ua1zbe
/
rdz_ttgo_sonde_dl9rdz
mirror of https://github.com/dl9rdz/rdz_ttgo_sonde
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
rdz_ttgo_sonde_dl9rdz/RX_FSK/RX_FSK.ino

1631 lines
51 KiB
C++
Raw Blame History

#include <WiFi.h>
#include <WiFiUdp.h>
#include <ESPAsyncWebServer.h>
#include <SPIFFS.h>
#include <U8x8lib.h>
#include <U8g2lib.h>
#include <SPI.h>
#include <Update.h>
#include <ESPmDNS.h>
#include <SX1278FSK.h>
#include <Sonde.h>
#include <Display.h>
#include <Scanner.h>
#include <aprs.h>
#include "version.h"
// UNCOMMENT one of the constructor lines below
U8X8_SSD1306_128X64_NONAME_SW_I2C *u8x8 = NULL; // initialize later after reading config file
//U8X8_SSD1306_128X64_NONAME_SW_I2C u8x8(/* clock=*/ OLED_SCL, /* data=*/ OLED_SDA, /* reset=*/ OLED_RST); // Unbuffered, basic graphics, software I2C
//U8G2_SSD1306_128X64_NONAME_1_SW_I2C Display(U8G2_R0, /* clock=*/ OLED_SCL, /* data=*/ OLED_SDA, /* reset=*/ OLED_RST); // Page buffer, SW I2C
//U8G2_SSD1306_128X64_NONAME_F_SW_I2C Display(U8G2_R0, /* clock=*/ OLED_SCL, /* data=*/ OLED_SDA, /* reset=*/ OLED_RST); // Full framebuffer, SW I2C
int LORA_LED = 9; // default POUT for LORA LED used as serial monitor
int e;
enum MainState { ST_DECODER, ST_SCANNER, ST_SPECTRUM, ST_WIFISCAN, ST_UPDATE };
static MainState mainState = ST_WIFISCAN; // ST_WIFISCAN;
AsyncWebServer server(80);
String updateHost = "rdzsonde.my.to";
int updatePort = 80;
String updateBinM = "/master/update.ino.bin";
String updateBinD = "/devel/update.ino.bin";
String *updateBin = &updateBinM;
#define LOCALUDPPORT 9002
boolean connected = false;
WiFiUDP udp;
WiFiClient client;
enum KeyPress { KP_NONE = 0, KP_SHORT, KP_DOUBLE, KP_MID, KP_LONG };
struct Button {
uint8_t pin;
uint32_t numberKeyPresses;
KeyPress pressed;
unsigned long press_ts;
boolean doublepress;
};
Button button1 = {0, 0, KP_NONE, 0, false};
// Set LED GPIO
int ledPin = 1;
// Stores LED state
String ledState;
// timestamp when spectrum display was activated
static unsigned long specTimer;
// Replaces placeholder with LED state value
String processor(const String& var) {
Serial.println(var);
if (var == "STATE") {
if (digitalRead(ledPin)) {
ledState = "ON";
}
else {
ledState = "OFF";
}
Serial.print(ledState);
return ledState;
}
if (var == "VERSION_NAME") {
return String(version_name);
}
if (var == "VERSION_ID") {
return String(version_id);
}
return String();
}
const String sondeTypeSelect(int activeType) {
String sts = "";
for (int i = 0; i < 3; i++) {
sts += "<option value=\"";
sts += sondeTypeStr[i];
sts += "\"";
if (activeType == i) {
sts += " selected";
}
sts += ">";
sts += sondeTypeStr[i];
sts += "</option>";
}
return sts;
}
//trying to work around
//"assertion "heap != NULL && "free() target pointer is outside heap areas"" failed:"
// which happens if request->send is called in createQRGForm!?!??
char message[10240 * 4]; //needs to be large enough for all forms (not checked in code)
// QRG form is currently about 24kb with 100 entries
///////////////////////// Functions for Reading / Writing QRG list from/to qrg.txt
void setupChannelList() {
File file = SPIFFS.open("/qrg.txt", "r");
if (!file) {
Serial.println("There was an error opening the file '/qrg.txt' for reading");
return;
}
int i = 0;
char launchsite[17];
sonde.clearSonde();
Serial.println("Reading channel config:");
while (file.available()) {
String line = file.readStringUntil('\n');
String sitename;
if (!file.available()) break;
if (line[0] == '#') continue;
char *space = strchr(line.c_str(), ' ');
if (!space) continue;
*space = 0;
float freq = atof(line.c_str());
SondeType type;
if (space[1] == '4') {
type = STYPE_RS41;
}
else if (space[1] == '9') {
type = STYPE_DFM09;
}
else if (space[1] == '6') {
type = STYPE_DFM06;
}
else continue;
int active = space[3] == '+' ? 1 : 0;
if (space[4] == ' ') {
sitename = line.substring(12) + " "; // Don't change start of substr(12) !!!!
int str_len = sitename.length() + 1;
sitename.toCharArray(launchsite, 17);
if (sonde.config.debug == 1) {
Serial.printf("Add %f - sondetype: %d (on/off: %d) - site #%d - name: %s\n ", freq, type, active, i, launchsite);
//Serial.println(sitename);
}
}
sonde.addSonde(freq, type, active, launchsite);
i++;
}
file.close();
}
const char *createQRGForm() {
char *ptr = message;
strcpy(ptr, "<html><head><link rel=\"stylesheet\" type=\"text/css\" href=\"style.css\"></head><body><form action=\"qrg.html\" method=\"post\"><table><tr><th>ID</th><th>Active</th><th>Freq</th><th>Launchsite</th><th>Mode</th></tr>");
for (int i = 0; i < sonde.config.maxsonde; i++) {
String s = sondeTypeSelect(i >= sonde.nSonde ? 2 : sonde.sondeList[i].type);
String site = sonde.sondeList[i].launchsite;
sprintf(ptr + strlen(ptr), "<tr><td>%d</td><td><input name=\"A%d\" type=\"checkbox\" %s/></td>"
"<td><input name=\"F%d\" type=\"text\" value=\"%3.3f\"></td>"
"<td><input name=\"S%d\" type=\"text\" value=\"%s\"></td>"
"<td><select name=\"T%d\">%s</select></td>",
i + 1,
i + 1, (i < sonde.nSonde && sonde.sondeList[i].active) ? "checked" : "",
i + 1, i >= sonde.nSonde ? 400.000 : sonde.sondeList[i].freq,
i + 1, i >= sonde.nSonde ? " " : sonde.sondeList[i].launchsite,
i + 1, s.c_str());
}
strcat(ptr, "</table><input type=\"submit\" value=\"Update\"/></form></body></html>");
return message;
}
const char *handleQRGPost(AsyncWebServerRequest *request) {
char label[10];
// parameters: a_i, f_1, t_i (active/frequency/type)
#if 1
File file = SPIFFS.open("/qrg.txt", "w");
if (!file) {
Serial.println("Error while opening '/qrg.txt' for writing");
return "Error while opening '/qrg.txt' for writing";
}
#endif
Serial.println("Handling post request");
#if 0
int params = request->params();
for (int i = 0; i < params; i++) {
String pname = request->getParam(i)->name();
Serial.println(pname.c_str());
}
#endif
for (int i = 1; i <= sonde.config.maxsonde; i++) {
snprintf(label, 10, "A%d", i);
AsyncWebParameter *active = request->getParam(label, true);
