Merge branch 'sm0svx:master' into hotspot-nmea

src/async/core/AsyncTcpPrioClientBase.cpp

@@ -481,7 +481,7 @@ class TcpPrioClientBase::Machine
       : Async::StateBase<StateConnected, StateConnectedLowerPrio>
     {
       static constexpr auto NAME = "ConnectedLowerPrio";
-    }; /* StateConnecting */
+    }; /* StateConnectedLowerPrio */
 
 
     struct StateConnectedLowerPrioIdle

src/doc/man/devcal.1

@@ -54,10 +54,10 @@ neighbouring channels. The default value is 5000Hz.
 .BI "-H|--headroom=" "headroom in dB"
 The headroom is the margin to add above the maximum deviation level. Adding a
 headroom will allow SvxLink to handle levels above the maximum deviation level
-without causing immediate distorsion. The default is 6dB which mean that
+without causing immediate distortion. The default is 6dB which mean that
 SvxLink can handle twice the specified maximum deviation. If both maxdev and
 headroom are left at their default this will mean that SvxLink can handle 10kHz
-deviation without distorsion.
+deviation without distortion.
 
 Changing the headroom cause a lot of different effects so don't do that unless
 you are prepared to deal with the problems. For example, increasing the

src/svxlink/ChangeLog

@@ -1477,7 +1477,7 @@
   the input volume. It is enabled by setting the PEAK_METER variable in
   the receiver configuration section. Start SvxLink and open the squelch on
   the receiver so that only noise is available on the input. Adjust the input
-  volume until you see messages printed about distorsion. Then lower the
+  volume until you see messages printed about distortion. Then lower the
   volume until there are no more messages.
 
 * Now using libsigc++ version 1.2 instead of the old and outdated 1.0.

src/svxlink/svxlink/ReflectorLogic.tcl

@@ -39,6 +39,22 @@ if {$logic_name != [namespace tail [namespace current]]} {
 }
 
 
+#
+# A helper function for announcing a talkgroup.
+# If there is an audio clip matching the name talk_group-<tg> it will be played
+# instead of spelling the digits. Look at the documentation for playMsg for
+# more information on where to put the audio clip.
+#
+#   tg - The talkgroup to announce
+#
+proc say_talkgroup {tg} {
+  if [playMsg "Core" "talk_group-$tg" 0] {
+  } else {
+    spellNumber $tg
+  }
+}
+
+
 #
 # Executed when an unknown command is received
 #   cmd - The command string
@@ -69,11 +85,11 @@ proc report_tg_status {} {
     set prev_announce_time [clock seconds]
     set prev_announce_tg $selected_tg
     playMsg "Core" "talk_group"
-    spellNumber $selected_tg
+    say_talkgroup $selected_tg
   } else {
     playMsg "Core" "previous"
     playMsg "Core" "talk_group"
-    spellNumber $previous_tg
+    say_talkgroup $previous_tg
   }
 }
 
@@ -116,7 +132,7 @@ proc tg_local_activation {new_tg old_tg} {
     set prev_announce_tg $new_tg
     playSilence 100
     playMsg "Core" "talk_group"
-    spellNumber $new_tg
+    say_talkgroup $new_tg
   }
 }
 
@@ -143,7 +159,7 @@ proc tg_remote_activation {new_tg old_tg} {
     set prev_announce_tg $new_tg
     playSilence 100
     playMsg "Core" "talk_group"
-    spellNumber $new_tg
+    say_talkgroup $new_tg
   }
 }
 
@@ -175,7 +191,7 @@ proc tg_command_activation {new_tg old_tg} {
   set prev_announce_tg $new_tg
   playSilence 100
   playMsg "Core" "talk_group"
-  spellNumber $new_tg
+  say_talkgroup $new_tg
 }
 
 
@@ -195,7 +211,7 @@ proc tg_default_activation {new_tg old_tg} {
   #  set prev_announce_tg $new_tg
   #  playSilence 100
   #  playMsg "Core" "talk_group"
-  #  spellNumber $new_tg
+  #  say_talkgroup $new_tg
   #}
 }
 
@@ -216,7 +232,7 @@ proc tg_qsy {new_tg old_tg} {
   playSilence 100
   playMsg "Core" "qsy"
   #playMsg "Core" "talk_group"
-  spellNumber $new_tg
+  say_talkgroup $new_tg
 }
 
 
@@ -254,7 +270,7 @@ proc tg_qsy_failed {} {
 proc tg_qsy_pending {tg} {
   playSilence 100
   playMsg "Core" "qsy"
-  spellNumber $tg
+  say_talkgroup $tg
   playMsg "Core" "pending"
 }
 
@@ -269,7 +285,7 @@ proc tg_qsy_ignored {tg} {
   playSilence 100
   if {!$qsy_pending_active} {
     playMsg "Core" "qsy"
-    spellNumber $tg
+    say_talkgroup $tg
   }
   playMsg "Core" "ignored"
   playSilence 500
@@ -337,7 +353,7 @@ proc tmp_monitor_add {tg} {
   #puts "### tmp_monitor_add: $tg"
   playSilence 100
   playMsg "Core" "monitor"
-  spellNumber $tg
+  say_talkgroup $tg
 }
 
