ua1zbe
/
rpitx2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update README.md

This commit is contained in:
Kuba 2023-10-30 19:14:12 +01:00 committed by GitHub
parent 2005117a2c
commit 43d2ca5e5a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 6 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
README.md
View File

@ -19,7 +19,7 @@ Be sure to have git package installed :
sudo apt-get update sudo apt-get update
sudo apt-get install git sudo apt-get install git
``` ```
You can now clone the repository. A script (install.sh) is there for easy installation. You could inspect it and make steps manualy in case of any doubt. You can note that /boot/config.txt should be prompt to be modified during the installation. If it is not accepted, **rpitx** will be unstable. You can now clone the repository. A script (install.sh) is there for easy installation. You could inspect it and make steps manualy in case of any doubt. You can note that /boot/config.txt should be prompt to be modified during the installation. If it is not accepted, **rpitx2** will be unstable.
```sh ```sh
git clone https://github.com/KubaPro010/rpitx2 git clone https://github.com/KubaPro010/rpitx2
@ -48,7 +48,7 @@ sudo reboot
| Pi3A+|OK| | Pi3A+|OK|
| Pi4|In beta mode| | Pi4|In beta mode|
Plug a wire on GPIO 4, means Pin 7 of the GPIO header ([header P1](http://elinux.org/RPi_Low-level_peripherals#General_Purpose_Input.2FOutput_.28GPIO.29)). This acts as the antenna. The optimal length of the wire depends the frequency you want to transmit on, but it works with a few centimeters for local testing. Plug a wire on GPIO 4, means Pin 7 of the GPIO header ([header P1](http://elinux.org/RPi_Low-level_peripherals#General_Purpose_Input.2FOutput_.28GPIO.29)). This acts as the antenna. The optimal length of the wire depends the frequency you want to transmit on, but it works with a few centimeters for local testing. (Use https://www.southwestantennas.com/calculator/antenna-wavelength to calculate the lenght, make sure to use the 1/4 wave setting, as for 1/2 wave you'd need a impedance transformator, and these are not cheap [also yes, i learned it the hard way after having to cut my antenna])
# How to use it # How to use it
![easymenu](/doc/easymenu.png) ![easymenu](/doc/easymenu.png)
@ -94,7 +94,7 @@ This is a picture transmission mode using audio modulation (USB mode). You need
### Pocsag (pager mode) ### ### Pocsag (pager mode) ###
![pocsag](/doc/pocsagrpitx.JPG) ![pocsag](/doc/pocsagrpitx.JPG)
This is a mode used by pagers. You need an extra software to decode. Set your SDR in NBFM mode. This is a mode used by pagers. You need an extra software to decode. Set your SDR in NFM mode.
### Freedv (digital voice) ### ### Freedv (digital voice) ###
![freedv](/doc/freedvrpitx.JPG) ![freedv](/doc/freedvrpitx.JPG)
@ -107,12 +107,12 @@ This a beacon mode which sound like Morse. You need opera in mode 0.5 to decode.
## Rpitx and low cost RTL-SDR dongle ## ## Rpitx and low cost RTL-SDR dongle ##
![rtlmenu](/doc/rlsdrmenu.png) ![rtlmenu](/doc/rlsdrmenu.png)
**rtlmenu** allows to use rtl-sdr receiver dongle and **rpitx** together. This combine receiver and transmission for experimenting. **rtlmenu** allows to use rtl-sdr receiver dongle and **rpitx2** together. This combine receiver and transmission for experimenting.
To launch it, go to rpitx folder and launch rtlmenu.sh : To launch it, go to rpitx folder and launch rtlmenu.sh :
```sh ```sh
./rtlmenu.sh ./rtlmenu.sh
``` ```
You have first to set receiver frequency and gain of rtl-sdr. Warning about gain, you should ensure that you have enough gain to receive the signal but not to strong which could saturate it and will not be usefull by **rpitx**. You have first to set receiver frequency and gain of rtl-sdr. Warning about gain, you should ensure that you have enough gain to receive the signal but not to strong which could saturate it and will not be usefull by **rpitx2**.
Choose your choice with arrows and enter to start it.**Don't forget, some test are made in loop, you have to press CTRL^C to exit and back to menu.** Choose your choice with arrows and enter to start it.**Don't forget, some test are made in loop, you have to press CTRL^C to exit and back to menu.**
@ -132,9 +132,8 @@ We assume that input frequency is tuned on FM station. It is demodulated and mod
# To continue # To continue
**rpitx** is a generic RF transmitter. There is a lot of modulation to do with it and also documentation to make all that easy to contribute. This will be the next step ! Feel free to inspect scripts, change parameters (frequencies, audio input, pictures...). **rpitx2** is a generic RF transmitter. There is a lot of modulation to do with it and also documentation to make all that easy to contribute. This will be the next step ! Feel free to inspect scripts, change parameters (frequencies, audio input, pictures...).
# Credits # Credits
All rights of the original authors reserved. All rights of the original authors reserved.
I try to include all licences and authors in sourcecode. Need to write all references in this section. I try to include all licences and authors in sourcecode. Need to write all references in this section.
# rpitx2