snprintf(label, 10, "F%d", i);
AsyncWebParameter *freq = request->getParam(label, true);
snprintf(label, 10, "S%d", i);
AsyncWebParameter *launchsite = request->getParam(label, true);
if (!freq) continue;
snprintf(label, 10, "T%d", i);
AsyncWebParameter *type = request->getParam(label, true);
if (!type) continue;
String fstring = freq->value();
String tstring = type->value();
String sstring = launchsite->value();
const char *fstr = fstring.c_str();
const char *tstr = tstring.c_str();
const char *sstr = sstring.c_str();
Serial.printf("Processing a=%s, f=%s, t=%s, site=%s\n", active ? "YES" : "NO", fstr, tstr, sstr);
char typech = (tstr[2] == '4' ? '4' : tstr[3]); // Ugly TODO
file.printf("%3.3f %c %c %s\n", atof(fstr), typech, active ? '+' : '-', sstr);
}
file.close();
Serial.println("Channel setup finished");
Serial.println();
delay(500);
setupChannelList();
}
/////////////////// Functions for reading/writing Wifi networks from networks.txt
#define MAX_WIFI 10
int nNetworks;
struct {
String id;
String pw;
} networks[MAX_WIFI];
// FIXME: For now, we don't uspport wifi networks that contain newline or null characters
// ... would require a more sophisicated file format (currently one line SSID; one line Password
void setupWifiList() {
File file = SPIFFS.open("/networks.txt", "r");
if (!file) {
Serial.println("There was an error opening the file '/networks.txt' for reading");
networks[0].id = "RDZsonde";
networks[0].pw = "RDZsonde";
return;
}
int i = 0;
while (file.available()) {
String line = file.readStringUntil('\n');
if (!file.available()) break;
networks[i].id = line;
networks[i].pw = file.readStringUntil('\n');
i++;
}
nNetworks = i;
Serial.print(i); Serial.println(" networks in networks.txt\n");
for (int j = 0; j < i; j++) {
Serial.print(networks[j].id);
Serial.print(": ");
Serial.println(networks[j].pw);
}
}
const char *createWIFIForm() {
char *ptr = message;
char tmp[4];
strcpy(ptr, "<html><head><link rel=\"stylesheet\" type=\"text/css\" href=\"style.css\"></head><body><form action=\"wifi.html\" method=\"post\"><table><tr><th>Nr</th><th>SSID</th><th>Password</th></tr>");
for (int i = 0; i < MAX_WIFI; i++) {
sprintf(tmp, "%d", i);
sprintf(ptr + strlen(ptr), "<tr><td>%s</td><td><input name=\"S%d\" type=\"text\" value=\"%s\"/></td>"
"<td><input name=\"P%d\" type=\"text\" value=\"%s\"/></td>",
i == 0 ? "<b>AP</b>" : tmp,
i + 1, i < nNetworks ? networks[i].id.c_str() : "",
i + 1, i < nNetworks ? networks[i].pw.c_str() : "");
}
strcat(ptr, "</table><input type=\"submit\" value=\"Update\"></input></form></body></html>");
return message;
}
const char *handleWIFIPost(AsyncWebServerRequest *request) {
char label[10];
// parameters: a_i, f_1, t_i (active/frequency/type)
#if 1
File f = SPIFFS.open("/networks.txt", "w");
if (!f) {
Serial.println("Error while opening '/networks.txt' for writing");
return "Error while opening '/networks.txt' for writing";
}
#endif
Serial.println("Handling post request");
#if 0
int params = request->params();
for (int i = 0; i < params; i++) {
String param = request->getParam(i)->name();
Serial.println(param.c_str());
}
#endif
for (int i = 1; i <= MAX_WIFI; i++) {
snprintf(label, 10, "S%d", i);
AsyncWebParameter *ssid = request->getParam(label, true);
if (!ssid) continue;
snprintf(label, 10, "P%d", i);
AsyncWebParameter *pw = request->getParam(label, true);
if (!pw) continue;
String sstring = ssid->value();
String pstring = pw->value();
const char *sstr = sstring.c_str();
const char *pstr = pstring.c_str();
if (strlen(sstr) == 0) continue;
Serial.printf("Processing S=%s, P=%s\n", sstr, pstr);
f.printf("%s\n%s\n", sstr, pstr);
}
f.close();
setupWifiList();
}
// Show current status
void addSondeStatus(char *ptr, int i)
{
SondeInfo *s = &sonde.sondeList[i];
strcat(ptr, "<table>");
sprintf(ptr + strlen(ptr), "<tr><td id=\"sfreq\">%3.3f MHz, Type: %s</td><tr><td>ID: %s</td></tr><tr><td>QTH: %.6f,%.6f h=%.0fm</td></tr>\n",
s->freq, sondeTypeStr[s->type],
s->validID ? s->id : "<??>",
s->lat, s->lon, s->alt);
sprintf(ptr + strlen(ptr), "<tr><td><a target=\"_empty\" href=\"geo:%.6f,%.6f\">GEO-App</a> - ", s->lat, s->lon);
sprintf(ptr + strlen(ptr), "<a target=\"_empty\" href=\"https://wx.dl2mf.de/?%s\">WX.DL2MF.de</a> - ", s->id);
sprintf(ptr + strlen(ptr), "<a target=\"_empty\" href=\"https://www.openstreetmap.org/?mlat=%.6f&mlon=%.6f&zoom=14\">OSM</a></td></tr>", s->lat, s->lon);
strcat(ptr, "</table><p/>\n");
}
const char *createStatusForm() {
char *ptr = message;
strcpy(ptr, "<html><head><link rel=\"stylesheet\" type=\"text/css\" href=\"style.css\"><meta http-equiv=\"refresh\" content=\"5\"></head><body>");
for (int i = 0; i < sonde.nSonde; i++) {
addSondeStatus(ptr, (i + sonde.currentSonde) % sonde.nSonde);
}
strcat(ptr, "</body></html>");
return message;
}
///////////////////// Config form
void setupConfigData() {
File file = SPIFFS.open("/config.txt", "r");
if (!file) {
Serial.println("There was an error opening the file '/config.txt' for reading");
return;
}
while (file.available()) {
String line = file.readStringUntil('\n');
sonde.setConfig(line.c_str());
}
}
struct st_configitems {
const char *name;
const char *label;
int type; // 0: numeric; i>0 string of length i; -1: separator; -2: type selector
void *data;
};
struct st_configitems config_list[] = {
/* General config settings */
{"wifi", "Wifi mode (0/1/2/3)", 0, &sonde.config.wifi},
{"debug", "Debug mode (0/1)", 0, &sonde.config.debug},
{"maxsonde", "Maxsonde (requires reboot?)", 0, &sonde.config.maxsonde},
{"display", "Display mode (1/2/3)", 0, &sonde.config.display},
{"---", "---", -1, NULL},
/* Spectrum display settings */
{"spectrum", "ShowSpectrum (s)", 0, &sonde.config.spectrum},
{"startfreq", "Startfreq (MHz)", 0, &sonde.config.startfreq},
{"channelbw", "Bandwidth (kHz)", 0, &sonde.config.channelbw},
{"timer", "Spectrum Timer", 0, &sonde.config.timer},
{"marker", "Spectrum MHz marker", 0, &sonde.config.marker},
