upd ratelimit, ILI9342 (M5Stack) font fix

RX_FSK/src/Display.cpp

@@ -482,6 +482,7 @@ struct gfxoffset_t gfxoffsets[MAXFONT];
 
 void calc_gfx_offsets() {
 	for(int i=0; i<ngfx; i++) {
+
 		// find offset from top to baseline
 		int bofs = 0;
 		GFXglyph *g = gfl[i]->glyph;
@@ -496,6 +497,9 @@ void calc_gfx_offsets() {
 			if(h>hgt) hgt=h;
 		}
 		gfxoffsets[i].yclear = hgt;
+///// 	The GFX library does things differently, and if we end up with a smaller baseline then positions might be out of bounds
+/////   causing a lack of background on ILI9342.  Make sure that we use a large enough baseline!
+	        gfxoffsets[i].yofs = gfl[i]->yAdvance * 2 / 3;
 		printf("Font %d: yofs=%d, yclear=%d\n", i, gfxoffsets[i].yofs, gfxoffsets[i].yclear);
 	}
 }

RX_FSK/src/conn-aprs.cpp

@@ -73,15 +73,24 @@ void ConnAPRS::updateSonde( SondeInfo *si ) {
     char *str = aprs_senddata(si, sonde.config.call, sonde.config.objcall, sonde.config.tcpfeed.symbol);
 
     Serial.printf("udpfedd active: %d  tcpfeed active: %d\n", sonde.config.udpfeed.active, sonde.config.tcpfeed.active);
+    unsigned long now = millis();
     // Output via AXUDP
     if(sonde.config.udpfeed.active) {
-        char raw[201];
-        int rawlen = aprsstr_mon2raw(str, raw, APRS_MAXLEN);
-        Serial.println("Sending AXUDP");
-        //Serial.println(raw);
-         udp.beginPacket(udphost, udpport);
-         udp.write((const uint8_t *)raw, rawlen);
-         udp.endPacket();
+	static unsigned long lastudp = 0;
+	long tts = sonde.config.udpfeed.ratelimit * 1000L - (now - lastudp);
+	Serial.printf("aprs-udp: now-last = %ld\n", (now - lastudp));
+	if ( tts < 0 ) {
+            char raw[201];
+            int rawlen = aprsstr_mon2raw(str, raw, APRS_MAXLEN);
+            Serial.println("Sending AXUDP");
+            //Serial.println(raw);
+            udp.beginPacket(udphost, udpport);
+            udp.write((const uint8_t *)raw, rawlen);
+            udp.endPacket();
+	    lastudp = now;
+	} else {
+	    Serial.printf("Sending APRS-UDP in %d s\n", (int)(tts/1000));
+	}
     }
     // KISS via TCP (incoming connection, e.g. from APRSdroid
     if (tncclient.connected()) {
@@ -96,7 +105,6 @@ void ConnAPRS::updateSonde( SondeInfo *si ) {
         static unsigned long lasttcp = 0;
         tcpclient_fsm();
         if(aprs[0].tcpclient_state == TCS_CONNECTED || aprs[1].tcpclient_state == TCS_CONNECTED) {
-            unsigned long now = millis();
             long tts =  sonde.config.tcpfeed.highrate * 1000L - (now-lasttcp);
             Serial.printf("aprs: now-last = %ld\n", (now - lasttcp));
             if ( tts < 0 ) {

RX_FSK/src/conn-sdcard.cpp

@@ -41,6 +41,7 @@ void ConnSDCard::init() {
   uint32_t totalSize = SD.totalBytes() / (1024 * 1024);
   Serial.printf("SD Card used/total: %lu/%lu MB\n", usedSize, totalSize);
 
+#if 0
   file = SD.open("/data.csv", FILE_APPEND);
   if (!file) {
     Serial.println("Cannot open file");
@@ -51,7 +52,6 @@ void ConnSDCard::init() {
 
   //sdf = SD.open("/data.csv", FILE_READ);
 
-#if 0
   // Just testcode
   DIR *dir = opendir("/sd/");
   struct dirent *dent;

RX_FSK/version.h

@@ -1,4 +1,4 @@
 const char *version_name = "rdzTTGOsonde";
-const char *version_id = "dev20240905b";
+const char *version_id = "dev20240912";
 const int SPIFFS_MAJOR=3;
 const int SPIFFS_MINOR=3;