.aprs2.net - for South America
# euro.aprs2.net - for Europe and Africa
# brazil.d2g.com
#
#IGSERVER igates.aprs.fi:14580
#IGSERVER noam.aprs2.net:14580
#IGSERVER cx2sa.net:14580
#IGLOGIN HP3ICC-10 12345
IGTXVIA 0 WIDE2-2
#WIDE1-1,WIDE2-1
#WIDE2-2
#
#
#IGFILTER b/HP3ICC-5
#IGFILTER p/HP
#m/600
#
FILTER IG 0 t/p
#poimqstunw
IGTXLIMIT 6 10
#
EOF
#
cd /tmp/
wget -O gotty.tar.gz https://github.com/yudai/gotty/releases/latest/download/gotty_linux_arm.tar.gz
tar xf gotty.tar.gz
sudo mv gotty /usr/local/bin
rm gotty.tar.gz
sudo chmod a+x /usr/local/bin/gotty
#
sudo cat > /lib/systemd/system/gotty.service <<- "EOF"
[Unit]
Description=GoTTY
After=multi-user.target
[Service]
User=root
Environment=TERM=xterm-256color
ExecStartPre=/bin/sleep 40
ExecStart=gotty -p "8022" -w -c "pi:Panama507" menu
[Install]
WantedBy=multi-user.target
EOF
#
cd /opt/
wget https://github.com/hp3icc/emq-TE1ws/raw/main/setup-network.sh
chmod +x setup-network.sh
sudo ./setup-network.sh --install --ap-ssid="emq-TE1-AP" --ap-password="Panama507" --ap-password-encrypt
--ap-country-code="PA" --ap-ip-address="192.168.50.1" --wifi-interface="wlan0"
#
sudo chown -R mmdvm:mmdvm /opt/MMDVMHost/MMDVMHost
cp /bin/menu /bin/MENU
sudo chmod +x /bin/MENU
sudo chmod +x /bin/menu*
sudo chmod +777 /opt/*
sudo chmod +777 /opt/MMDVMHost-Websocketboard/*
sudo chmod +777 /opt/WSYSFDash/*
sudo chmod +777 /opt/direwolf/*
sudo chmod +777 /opt/direwolf/dw.conf
sudo chmod +777 /opt/direwolf/sdr.conf
sudo chmod +777 /opt/direwolf/src/*
sudo chmod +777 /opt/MMDVMHost/*
sudo chmod +777 /opt/MMDVMHost/MMDVM.ini
sudo chmod +777 /opt/YSF2DMR/*
sudo chmod +777 /opt/YSF2DMR/YSF2DMR.ini
sudo chmod +777 /opt/ionsphere/*
sudo chmod +777 /opt/ionsphere/ionosphere-raspberry-pi/config/config.yml
sudo chmod +777 /opt/pymultimonaprs/*
sudo chmod +777 /opt/multimon-ng/*
sudo chmod +777 /opt/kalibrate-rtl/*
sudo chmod +777 /opt/YSFClients/*
sudo chmod +777 /opt/MMDVM_CM/*
sudo chmod +777 /opt/MMDVM_Bridge/*
sudo chmod +777 /opt/MMDVM_Bridge/MMDVM_Bridge.ini
sudo chmod +777 /etc/pymultimonaprs.json
sudo chmod +777 /opt/D-APRS/user_settings.txt
sudo chmod +777 /opt/HBlink3/user_settings.txt
sudo chmod +x /opt/HBMonv2/sysinfo/graph.sh
sudo chmod +x /opt/HBMonv2/sysinfo/cpu.sh
sudo chmod +x /usr/bin/python3
sudo chmod +x /opt/HBmonitor/monitor.py
sudo chmod +x /opt/HBlink3/*.py
sudo chmod +x /opt/YSF2DMR/DMRIDUpdate.sh
sudo chmod +x /opt/MMDVMHost/DMRIDUpdate.sh
sudo chmod +x /opt/D-APRS/*.py
sudo chmod +x /usr/local/bin/rebooter1.sh
sudo chmod 755 /lib/systemd/system/gotty.service
sudo chmod 755 /usr/local/bin/rebooter1.sh
sudo chmod 755 /lib/systemd/system/daprs.service
sudo chmod 755 /lib/systemd/system/daprs2.service
sudo chmod 755 /lib/systemd/system/http.server-dvs.service
sudo chmod 755 /lib/systemd/system/http.server-fmr.service
sudo chmod 755 /lib/systemd/system/freedmr.service
sudo chmod 755 /lib/systemd/system/proxy.service
sudo chmod 755 /lib/systemd/system/hbmon2.service
sudo chmod 755 /lib/systemd/system/hblink.service
sudo chmod 755 /lib/systemd/system/hbmon.service
sudo chmod 755 /lib/systemd/system/hbparrot.service
sudo chmod 755 /lib/systemd/system/YSFReflector.service
sudo chmod 755 /lib/systemd/system/monp.service
sudo chmod 755 /lib/systemd/system/dmrid-ysf2dmr.service
sudo chmod 755 /lib/systemd/system/dmrid-mmdvm.service
sudo chmod 755 /lib/systemd/system/mmdvmh.service
sudo chmod 755 /lib/systemd/system/direwolf.service
sudo chmod 755 /lib/systemd/system/direwolf-rtl.service
sudo chmod 755 /lib/systemd/system/multimon-rtl.service
sudo chmod 755 /lib/systemd/system/ionos.service
sudo chmod 755 /lib/systemd/system/ysf2dmr.service
sudo chmod 755 /lib/systemd/system/http.server-mmdvmh.service
sudo chmod 755 /lib/systemd/system/logtailer-mmdvmh.service
sudo chmod 755 /lib/systemd/system/http.server-ysf.service
sudo chmod 755 /lib/systemd/system/logtailer-ysf.service
sudo systemctl daemon-reload
sudo systemctl enable monp.service
sudo systemctl stop rsyslog
sudo systemctl disable rsyslog
sudo systemctl stop webproxy.service
sudo systemctl disable webproxy.service
sudo systemctl enable gotty.service
rm /var/log/syslog*
rm /var/log/*.log*
cd /tmp/
cronedit.sh '* */1 * * *' 'sudo sync ; echo 3 > /proc/sys/vm/drop_caches >/dev/null 2>&1' add
#####
cat > /tmp/completado.sh <<- "EOF"
#!/bin/bash
while : ; do
choix=$(whiptail --title "Raspbian Proyect HP3ICC Esteban Mackay 73." --menu " Precione enter (return o intro) para finalizar la instalacion y reiniciar" 11 85 3 \
1 " Iniciar Reinicio de equipo " 3>&1 1>&2 2>&3)
exitstatus=$?
#on recupere ce choix
#exitstatus=$?
if [ $exitstatus = 0 ]; then
echo "Your chosen option:" $choix
else
echo "You chose cancel."; break;
fi
# case : action en fonction du choix
case $choix in
1)
sudo reboot
;;
esac
done
exit 0
EOF
###
sudo chmod +x /tmp/completado.sh
history -c && history -w
##
sudo update-rc.d dphys-swapfile remove
sudo chmod -x /etc/init.d/dphys-swapfile
sudo dphys-swapfile swapoff
sudo swapoff -a
sudo rm /var/swap
sudo dphys-swapfile uninstall
cd /etc/
sudo sed -i 's/CONF_SWAPSIZE=100/CONF_SWAPSIZE=0/' dphys-swapfile
##
sh /tmp/completado.sh
Reference in New Issue View Git Blame Copy Permalink