{"noisefloor", "Sepctrum noisefloor", 0, &sonde.config.noisefloor},
{"showafc", "Show AFC value", 0, &sonde.config.showafc},
{"freqofs", "RX frequency offset (Hz)", 0, &sonde.config.freqofs},
{"---", "---", -1, NULL},
/* APRS settings */
{"call", "Call", 8, sonde.config.call},
{"passcode", "Passcode", 8, sonde.config.passcode},
{"---", "---", -1, NULL},
/* AXUDP settings */
{"axudp.active", "AXUDP active", -3, &sonde.config.udpfeed.active},
{"axudp.host", "AXUDP Host", 63, sonde.config.udpfeed.host},
{"axudp.port", "AXUDP Port", 0, &sonde.config.udpfeed.port},
{"axudp.idformat", "DFM ID Format", -2, &sonde.config.udpfeed.idformat},
{"axudp.highrate", "Rate limit", 0, &sonde.config.udpfeed.highrate},
{"---", "---", -1, NULL},
/* APRS TCP settings, current not used */
{"tcp.active", "APRS TCP active", -3, &sonde.config.tcpfeed.active},
{"tcp.host", "ARPS TCP Host", 63, sonde.config.tcpfeed.host},
{"tcp.port", "APRS TCP Port", 0, &sonde.config.tcpfeed.port},
{"tcp.idformat", "DFM ID Format", -2, &sonde.config.tcpfeed.idformat},
{"tcp.highrate", "Rate limit", 0, &sonde.config.tcpfeed.highrate},
{"---", "---", -1, NULL},
/* RS41 decoder settings */
{"rs41.agcbw", "RS41 AGC bandwidth", 0, &sonde.config.rs41.agcbw},
{"rs41.rxbw", "RS41 RX bandwidth", 0, &sonde.config.rs41.rxbw},
{"---", "---", -1, NULL},
/* Hardware dependeing settings */
{"oled_sda", "OLED SDA (needs reboot)", 0, &sonde.config.oled_sda},
{"oled_scl", "OLED SCL (needs reboot)", 0, &sonde.config.oled_scl},
{"oled_rst", "OLED RST (needs reboot)", 0, &sonde.config.oled_rst},
{"button_pin", "Button input port (needs reboot)", 0, &sonde.config.button_pin},
{"led_pout", "LED output port (needs reboot)", 0, &sonde.config.led_pout},
};
const static int N_CONFIG = (sizeof(config_list) / sizeof(struct st_configitems));
void addConfigStringEntry(char *ptr, int idx, const char *label, int len, char *field) {
sprintf(ptr + strlen(ptr), "<tr><td>%s</td><td><input name=\"CFG%d\" type=\"text\" value=\"%s\"/></td></tr>\n",
label, idx, field);
}
void addConfigNumEntry(char *ptr, int idx, const char *label, int *value) {
sprintf(ptr + strlen(ptr), "<tr><td>%s</td><td><input name=\"CFG%d\" type=\"text\" value=\"%d\"/></td></tr>\n",
label, idx, *value);
}
void addConfigTypeEntry(char *ptr, int idx, const char *label, int *value) {
// TODO
}
void addConfigOnOffEntry(char *ptr, int idx, const char *label, int *value) {
// TODO
}
void addConfigSeparatorEntry(char *ptr) {
strcat(ptr, "<tr><td colspan=\"2\" class=\"divider\"><hr /></td></tr>\n");
}
const char *createConfigForm() {
char *ptr = message;
char tmp[4];
strcpy(ptr, "<html><head><link rel=\"stylesheet\" type=\"text/css\" href=\"style.css\"></head><body><form action=\"config.html\" method=\"post\"><table><tr><th>Option</th><th>Value</th></tr>");
for (int i = 0; i < N_CONFIG; i++) {
switch (config_list[i].type) {
case -3: // in/offt
addConfigOnOffEntry(ptr, i, config_list[i].label, (int *)config_list[i].data);
break;
case -2: // DFM format
addConfigTypeEntry(ptr, i, config_list[i].label, (int *)config_list[i].data);
break;
case -1:
addConfigSeparatorEntry(ptr);
break;
case 0:
addConfigNumEntry(ptr, i, config_list[i].label, (int *)config_list[i].data);
break;
default:
addConfigStringEntry(ptr, i, config_list[i].label, config_list[i].type, (char *)config_list[i].data);
break;
}
}
strcat(ptr, "</table><input type=\"submit\" value=\"Update\"></input></form></body></html>");
return message;
}
const char *handleConfigPost(AsyncWebServerRequest *request) {
char label[10];
// parameters: a_i, f_1, t_i (active/frequency/type)
#if 1
File f = SPIFFS.open("/config.txt", "w");
if (!f) {
Serial.println("Error while opening '/config.txt' for writing");
return "Error while opening '/config.txt' for writing";
}
#endif
Serial.println("Handling post request");
#if 1
int params = request->params();
for (int i = 0; i < params; i++) {
String param = request->getParam(i)->name();
Serial.println(param.c_str());
}
#endif
for (int i = 0; i < params; i++) {
String strlabel = request->getParam(i)->name();
const char *label = strlabel.c_str();
if (strncmp(label, "CFG", 3) != 0) continue;
int idx = atoi(label + 3);
Serial.printf("idx is %d\n", idx);
if (config_list[idx].type == -1) continue; // skip separator entries, should not happen
AsyncWebParameter *value = request->getParam(label, true);
if (!value) continue;
String strvalue = value->value();
Serial.printf("Processing %s=%s\n", config_list[idx].name, strvalue.c_str());
f.printf("%s=%s\n", config_list[idx].name, strvalue.c_str());
}
f.close();
setupConfigData();
}
const char *ctrlid[] = {"rx", "scan", "spec", "wifi"};
const char *ctrllabel[] = {"Receiver (short keypress)", "Scanner (double keypress)", "Spectrum (medium keypress)", "WiFi (long keypress)"};
const char *createControlForm() {
char *ptr = message;
char tmp[4];
strcpy(ptr, "<html><head><link rel=\"stylesheet\" type=\"text/css\" href=\"style.css\"></head><body><form action=\"control.html\" method=\"post\">");
for (int i = 0; i < 4; i++) {
strcat(ptr, "<input type=\"submit\" name=\"");
strcat(ptr, ctrlid[i]);
strcat(ptr, "\" value=\"");
strcat(ptr, ctrllabel[i]);
strcat(ptr, "\"></input><br>");
}
strcat(ptr, "</form></body></html>");
return message;
}
const char *handleControlPost(AsyncWebServerRequest *request) {
Serial.println("Handling post request");
int params = request->params();
for (int i = 0; i < params; i++) {
String param = request->getParam(i)->name();
Serial.println(param.c_str());
if (param.equals("rx")) {
Serial.println("equals rx");
button1.pressed = KP_SHORT;
}
else if (param.equals("scan")) {
Serial.println("equals scan");
button1.pressed = KP_DOUBLE;
}
else if (param.equals("spec")) {
Serial.println("equals spec");
button1.pressed = KP_MID;
}
else if (param.equals("wifi")) {
Serial.println("equals wifi");
button1.pressed = KP_LONG;
}
}
}
// bad idea. prone to buffer overflow. use at your own risk...
