ua1zbe
/
aprsc
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aprsc/doc/CONFIGURATION.md

12 KiB
Raw Blame History

Configuring aprsc

Command line parameters and startup

aprsc understands a few command line parameters. On Ubuntu/Debian derived systems these go to /etc/default/aprsc, on Fedora they go to /etc/sysconfig/aprsc, and on other systems they go in the init script starting up the software. Shown here are the settings installed by default when installing aprsc from a binary package.

  • -u aprsc - switch to user 'aprsc' as soon as possible
  • -t /opt/aprsc - chroot to the given directory after starting
  • -f - fork to a daemon
  • -e info - log at level info (can be changed to "debug" for more verbose logging)
  • -o file - log to file (can be changed to "stderr" for supervisord and debugging, or "syslog" for syslogd)
  • -r logs - log file directory, log files are placed in /opt/aprsc/logs
  • -c etc/aprsc.conf - configuration file location

Since the daemon does a chroot to /opt/aprsc, all paths are relative to that directory and the daemon cannot access any files outside the chroot. The supplied startup script copies a couple of essential files from /etc to /opt/aprsc/etc so that DNS lookups work (hosts, resolv.conf, gai.conf, /nsswitch.conf).

aprsc refuses to run as root, but it should be started to root so that it can do the chroot() dance and adjust resource limits as needed. When started as root, it requires that the -u parameter is set to an unprivileged user. Right after the chroot() it switches to the specified user to reduce the damage potential. For security reasons it's a good idea to have a separate unprivileged user account for aprsc. The official binary aprsc packages automatically creates an "aprsc" user account and uses that in the configuration.

aprsc can log to syslog too, but that will require bringing the syslog socket within the chroot.

Configuration file format

Comment lines starting with the hash/number sign "#" are ignored.

String parameters containing spaces need to be enclosed in double quotes ("). Actually, any parameters may be enclosed in double quotes, but they are unnecessary unless there are spaces in the parameter.

C-style backslash escapes are supported. If a literal backslash (\) character needs to be entered within a parameter, it must be escaped with another backslash (\\). The source MarkDown file of this document contains double backslashes so that the correct amount of backslashes will be shown when the file is rendered as HTML.

Configuration file options in aprsc.conf

Basic server options

  • ServerId NOCALL

    This is your unique server ID. Typically contains a callsign and an SSID.

  • PassCode 0

    This is the passcode for your server ID.

  • MyAdmin "My Name, MYCALL"

    Your name and callsign.

  • MyEmail email@example.com

    This is an email address where you, the server operator, can be contacted. It is not displayed on the status web page, but it goes to the machine-readable status.json file, so persons skilled in the art can find a way to contact you.

  • LogRotate megabytes filecount

    If logging to a file (-o file), this option enables built-in log rotation. "LogRotate 10 5" keeps 5 old files of 10 megabytes each.

Timers and timeouts

Timer settings assume the time is specified in seconds, but allow appending one of s, m, h, d to multiply the given value by the number of seconds in a second, minute, hour and day respectively. Examples:

  • 600 - 600 seconds
  • 600s - 600 seconds
  • 5m - 5 minutes
  • 2h - 2 hours
  • 1h30m - 1 hours 30 minutes
  • 1d3h15m24s - you get it?

And here are the contestants:

  • UpstreamTimeout 15s

    When no data is received from an upstream server in N seconds, disconnect and switch to another server.

  • ClientTimeout 48h

    When no data is received from a downstream client in N seconds, disconnect.

Port listeners

The Listen directive tells aprsc to listen for connections from the network. The basic syntax is:

Listen socketname porttype protocol address port options...

  • socketname: any name you wish to show up in logs and statistics. Quote it if it contains spaces ("Full feed").

  • porttype: one of:

    • fullfeed - everything, after dupe filtering
    • igate - igate / client port with user-specified filters
    • udpsubmit - UDP packet submission port (8080)
    • dupefeed - duplicate packets dropped by the server

  • protocol: either tcp or udp

  • address: the local address to listen on. "::" for IPv6 IN6ADDR_ANY (all local IPv6 addresses), "0.0.0.0" for IPv4 INADDR_ANY (all local IPv4 addresses). On Linux and Solaris, just put "::" here and it will handle both IPv6 and IPv4 connections with a single configuration line! On FreeBSD, separate IPv4 and IPv6 listeners are needed.

  • port: the local TCP or UDP port to listen on.

  • options: one more of:

    • filter "m/500 t/m" - force a filter for users connected here. If you wish to specify multiple filters, put them in the same "string", separated by spaces.
    • maxclients 100 - limit clients connected on this port (defaults to 200)
    • acl etc/client.acl - match client addresses against ACL
    • hidden - don't show the port in the status page

If you wish to provide UDP service for clients, set up a second listener on the same address, port and address family (IPv4/IPv6).