 

src/svxlink/svxlink/events.tcl

@@ -18,17 +18,43 @@
 # EchoLink, Help, Parrot etc. If a sound is not found in the specified context,
 # a search in the "Default" context is done.
 #
-proc playMsg {context msg} {
+# It's also possible to have local overrides by putting files under a "local"
+# directory either directly under the "sounds" directory or under the language
+# pack directory. For example if context is "Core" and the language is set to
+# "en_US" the following paths will be searched:
+#
+#   .../sounds/en_US/local/Core/
+#   .../sounds/local/Core/
+#   .../sounds/en_US/Core/
+#   .../sounds/en_US/local/Default/
+#   .../sounds/local/Default/
+#   .../sounds/en_US/Default/
+#
+#   context   - The context to look for the sound files in (e.g Default,
+#               Parrot etc).
+#   msg       - The basename of the file to play
+#   warn      - Set to 0 to not print a warning if no sound clip was found
+#
+proc playMsg {context msg {warn 1}} {
   global basedir
   global langdir
 
-  set candidates [glob -nocomplain "$langdir/$context/$msg.{wav,raw,gsm}" \
-                                   "$langdir/Default/$msg.{wav,raw,gsm}"];
-  if { [llength $candidates] > 0 } {
+  set candidates [glob -nocomplain \
+      "$langdir/local/$context/$msg.{wav,raw,gsm}" \
+      "$basedir/sounds/local/$context/$msg.{wav,raw,gsm}" \
+      "$langdir/$context/$msg.{wav,raw,gsm}" \
+      "$langdir/local/Default/$msg.{wav,raw,gsm}" \
+      "$basedir/sounds/local/Default/$msg.{wav,raw,gsm}" \
+      "$langdir/Default/$msg.{wav,raw,gsm}"];
+  if {[llength $candidates] > 0} {
     playFile [lindex $candidates 0];
   } else {
-    puts "*** WARNING: Could not find audio clip \"$msg\" in context \"$context\"";
+    if {$warn} {
+      puts "*** WARNING: Could not find audio clip \"$msg\" in context \"$context\"";
+    }
+    return 0
   }
+  return 1
 }
 
 

src/svxlink/trx/LocalRxBase.cpp

@@ -136,7 +136,7 @@ class PeakMeter : public AudioPassthrough
       if (i < ret)
       {
       	cout << name
-	     << ": Distorsion detected! Please lower the input volume!\n";
+	     << ": Distortion detected! Please lower the input volume!\n";
       }
       
       return ret;

src/svxlink/trx/RtlSdr.cpp

@@ -300,7 +300,7 @@ void RtlSdr::handleIq(const complex<uint8_t> *samples, int samp_count)
   {
     if (dist_print_cnt == static_cast<int>(samp_rate))
     {
-      cout << "*** WARNING: Distorsion detected on Rtl tuner "
+      cout << "*** WARNING: Distortion detected on Rtl tuner "
            << displayName() << ". Lower the RF gain\n";
     }
     dist_print_cnt -= samp_count;
@@ -423,7 +423,7 @@ int RtlSdr::dataReceived(Async::TcpConnection *con, void *buf, int count)
   {
     if (dist_print_cnt == static_cast<int>(samp_rate))
     {
-      cout << "*** WARNING: Distorsion detected on RtlSdr tuner "
+      cout << "*** WARNING: Distortion detected on RtlSdr tuner "
            << con->remoteHost() << ":" << con->remotePort() << ". "
            << "Lower the RF gain\n";
     }

src/svxlink/trx/RtlSdr.h

@@ -143,7 +143,7 @@ class RtlSdr : public sigc::trackable
     virtual ~RtlSdr(void);
   
     /**
-     * @brief 	Enable printing of distorsion warnings
+     * @brief 	Enable printing of distortion warnings
      * @param 	enable Set to \em true to enable printing
      */
     void enableDistPrint(bool enable);

src/versions

@@ -11,7 +11,7 @@ LIBECHOLIB=1.3.3.99.2
 LIBASYNC=1.6.99.22
 
 # SvxLink versions
-SVXLINK=1.7.99.68
+SVXLINK=1.7.99.69
 MODULE_HELP=1.0.0
 MODULE_PARROT=1.1.1
 MODULE_ECHO_LINK=1.5.99.3
@@ -25,13 +25,13 @@ MODULE_FRN=1.1.0
 MODULE_TRX=1.0.0
 
 # Version for the RemoteTrx application
-REMOTE_TRX=1.3.99.9
+REMOTE_TRX=1.3.99.10
 
 # Version for the signal level calibration utility
-SIGLEV_DET_CAL=1.0.7.99.5
+SIGLEV_DET_CAL=1.0.7.99.6
 
 # Version for the deviation calibration utility
-DEVCAL=1.0.2.99.6
+DEVCAL=1.0.2.99.7
 
 # Version for svxserver
 SVXSERVER=0.0.6