const char *createEditForm(String filename) {
char *ptr = message;
File file = SPIFFS.open("/" + filename, "r");
if (!file) {
Serial.println("There was an error opening the file '/config.txt' for reading");
return "<html><head><title>File not found</title></head><body>File not found</body></html>";
}
strcpy(ptr, "<html><head><title>Editor ");
strcat(ptr, filename.c_str());
strcat(ptr, "</title></head><body><form action=\"edit.html?file=");
strcat(ptr, filename.c_str());
strcat(ptr, "\" method=\"post\">");
strcat(ptr, "<textarea name=\"text\" cols=\"80\" rows=\"40\">");
while (file.available()) {
String line = file.readStringUntil('\n');
strcat(ptr, line.c_str()); strcat(ptr, "\n");
}
strcat(ptr, "</textarea><input type=\"submit\">Save</input></form></body></html>");
return message;
}
const char *handleEditPost(AsyncWebServerRequest *request) {
Serial.println("Handling post request");
AsyncWebParameter *filep = request->getParam("file");
if(!filep) return NULL;
String filename = filep->value();
AsyncWebParameter *textp = request->getParam("text", true);
if(!textp) return NULL;
String content = textp->value();
File file = SPIFFS.open("/" + filename, "w");
if (!file) {
Serial.println("There was an error opening the file '/" + filename + "'for writing");
return "";
}
file.print(content);
file.close();
return "";
}
const char *createUpdateForm(boolean run) {
char *ptr = message;
char tmp[4];
strcpy(ptr, "<html><head><link rel=\"stylesheet\" type=\"text/css\" href=\"style.css\"></head><body><form action=\"update.html\" method=\"post\">");
if (run) {
strcat(ptr, "<p>Doing update, wait until reboot</p>");
} else {
strcat(ptr, "<input type=\"submit\" name=\"master\" value=\"Master-Update\"></input><br><input type=\"submit\" name=\"devel\" value=\"Devel-Update\">");
}
strcat(ptr, "</form></body></html>");
return message;
}
const char *handleUpdatePost(AsyncWebServerRequest *request) {
Serial.println("Handling post request");
int params = request->params();
for (int i = 0; i < params; i++) {
String param = request->getParam(i)->name();
Serial.println(param.c_str());
if (param.equals("devel")) {
Serial.println("equals devel");
updateBin = &updateBinD;
}
else if (param.equals("master")) {
Serial.println("equals master");
updateBin = &updateBinM;
}
}
Serial.println("Updating: " + *updateBin);
enterMode(ST_UPDATE);
}
const char* PARAM_MESSAGE = "message";
void SetupAsyncServer() {
server.reset();
// Route for root / web page
server.on("/", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(SPIFFS, "/index.html", String(), false, processor);
});
server.on("/index.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(SPIFFS, "/index.html", String(), false, processor);
});
server.on("/test.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(SPIFFS, "/test.html", String(), false, processor);
});
server.on("/qrg.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(200, "text/html", createQRGForm());
});
server.on("/qrg.html", HTTP_POST, [](AsyncWebServerRequest * request) {
handleQRGPost(request);
request->send(200, "text/html", createQRGForm());
});
server.on("/wifi.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(200, "text/html", createWIFIForm());
});
server.on("/wifi.html", HTTP_POST, [](AsyncWebServerRequest * request) {
handleWIFIPost(request);
request->send(200, "text/html", createWIFIForm());
});
server.on("/config.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(200, "text/html", createConfigForm());
});
server.on("/config.html", HTTP_POST, [](AsyncWebServerRequest * request) {
handleConfigPost(request);
request->send(200, "text/html", createConfigForm());
});
server.on("/status.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(200, "text/html", createStatusForm());
});
server.on("/update.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(200, "text/html", createUpdateForm(0));
});
server.on("/update.html", HTTP_POST, [](AsyncWebServerRequest * request) {
handleUpdatePost(request);
request->send(200, "text/html", createUpdateForm(1));
});
server.on("/control.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(200, "text/html", createControlForm());
});
server.on("/control.html", HTTP_POST, [](AsyncWebServerRequest * request) {
handleControlPost(request);
request->send(200, "text/html", createControlForm());
});
server.on("/edit.html", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(200, "text/html", createEditForm(request->getParam(0)->value()));
});
server.on("/edit.html", HTTP_POST, [](AsyncWebServerRequest * request) {
handleEditPost(request);
request->send(200, "text/html", createEditForm(request->getParam(0)->value()));
});
// Route to load style.css file
server.on("/style.css", HTTP_GET, [](AsyncWebServerRequest * request) {
request->send(SPIFFS, "/style.css", "text/css");
});
// Route to set GPIO to HIGH
server.on("/test.php", HTTP_POST, [](AsyncWebServerRequest * request) {
//digitalWrite(ledPin, HIGH);
request->send(SPIFFS, "/index.html", String(), false, processor);
});
// Start server
server.begin();
}
int fetchWifiIndex(const char *id) {
for (int i = 0; i < nNetworks; i++) {
if (strcmp(id, networks[i].id.c_str()) == 0) {
Serial.printf("Match for %s at %d\n", id, i);
return i;
}
Serial.printf("No match: '%s' vs '%s'\n", id, networks[i].id.c_str());
const char *cfgid = networks[i].id.c_str();
int len = strlen(cfgid);
if (strlen(id) > len) len = strlen(id);
Serial.print("SSID: ");
for (int i = 0; i < len; i++) {
Serial.printf("%02x ", id[i]);
} Serial.println("");
Serial.print("Conf: ");
for (int i = 0; i < len; i++) {
Serial.printf("%02x ", cfgid[i]);
} Serial.println("");
}
return -1;
}
const char *fetchWifiSSID(int i) {
return networks[i].id.c_str();
}
const char *fetchWifiPw(int i) {
return networks[i].pw.c_str();
}
const char *fetchWifiPw(const char *id) {
for (int i = 0; i < nNetworks; i++) {
//Serial.print("Comparing '");
//Serial.print(id);
//Serial.print("' and '");
//Serial.print(networks[i].id.c_str());
//Serial.println("'");
if (strcmp(id, networks[i].id.c_str()) == 0) return networks[i].pw.c_str();
}
return NULL;
}
static bool isTouched = false;
long touchTime = 0;
hw_timer_t * timer = NULL;
void checkTouchStatus();
void touchISR();
void initTouch() {
#if 1
timer = timerBegin(0, 80, true);
timerAttachInterrupt(timer, checkTouchStatus, true);
timerAlarmWrite(timer, 300000, true);
timerAlarmEnable(timer);
touchAttachInterrupt(T4, touchISR, 20);
#endif
}
void IRAM_ATTR touchISR() {
if (!isTouched) {
touchTime = millis();
isTouched = true;
}
}
void IRAM_ATTR checkTouchStatus() {
if (isTouched) {
if (touchRead(T4) > 60) {
isTouched = false;
// simulate key press
button1.pressed = KP_SHORT;
} else {
if (millis() - touchTime > 3000) {
// long touch
// ginore for now
}
}
}
}
void IRAM_ATTR buttonISR() {
if (digitalRead(button1.pin) == 0) { // Button down
if (millis() - button1.press_ts < 500) {
// Double press
button1.doublepress = true;
} else {
button1.doublepress = false;
}
button1.press_ts = millis();
} else { //Button up
unsigned int elapsed = millis() - button1.press_ts;
if (elapsed > 1500) {
if (elapsed < 4000) {
button1.pressed = KP_MID;
}
else {
button1.pressed = KP_LONG;
}
} else {
if (button1.doublepress) button1.pressed = KP_DOUBLE;
else button1.pressed = KP_SHORT;
}
button1.numberKeyPresses += 1;
button1.press_ts = millis();
}
}
int getKeyPress() {
KeyPress p = button1.pressed;
button1.pressed = KP_NONE;
return p;
}
int hasKeyPress() {
return button1.pressed;
}
void setup()
{
char buf[12];
// Open serial communications and wait for port to open:
Serial.begin(115200);
for (int i = 0; i < 39; i++) {
int v = gpio_get_level((gpio_num_t)i);
Serial.printf("%d:%d ", i, v);
}
Serial.println("");
pinMode(LORA_LED, OUTPUT);
initTouch();
aprs_gencrctab();
// Initialize SPIFFS
if (!SPIFFS.begin(true)) {
Serial.println("An Error has occurred while mounting SPIFFS");
return;
}
setupConfigData(); // configuration must be read first due to OLED ports!!!