Example of normal server ports for Linux, supporting both TCP and UDP, IPv4 and IPv6:

Listen "Full feed"                fullfeed  tcp ::  10152 hidden
Listen ""                         fullfeed  udp ::  10152 hidden

Listen "Client-Defined Filters"   igate     tcp ::  14580
Listen ""                         igate     udp ::  14580

Listen "350 km from my position"  fullfeed  tcp ::  20350 filter "m/350"
Listen ""                         fullfeed  udp ::  20350 filter "m/350"

Listen "UDP submit"               udpsubmit udp ::  8080

Uplink configuration

Uplink name type tcp address port

  • name: a name of the server or service you're connecting to
  • type: one of:
    • full - send a full feed to upstream
    • ro - read-only, do not transmit anything upstream

If you wish to specify multiple alternative servers, use multiple Uplink lines, one for each server. aprsc will automatically maintain a connection to one of them.

Normally a single line for the 'rotate' address is fine - it will connect to one of the servers in a random fashion and go for another one should the first one become unavailable.

Here's a good configuration for connecting to the APRS-IS core:

Uplink "Core rotate" full  tcp  rotate.aprs.net 10152

Binding source address when connecting upstream (optional)

If your server has multiple IP addresses and you need to use a specific source address when connecting to the upstream servers, the UplinkBind directive will make your day. If not, just leave it commented out.

If you're using both IPv4 and IPv6 to connect out, enter two UplinkBind directives, one with an IPv4 address and another with the IPv6 one.

UplinkBind 127.0.0.1
UplinkBind dead:beef::15:f00d

HTTP server

aprsc can listen for HTTP requests on one or multiple TCP ports. Each HTTP port responds to either status page queries, or takes in HTTP-based position uploads, but not both. HTTP listener configuration directioves take an IP address and a TCP port. Like the other Listeners, :: means "all addresses" for IPv6, 0.0.0.0 means "all addresses" for IPv4. On Linux, Solaris and OS X the :: IPv6 listener will also accept IPv4 connections happily, so you don't usually need a separate IPv4 listener.

If you don't have a global IPv6 address (/sbin/ifconfig -a will not show an IPv6 address with Scope:Global), using :: will not work, and you'll have to use 0.0.0.0. The libevent2 http server which does HTTP address configuration works like this.

The status page HTTP service is configured using HTTPStatus. Here's a configuration example for the APRS-IS standard status port 14501:

HTTPStatus 0.0.0.0 14501

The HTTP position upload service is configured using the HTTPUpload directive. Here's an example for the APRS-IS standard position submission port 8080:

HTTPUpload 0.0.0.0 8080

Multiple HTTPStatus and HTTPUpload directives can be entered to listen on multiple addresses or ports:

HTTPUpload 127.0.0.1 8080
HTTPUpload 10.73.88.99 8080
HTTPUpload ::1 8080
HTTPUpload f00d::beef:bac0:ca1f 8080

Environment

When the server starts up as the super-user (root), it can increase some resource limits automatically. When not starting as root these directives have no effect.

If you wish to run a server which accepts a very large amount of users (usually not necessary), the amount of connections a server can accept can be limited by the operating system's limits for maximum open file descriptors per process. The FileLimit directive can be used to adjust this limit.

FileLimit 10000

The FileLimit parameter cannot be adjusted by doing a reconfiguration after startup, changing it requires a full restart. aprsc drops root privileges after startup and cannot regain them later to adjust resource limits.

Operator attention span qualification run

The example configuration file contains an invalid configuration directive in the end for the purpose of making sure the operator actually reads through the file and adjusts it to match his needs. If it caught you by surprise, you should probably read through the whole configuration file with some added thought, and cross-reference the configuration directives with this document.

Think of this as the "brown M&M's test" by Van Halen, adapted for the APRS-IS.

Access list (ACL) file format

Some directives in the main configuration can refer to ACL files. ACLs are used to allow and deny connections based on the client's IP address.

If an ACL is not configured for a port listener, all connections will be allowed. If an ACL is configured, the default is to not allow any connections unless an "allow" rule permits it.

Rules in an ACL are processed sequentially, starting from the beginning. The first allow or deny rule matching the address of the connecting client is applied.

The following two IPv6 lines deny the dead:beef:f00d::/48 subnet first, and then allow the rest of the dead:beef::/32 network around it. All other IPv6 connections are denied.

deny  dead:beef:f00d::/48
allow dead:beef::/32

The first two rules allow connections from 192.168.* except for 192.168.1.*, and also allow connections from the host at 10.52.42.3. All other IPv4 connections are denied.

deny 192.168.1.0/24
allow 192.168.0.0/16
allow 10.52.42.3

If prefix length is not specified, a host rule is created (32 bits for IPv4, 128 bits prefix length for IPv6). To configure a rule that matches all addresses you should specify a prefix length of 0 (::/0 for IPv6, 0.0.0.0/0 for IPv4).

ACL files are read and parsed when aprsc starts or reconfigures itself. However, reconfiguration is currently not working, so you'll need to do a full restart after changing ACLs.

The same ACL file can be referenced from multiple main configuration directives to reduce the amount of configuration files. For example, you could have a single "allow.acl" file which would contain allow lines for both IPv4 and IPv6 addresses, and the ACL can then be referred to from both the IPv4 and IPv6 listeners.