# Definition of display content and action behaviour
#
# Timer: (view timer, rx timer, norx timer)
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
# - view timer: time since current view (display mode and sonde) was started
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
# - norx timer: time since when no sonde data has been received continuously
#   (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
#    anything for a 1s period)
# 
# Actions:
# - W: activate WiFi scan
# - F: activate frequency spectrum display
# - 0: activate "Scan:" display (this is basically just display mode 0)
# - x: (1..N): activate display mode x
# - D: activate default receiver display (display mode specified in config)
# - +: advance to next active sonde from QRG config
# - #: no action
#
# Display content (lower/upper case: small/large font)
#    line,column=content
#
# XText : Text
# F(suffix): frequency (with suffix, e.g., " MHz")
# L latitade
# O lOngitute
# A altitude
# H hor. speed
# V vert. speef
# Ix sonde ID (dfm format by x: d=>dxlaprs, a=>autorx, s=>real serial number)
# Q signal quality statistics bar
# T type string (RS41/DFM9/DFM6/RS92)
# C afC value
# N ip address (only tiny font)
# S launch site
# Mx telemetry value x (t temp p preassure h hyg)
# Gx value relativ to GPS reference point (x: D dist, I direction)  GV. GPS valid symbol;  GL, GO, GA: ref lat long alt
# R RSSI
###########
# 
# Default configuration for "Scanner" display:
# - view timer disabled;  rx timer=0; norx timer = 0
#   => after 1 second immediately an action is triggered
#      (norx: go to next sonde; rx: go to default receiver display)
# - key1 actions: D,0,F,W
#   => Button press activates default receiver view, double press does nothing
#      Mid press activates Spectrum display, long press activates Wifi scan
# - key2 has no function
@Scanner:5
timer=-1,0,0
key1action=D,#,F,W
key2action=#,#,#,#
timeaction=#,D,+
0,0=XScan:
0,8=T
3,0=F MHz
5,0=S
7,5=n

############
# Default configuration for "Legacy" display:
# - view timer=-1, rx timer=-1 (disabled); norx timer=20000 (or -1 for "old" behaviour)
#    => norx timer fires after not receiving a singla for 20 seconds
# - key1 actions: +,0,F,W
#    => Button1 press: next sonde; double press => @Scanner display
#    => Mid press activates Spectrum display, long press activates Wifi scan
# - key2 actions: 2,#,#,#
#    => BUtton2 activates display 2 (@Field)
# - timer actions: #,#,0
#   (norx timer: if no signal for >20 seconds: go back to scanner mode)
#
@Legacy:11
timer=-1,-1,20000
key1action=+,0,F,W
key2action=2,#,#,#
timeaction=#,#,0
0,5=f MHz
1,8=c
0,0=t
1,0=is
2,0=L
4,0=O
2,10=a
3,10=h
4,9=v
6,0=R
6,7=Q

############
# Configuratoon for "Field" display (display 2)
# similar to @Legacy, but no norx timer, and Key2 goes to display 4
@Field:7
timer=-1,-1,-1
key1action=+,0,F,W
key2action=3,#,#,#
timeaction=#,#,#
2,0=L
4,0=O
3,10=h
4,9=v
0,0=Is
6,0=A
6,7=Q

############
# Configuration for "Field2" display (display 3)
# similar to @Field
@Field2:9
timer=-1,-1,-1
key1action=+,0,F,W
key2action=4,#,#,#
timeaction=#,#,#
2,0=L
4,0=O
1,12=t
0,9=f
3,10=h
4,9=v
0,0=Is
6,0=A
6,7=Q

#############
# Configuration for "GPS" display
# not yet the final version, just for testing
@GPSDIST:14
timer=-1,-1,-1
key1action=+,0,F,W
key2action=1,#,#,#
timeaction=#,#,#
0,0=Is
0,9=f
1,12=t
2,0=L
4,0=O
2,10=a
3,10=h
4,9=v
6,7=Q
7,0=gV
7,2=xd=
7,4=gD
7,12=gI°