LORA_LED = sonde.config.led_pout;
u8x8 = new U8X8_SSD1306_128X64_NONAME_SW_I2C(/* clock=*/ sonde.config.oled_scl, /* data=*/ sonde.config.oled_sda, /* reset=*/ sonde.config.oled_rst); // Unbuffered, basic graphics, software I2C
u8x8->begin();
delay(100);
u8x8->clear();
u8x8->setFont(u8x8_font_7x14_1x2_r);
u8x8->drawString(8 - strlen(version_name) / 2, 1, version_name);
u8x8->drawString(8 - strlen(version_id) / 2, 3, version_id);
u8x8->setFont(u8x8_font_chroma48medium8_r);
u8x8->drawString(0, 5, "by Hansi, DL9RDZ");
u8x8->drawString(1, 6, "Mods by DL2MF");
delay(3000);
sonde.clearDisplay();
setupWifiList();
button1.pin = sonde.config.button_pin;
pinMode(button1.pin, INPUT);
// == show initial values from config.txt ========================= //
if (sonde.config.debug == 1) {
u8x8->setFont(u8x8_font_chroma48medium8_r);
u8x8->drawString(0, 0, "Config:");
delay(500);
itoa(sonde.config.oled_sda, buf, 10);
u8x8->drawString(0, 1, " SDA:");
u8x8->drawString(6, 1, buf);
delay(500);
itoa(sonde.config.oled_scl, buf, 10);
u8x8->drawString(0, 2, " SCL:");
u8x8->drawString(6, 2, buf);
delay(500);
itoa(sonde.config.oled_rst, buf, 10);
u8x8->drawString(0, 3, " RST:");
u8x8->drawString(6, 3, buf);
delay(1000);
itoa(sonde.config.led_pout, buf, 10);
u8x8->drawString(0, 4, " LED:");
u8x8->drawString(6, 4, buf);
delay(500);
itoa(sonde.config.spectrum, buf, 10);
u8x8->drawString(0, 5, " SPEC:");
u8x8->drawString(6, 5, buf);
delay(500);
itoa(sonde.config.maxsonde, buf, 10);
u8x8->drawString(0, 6, " MAX:");
u8x8->drawString(6, 6, buf);
delay(5000);
sonde.clearDisplay();
}
// == show initial values from config.txt ========================= //
#if 0
// == check the radio chip by setting default frequency =========== //
if (rs41.setFrequency(402700000) == 0) {
Serial.println(F("Setting freq: SUCCESS "));
} else {
Serial.println(F("Setting freq: ERROR "));
}
float f = sx1278.getFrequency();
Serial.print("Frequency set to ");
Serial.println(f);
// == check the radio chip by setting default frequency =========== //
#endif
//sx1278.setLNAGain(-48);
sx1278.setLNAGain(0);
int gain = sx1278.getLNAGain();
Serial.print("RX LNA Gain is ");
Serial.println(gain);
// Print a success message
Serial.println(F("SX1278 configuration finished"));
Serial.println("Setup finished");
Serial.println();
// int returnValue = pthread_create(&wifithread, NULL, wifiloop, (void *)0);
// if (returnValue) {
// Serial.println("An error has occurred");
// }
// xTaskCreate(mainloop, "MainServer", 10240, NULL, 10, NULL);
// Handle button press
attachInterrupt(button1.pin, buttonISR, CHANGE);
// == setup default channel list if qrg.txt read fails =========== //
setupChannelList();
#if 0
sonde.clearSonde();
sonde.addSonde(402.700, STYPE_RS41);
sonde.addSonde(405.700, STYPE_RS41);
sonde.addSonde(405.900, STYPE_RS41);
sonde.addSonde(403.450, STYPE_DFM09);
Serial.println("No channel config file, using defaults!");
Serial.println();
#endif
/// not here, done by sonde.setup(): rs41.setup();
// == setup default channel list if qrg.txt read fails =========== //
sonde.setup();
WiFi.onEvent(WiFiEvent);
}
void enterMode(int mode) {
mainState = (MainState)mode;
if (mainState == ST_SPECTRUM) {
sonde.clearDisplay();
u8x8->setFont(u8x8_font_chroma48medium8_r);
specTimer = millis();
}
sonde.clearDisplay();
}
void loopDecoder() {
switch (getKeyPress()) {
case KP_SHORT:
sonde.nextConfig();
sonde.updateDisplayRXConfig();
sonde.updateDisplay();
break;
case KP_DOUBLE:
enterMode(ST_SCANNER);
return;
case KP_MID:
enterMode(ST_SPECTRUM);
return;
case KP_LONG:
enterMode(ST_WIFISCAN);
return;
}
// sonde knows the current type and frequency, and delegates to the right decoder
int res = sonde.receiveFrame();
if (res == 0 && connected) {
//Send a packet with position information
// first check if ID and position lat+lonis ok
if (sonde.si()->validID && (sonde.si()->validPos & 0x03 == 0x03)) {
Serial.println("Sending position via UDP");
SondeInfo *s = sonde.si();
char raw[201];
const char *str = aprs_senddata(s->lat, s->lon, s->alt, s->hs, s->dir, s->vs, sondeTypeStr[s->type], s->id, "TE0ST",
sonde.config.udpfeed.symbol);
int rawlen = aprsstr_mon2raw(str, raw, APRS_MAXLEN);
Serial.print("Sending: "); Serial.println(raw);
udp.beginPacket(sonde.config.udpfeed.host, sonde.config.udpfeed.port);
udp.write((const uint8_t *)raw, rawlen);
udp.endPacket();
}
}
sonde.updateDisplay();
}
#define SCAN_MAXTRIES 1
void loopScanner() {
sonde.updateDisplayScanner();
static int tries = 0;
switch (getKeyPress()) {
case KP_SHORT:
enterMode(ST_DECODER);
return;
case KP_DOUBLE: break; /* ignored */
case KP_MID:
enterMode(ST_SPECTRUM);
return;
case KP_LONG:
enterMode(ST_WIFISCAN);
return;
}
// receiveFrame returns 0 on success, 1 on timeout
int res = sonde.receiveFrame(); // Maybe instead of receiveFrame, just detect if right type is present? TODO
Serial.print("Scanner: receiveFrame returned: ");
Serial.println(res);
if (res == 0) {
enterMode(ST_DECODER);
return;
}
if (++tries >= SCAN_MAXTRIES && !hasKeyPress()) {
sonde.nextConfig();
tries = 0;
}
}
void loopSpectrum() {
int marker = 0;
char buf[10];
switch (getKeyPress()) {
case KP_SHORT: /* move selection of peak, TODO */
sonde.nextConfig(); // TODO: Should be set specific frequency
enterMode(ST_DECODER);
return;
case KP_MID: /* restart, TODO */ break;
case KP_LONG:
enterMode(ST_WIFISCAN);
return;
case KP_DOUBLE:
enterMode(ST_SCANNER);
break;
default: break;
}
scanner.scan();
scanner.plotResult();
