ua1zbe
/
rpitx2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

just a theory

This commit is contained in:
Kuba 2023-11-21 21:38:35 +01:00 committed by GitHub
parent c2a5bbe1d6
commit 434a32e3a6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
README.md
View File

@ -49,9 +49,14 @@ sudo reboot
| Pi3B+|OK|
| Pi3A+|OK|
| Pi4|Partial (system may crash completly)|
| Pi400|Partial (system probably will crash completly)|
| Pi5|Unknown (open issue if you have an RPI 5)|
Plug a wire on GPIO 4, means Pin 7 of the GPIO header ([header P1](http://elinux.org/RPi_Low-level_peripherals#General_Purpose_Input.2FOutput_.28GPIO.29)). This acts as the antenna. The optimal length of the wire depends the frequency you want to transmit on, but it works with a few centimeters for local testing. (Use https://www.southwestantennas.com/calculator/antenna-wavelength to calculate the lenght, make sure to use the 1/4 wave setting, as for 1/2 wave you'd need a impedance transformator, and these are not cheap [also yes, i learned it the hard way after having to cut my antenna])
# Hardware (detailed compatibility
It definitly works on a RPI 3 A+, as im testing this program on it, ive used it on a pi 400, it sometimes works with no problem, but sometime it just crashes, possible cause can be this: "the rpi swtiches the gpio pin so fast it cant tell it states, for example if its 0.5 instead of high or low, whats next?" but, that just a theory, A ELECTRONIC THEORY
# How to use it
![easymenu](/doc/easymenu.png)
## Easytest