if (sonde.config.marker != 0) {
itoa((sonde.config.startfreq), buf, 10);
u8x8->drawString(0, 1, buf);
u8x8->drawString(7, 1, "MHz");
itoa((sonde.config.startfreq + 6), buf, 10);
u8x8->drawString(13, 1, buf);
}
if (sonde.config.timer) {
int remaining = sonde.config.spectrum - (millis() - specTimer) / 1000;
itoa(remaining, buf, 10);
Serial.printf("timer:%d config.spectrum:%d specTimer:%ld millis:%ld remaining:%d\n", sonde.config.timer, sonde.config.spectrum, specTimer, millis(), remaining);
if (sonde.config.marker != 0) {
marker = 1;
}
u8x8->drawString(0, 1 + marker, buf);
u8x8->drawString(2, 1 + marker, "Sec.");
if (remaining <= 0) {
enterMode(ST_SCANNER);
}
}
}
void startSpectrumDisplay() {
sonde.clearDisplay();
u8x8->setFont(u8x8_font_chroma48medium8_r);
u8x8->drawString(0, 0, "Spectrum Scan...");
delay(500);
enterMode(ST_SPECTRUM);
}
String translateEncryptionType(wifi_auth_mode_t encryptionType) {
switch (encryptionType) {
case (WIFI_AUTH_OPEN):
return "Open";
case (WIFI_AUTH_WEP):
return "WEP";
case (WIFI_AUTH_WPA_PSK):
return "WPA_PSK";
case (WIFI_AUTH_WPA2_PSK):
return "WPA2_PSK";
case (WIFI_AUTH_WPA_WPA2_PSK):
return "WPA_WPA2_PSK";
case (WIFI_AUTH_WPA2_ENTERPRISE):
return "WPA2_ENTERPRISE";
}
}
void enableNetwork(bool enable) {
if (enable) {
MDNS.begin("rdzsonde");
SetupAsyncServer();
udp.begin(WiFi.localIP(), LOCALUDPPORT);
MDNS.addService("http", "tcp", 80);
connected = true;
} else {
MDNS.end();
connected = false;
}
}
enum t_wifi_state { WIFI_DISABLED, WIFI_SCAN, WIFI_CONNECT, WIFI_CONNECTED, WIFI_APMODE };
static t_wifi_state wifi_state = WIFI_DISABLED;
// Events used only for debug output right now
void WiFiEvent(WiFiEvent_t event)
{
Serial.printf("[WiFi-event] event: %d\n", event);
switch (event) {
case SYSTEM_EVENT_WIFI_READY:
Serial.println("WiFi interface ready");
break;
case SYSTEM_EVENT_SCAN_DONE:
Serial.println("Completed scan for access points");
break;
case SYSTEM_EVENT_STA_START:
Serial.println("WiFi client started");
break;
case SYSTEM_EVENT_STA_STOP:
Serial.println("WiFi clients stopped");
break;
case SYSTEM_EVENT_STA_CONNECTED:
Serial.println("Connected to access point");
break;
case SYSTEM_EVENT_STA_DISCONNECTED:
Serial.println("Disconnected from WiFi access point");
if (wifi_state == WIFI_CONNECT) {
// If we get a disconnect event while waiting for connection (as I do sometimes with my FritzBox),
// just start from scratch with WiFi scan
wifi_state = WIFI_DISABLED;
WiFi.disconnect(true);
}
break;
case SYSTEM_EVENT_STA_AUTHMODE_CHANGE:
Serial.println("Authentication mode of access point has changed");
break;
case SYSTEM_EVENT_STA_GOT_IP:
Serial.print("Obtained IP address: ");
Serial.println(WiFi.localIP());
break;
case SYSTEM_EVENT_STA_LOST_IP:
Serial.println("Lost IP address and IP address is reset to 0");
break;
case SYSTEM_EVENT_STA_WPS_ER_SUCCESS:
Serial.println("WiFi Protected Setup (WPS): succeeded in enrollee mode");
break;
case SYSTEM_EVENT_STA_WPS_ER_FAILED:
Serial.println("WiFi Protected Setup (WPS): failed in enrollee mode");
break;
case SYSTEM_EVENT_STA_WPS_ER_TIMEOUT:
Serial.println("WiFi Protected Setup (WPS): timeout in enrollee mode");
break;
case SYSTEM_EVENT_STA_WPS_ER_PIN:
Serial.println("WiFi Protected Setup (WPS): pin code in enrollee mode");
break;
case SYSTEM_EVENT_AP_START:
Serial.println("WiFi access point started");
break;
case SYSTEM_EVENT_AP_STOP:
Serial.println("WiFi access point stopped");
break;
case SYSTEM_EVENT_AP_STACONNECTED:
Serial.println("Client connected");
break;
case SYSTEM_EVENT_AP_STADISCONNECTED:
Serial.println("Client disconnected");
break;
case SYSTEM_EVENT_AP_STAIPASSIGNED:
Serial.println("Assigned IP address to client");
break;
case SYSTEM_EVENT_AP_PROBEREQRECVED:
Serial.println("Received probe request");
break;
case SYSTEM_EVENT_GOT_IP6:
Serial.println("IPv6 is preferred");
break;
case SYSTEM_EVENT_ETH_START:
Serial.println("Ethernet started");
break;
case SYSTEM_EVENT_ETH_STOP:
Serial.println("Ethernet stopped");
break;
case SYSTEM_EVENT_ETH_CONNECTED:
Serial.println("Ethernet connected");
break;
case SYSTEM_EVENT_ETH_DISCONNECTED:
Serial.println("Ethernet disconnected");
break;
case SYSTEM_EVENT_ETH_GOT_IP:
Serial.println("Obtained IP address");
break;
}
}
int wifiConnect(int16_t res) {
Serial.printf("WLAN scan result: found %d networks\n", res);
// pick best network
int bestEntry = -1;
int bestRSSI = INT_MIN;
uint8_t bestBSSID[6];
int32_t bestChannel = 0;
for (int8_t i = 0; i < res; i++) {
String ssid_scan;
int32_t rssi_scan;
uint8_t sec_scan;
uint8_t* BSSID_scan;
int32_t chan_scan;
WiFi.getNetworkInfo(i, ssid_scan, sec_scan, rssi_scan, BSSID_scan, chan_scan);
int networkEntry = fetchWifiIndex(ssid_scan.c_str());
if (networkEntry < 0) continue;
if (rssi_scan <= bestRSSI) continue;
bestEntry = networkEntry;
bestRSSI = rssi_scan;
bestChannel = chan_scan;
memcpy((void*) &bestBSSID, (void*) BSSID_scan, sizeof(bestBSSID));
}
WiFi.scanDelete();
if (bestEntry >= 0) {
Serial.printf("WiFi Connecting BSSID: %02X:%02X:%02X:%02X:%02X:%02X SSID: %s PW %s Channel: %d (RSSI %d)\n", bestBSSID[0], bestBSSID[1], bestBSSID[2], bestBSSID[3], bestBSSID[4], bestBSSID[5], fetchWifiSSID(bestEntry), fetchWifiPw(bestEntry), bestChannel, bestRSSI);
WiFi.begin(fetchWifiSSID(bestEntry), fetchWifiPw(bestEntry), bestChannel, bestBSSID);
wifi_state = WIFI_CONNECT;
} else {
// rescan
// wifiStart();
WiFi.disconnect(true);
wifi_state = WIFI_DISABLED;
}
}
static int wifi_cto;
void loopWifiBackground() {
Serial.printf("WifiBackground: state %d\n", wifi_state);
// handle Wifi station mode in background
if (sonde.config.wifi == 0 || sonde.config.wifi == 2) return; // nothing to do if disabled or access point mode
if (wifi_state == WIFI_DISABLED) { // stopped => start can
wifi_state = WIFI_SCAN;
Serial.println("WLAN start scan");
WiFi.scanNetworks(true); // scan in async mode
} else if (wifi_state == WIFI_SCAN) {
int16_t res = WiFi.scanComplete();
if (res == 0 || res == WIFI_SCAN_FAILED) {
// retry
Serial.println("WLAN restart scan");
WiFi.disconnect(true);
wifi_state = WIFI_DISABLED;
return;
}
if (res == WIFI_SCAN_RUNNING) {
return;
}
// Scan finished, try to connect
wifiConnect(res);
wifi_cto = 0;
} else if (wifi_state == WIFI_CONNECT) {
wifi_cto++;
if (WiFi.isConnected()) {
wifi_state = WIFI_CONNECTED;
// update IP in display
String localIPstr = WiFi.localIP().toString();
sonde.setIP(localIPstr.c_str(), false);
sonde.updateDisplayIP();
enableNetwork(true);
}
if (wifi_cto > 20) { // failed, restart scanning
wifi_state = WIFI_DISABLED;
WiFi.disconnect(true);
}
} else if (wifi_state == WIFI_CONNECTED) {
if (!WiFi.isConnected()) {
sonde.clearIP();
sonde.updateDisplayIP();
wifi_state = WIFI_DISABLED; // restart scan
enableNetwork(false);
WiFi.disconnect(true);
}
}
}
void startAP() {
Serial.println("Activating access point mode");
wifi_state = WIFI_APMODE;
WiFi.softAP(networks[0].id.c_str(), networks[0].pw.c_str());
IPAddress myIP = WiFi.softAPIP();
String myIPstr = myIP.toString();
sonde.setIP(myIPstr.c_str(), true);
sonde.updateDisplayIP();
SetupAsyncServer();
}
void initialMode() {
if (sonde.config.spectrum != 0) { // enable Spectrum in config.txt: spectrum=number_of_seconds
startSpectrumDisplay();
//done in startSpectrumScan(): enterMode(ST_SPECTRUM);
} else {
enterMode(ST_SCANNER);
}
}
// Wifi modes
// 0: disabled. directly start initial mode (spectrum or scanner)
// 1: station mode in background. directly start initial mode (spectrum or scanner)
// 2: access point mode in background. directly start initial mode (spectrum or scanner)
// 3: traditional sync. WifiScan. Tries to connect to a network, in case of failure activates AP.
// Mode 3 shows more debug information on serial port and display.
#define MAXWIFIDELAY 20
static const char* _scan[2] = {"/", "\\"};
void loopWifiScan() {
if (sonde.config.wifi == 0) { // no Wifi
wifi_state = WIFI_DISABLED;
initialMode();
return;
}
if (sonde.config.wifi == 1) { // station mode, setup in background
wifi_state = WIFI_DISABLED; // will start scanning in wifiLoopBackgroiund
initialMode();
return;
}
if (sonde.config.wifi == 2) { // AP mode, setup in background
startAP();
initialMode();
return;
}
// wifi==3 => original mode with non-async wifi setup
u8x8->setFont(u8x8_font_chroma48medium8_r);
u8x8->drawString(0, 0, "WiFi Scan...");
int line = 0;
int cnt = 0;
int marker = 0;
char buf[5];
WiFi.disconnect(true);
WiFi.mode(WIFI_STA);
int index = -1;
int n = WiFi.scanNetworks();
for (int i = 0; i < n; i++) {
Serial.print("Network name: ");
String ssid = WiFi.SSID(i);
Serial.println(ssid);
u8x8->drawString(0, 1 + line, ssid.c_str());
line = (line + 1) % 5;
Serial.print("Signal strength: ");
Serial.println(WiFi.RSSI(i));
Serial.print("MAC address: ");
Serial.println(WiFi.BSSIDstr(i));
Serial.print("Encryption type: ");
String encryptionTypeDescription = translateEncryptionType(WiFi.encryptionType(i));
Serial.println(encryptionTypeDescription);
Serial.println("-----------------------");
int curidx = fetchWifiIndex(ssid.c_str());
if (curidx >= 0 && index == -1) {
index = curidx;
Serial.printf("Match found at scan entry %d, config network %d\n", i, index);
}
}
if (index >= 0) { // some network was found
Serial.print("Connecting to: "); Serial.print(fetchWifiSSID(index));
Serial.print(" with password "); Serial.println(fetchWifiPw(index));
u8x8->drawString(0, 6, "Conn:");
u8x8->drawString(6, 6, fetchWifiSSID(index));
WiFi.begin(fetchWifiSSID(index), fetchWifiPw(index));
while (WiFi.status() != WL_CONNECTED && cnt < MAXWIFIDELAY) {
delay(500);
Serial.print(".");
if (cnt == 5) {
// my FritzBox needs this for reconnecting
WiFi.disconnect(true);
delay(500);
WiFi.begin(fetchWifiSSID(index), fetchWifiPw(index));
Serial.print("Reconnecting to: "); Serial.print(fetchWifiSSID(index));
Serial.print(" with password "); Serial.println(fetchWifiPw(index));
delay(500);
}
u8x8->drawString(15, 7, _scan[cnt & 1]);
cnt++;
}
}
if (index < 0 || cnt >= MAXWIFIDELAY) { // no network found, or connect not successful
WiFi.disconnect(true);
delay(1000);
startAP();
IPAddress myIP = WiFi.softAPIP();
Serial.print("AP IP address: ");
Serial.println(myIP);
u8x8->drawString(0, 6, "AP: ");
u8x8->drawString(6, 6, networks[0].id.c_str());
delay(3000);
} else {
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
String localIPstr = WiFi.localIP().toString();
Serial.println(localIPstr);
sonde.setIP(localIPstr.c_str(), false);
sonde.updateDisplayIP();
wifi_state = WIFI_CONNECTED;
delay(3000);
}
enableNetwork(true);
initialMode();
if (sonde.config.spectrum != 0) { // enable Spectrum in config.txt: spectrum=number_of_seconds
//startSpectrumDisplay();
enterMode(ST_SPECTRUM);
} else {
enterMode(ST_SCANNER);
}
}
/// Testing OTA Updates
/// somewhat based on Arduino's AWS_S3_OTA_Update
// Utility to extract header value from headers
String getHeaderValue(String header, String headerName) {
return header.substring(strlen(headerName.c_str()));
}
// OTA Logic
void execOTA() {
int contentLength = 0;
bool isValidContentType = false;
sonde.clearDisplay();
u8x8->setFont(u8x8_font_chroma48medium8_r);
u8x8->drawString(0, 0, "C:");
String dispHost = updateHost.substring(0, 14);
u8x8->drawString(2, 0, dispHost.c_str());
Serial.println("Connecting to: " + updateHost);
// Connect to Update host
if (client.connect(updateHost.c_str(), updatePort)) {
// Connection succeeded, fecthing the bin
Serial.println("Fetching bin: " + String(*updateBin));
u8x8->drawString(0, 1, "Fetching update");
// Get the contents of the bin file
client.print(String("GET ") + *updateBin + " HTTP/1.1\r\n" +
"Host: " + updateHost + "\r\n" +
"Cache-Control: no-cache\r\n" +
"Connection: close\r\n\r\n");
// Check what is being sent
// Serial.print(String("GET ") + bin + " HTTP/1.1\r\n" +
// "Host: " + host + "\r\n" +
// "Cache-Control: no-cache\r\n" +
// "Connection: close\r\n\r\n");
unsigned long timeout = millis();
while (client.available() == 0) {
if (millis() - timeout > 5000) {
Serial.println("Client Timeout !");
client.stop();
return;
}
}
// Once the response is available,
// check stuff
/*
Response Structure
HTTP/1.1 200 OK
x-amz-id-2: NVKxnU1aIQMmpGKhSwpCBh8y2JPbak18QLIfE+OiUDOos+7UftZKjtCFqrwsGOZRN5Zee0jpTd0=
x-amz-request-id: 2D56B47560B764EC
Date: Wed, 14 Jun 2017 03:33:59 GMT
Last-Modified: Fri, 02 Jun 2017 14:50:11 GMT
ETag: "d2afebbaaebc38cd669ce36727152af9"
Accept-Ranges: bytes
Content-Type: application/octet-stream
Content-Length: 357280
Server: AmazonS3
{{BIN FILE CONTENTS}}
*/
while (client.available()) {
// read line till /n
String line = client.readStringUntil('\n');
// remove space, to check if the line is end of headers
line.trim();
// if the the line is empty,
// this is end of headers
// break the while and feed the
// remaining `client` to the
// Update.writeStream();
if (!line.length()) {
//headers ended
break; // and get the OTA started
}
// Check if the HTTP Response is 200
// else break and Exit Update
if (line.startsWith("HTTP/1.1")) {
if (line.indexOf("200") < 0) {
Serial.println("Got a non 200 status code from server. Exiting OTA Update.");
break;
}
}
// extract headers here
// Start with content length
if (line.startsWith("Content-Length: ")) {
contentLength = atoi((getHeaderValue(line, "Content-Length: ")).c_str());
Serial.println("Got " + String(contentLength) + " bytes from server");
}
// Next, the content type
if (line.startsWith("Content-Type: ")) {
String contentType = getHeaderValue(line, "Content-Type: ");
Serial.println("Got " + contentType + " payload.");
if (contentType == "application/octet-stream") {
isValidContentType = true;
}
}
}
} else {
// Connect to updateHost failed
// May be try?
// Probably a choppy network?
Serial.println("Connection to " + String(updateHost) + " failed. Please check your setup");
// retry??
// execOTA();
}
// Check what is the contentLength and if content type is `application/octet-stream`
Serial.println("contentLength : " + String(contentLength) + ", isValidContentType : " + String(isValidContentType));
u8x8->drawString(0, 2, "Len: ");
String cls = String(contentLength);
u8x8->drawString(5, 2, cls.c_str());
// check contentLength and content type
if (contentLength && isValidContentType) {
// Check if there is enough to OTA Update
bool canBegin = Update.begin(contentLength);
u8x8->drawString(0, 4, "Starting update");
// If yes, begin
if (canBegin) {
Serial.println("Begin OTA. This may take 2 - 5 mins to complete. Things might be quite for a while.. Patience!");
// No activity would appear on the Serial monitor
// So be patient. This may take 2 - 5mins to complete
u8x8->drawString(0, 5, "Please wait!");
size_t written = Update.writeStream(client);
if (written == contentLength) {
Serial.println("Written : " + String(written) + " successfully");
} else {
Serial.println("Written only : " + String(written) + "/" + String(contentLength) + ". Retry?" );
// retry??
// execOTA();
}
if (Update.end()) {
Serial.println("OTA done!");
if (Update.isFinished()) {
Serial.println("Update successfully completed. Rebooting.");
u8x8->drawString(0, 7, "Rebooting....");
delay(1000);
ESP.restart();
} else {
Serial.println("Update not finished? Something went wrong!");
}
} else {
Serial.println("Error Occurred. Error #: " + String(Update.getError()));
}
} else {
// not enough space to begin OTA
// Understand the partitions and
// space availability
Serial.println("Not enough space to begin OTA");
client.flush();
}
} else {
Serial.println("There was no content in the response");
client.flush();
}
// Back to some normal state
enterMode(ST_DECODER);
}
static int lastDisplay = 1;
void loop() {
Serial.print("Running main loop. free heap:");
Serial.println(ESP.getFreeHeap());
//Serial.println(touchRead(13));
//Serial.println(touchRead(4));
switch (mainState) {
case ST_DECODER: loopDecoder(); break;
case ST_SCANNER: loopScanner(); break;
case ST_SPECTRUM: loopSpectrum(); break;
case ST_WIFISCAN: loopWifiScan(); break;
case ST_UPDATE: execOTA(); break;
}
#if 1
int rssi = sx1278.getRSSI();
Serial.print(" RSSI: ");
Serial.print(rssi);
int gain = sx1278.getLNAGain();
Serial.print(" LNA Gain: "),
Serial.println(gain);
#endif
loopWifiBackground();
if (sonde.config.display != lastDisplay && (mainState == ST_DECODER)) {
sonde.clearDisplay();
sonde.updateDisplay();
lastDisplay = sonde.config.display;
}
}
Reference in New Issue View Git Blame Copy Permalink